Akram Afifi

Performance Analysis of Several GPS/Galileo Precise Point Positioning Models

This paper examines the performance of several precise point positioning (PPP) models, which combine dual-frequency GPS/Galileo observations in the un-differenced and between-satellite single-difference (BSSD) modes. These include the traditional un-differenced model, the decoupled clock model, the semi-decoupled clock model, and the between-satellite single-difference model. We take advantage of the IGS-MGEX network products to correct for the satellite differential code biases and the orbital and satellite clock errors. Natural Resources Canada’s GPSPace PPP software is modified to handle the various GPS/Galileo PPP models. A total of six data sets of GPS and Galileo observations at six IGS stations are processed to examine the performance of the various PPP models. It is shown that the traditional un-differenced GPS/Galileo PPP model, the GPS decoupled clock model, and the semi-decoupled clock GPS/Galileo PPP model improve the convergence time by about 25% in comparison with the un-differenced GPS-only model. In addition, the semi-decoupled GPS/Galileo PPP model improves the solution precision by about 25% compared to the traditional un-differenced GPS/Galileo PPP model. Moreover, the BSSD GPS/Galileo PPP model improves the solution convergence time by about 50%, in comparison with the un-differenced GPS PPP model, regardless of the type of BSSD combination used. As well, the BSSD model improves the precision of the estimated parameters by about 50% and 25% when the loose and the tight combinations are used, respectively, in comparison with the un-differenced GPS-only model. Comparable results are obtained through the tight combination when either a GPS or a Galileo satellite is selected as a reference.

An Innovative Dual Frequency PPP Model for Combined GPS/Galileo Observations

Abstract This paper develops a new dual-frequency precise point positioning model, which combines GPS and Galileo observables. The addition of Galileo satellite system offers more visible satellites to the user, which is expected to enhance the satellite geometry and the overall PPP solution in comparison with GPS-only PPP solution. However, combining GPS and Galileo observables introduces additional biases, which require rigorous modelling, including the GPS to Galileo time offset, and Galileo satellite hardware delay. In this research, a GPS/Galileo ionosphere-free linear combination PPP model is developed. The additional biases of the GPS/Galileo combination are lumped and accounted for through the introduction of a new unknown parameter, inter-systems bias, in the PPP mathematical model. It is shown that a subdecimeter positioning accuracy level and 25% reduction in the solution convergence time can be achieved with the developed GPS/Galileo PPP model.

Precise Point Positioning Using Triple GNSS Constellations in Various Modes

This paper introduces a new dual-frequency precise point positioning (PPP) model, which combines the observations from three different global navigation satellite system (GNSS) constellations, namely GPS, Galileo, and BeiDou. Combining measurements from different GNSS systems introduces additional biases, including inter-system bias and hardware delays, which require rigorous modelling. Our model is based on the un-differenced and between-satellite single-difference (BSSD) linear combinations. BSSD linear combination cancels out some receiver-related biases, including receiver clock error and non-zero initial phase bias of the receiver oscillator. Forming the BSSD linear combination requires a reference satellite, which can be selected from any of the GPS, Galileo, and BeiDou systems. In this paper three BSSD scenarios are tested; each considers a reference satellite from a different GNSS constellation. Natural Resources Canada’s GPSPace PPP software is modified to enable a combined GPS, Galileo, and BeiDou PPP solution and to handle the newly introduced biases. A total of four data sets collected at four different IGS stations are processed to verify the developed PPP model. Precise satellite orbit and clock products from the International GNSS Service Multi-GNSS Experiment (IGS-MGEX) network are used to correct the GPS, Galileo, and BeiDou measurements in the post-processing PPP mode. A real-time PPP solution is also obtained, which is referred to as RT-PPP in the sequel, through the use of the IGS real-time service (RTS) for satellite orbit and clock corrections. However, only GPS and Galileo observations are used for the RT-PPP solution, as the RTS-IGS satellite products are not presently available for BeiDou system. All post-processed and real-time PPP solutions are compared with the traditional un-differenced GPS-only counterparts. It is shown that combining the GPS, Galileo, and BeiDou observations in the post-processing mode improves the PPP convergence time by 25% compared with the GPS-only counterpart, regardless of the linear combination used. The use of BSSD linear combination improves the precision of the estimated positioning parameters by about 25% in comparison with the GPS-only PPP solution. Additionally, the solution convergence time is reduced to 10 minutes for the BSSD model, which represents about 50% reduction, in comparison with the GPS-only PPP solution. The GNSS RT-PPP solution, on the other hand, shows a similar convergence time and precision to the GPS-only counterpart.

An Improved Between-Satellite Single-Difference Precise Point Positioning Model for Combined GPS/Galileo Observations

Abstract This article introduces a new model for precise point positioning (PPP), which combines dual-frequency GPS and Galileo observations. Our model is based on the between-satellite single-difference (BSSD) linear combination, which cancels out some receiver-related biases, including receiver clock error and non-zero initial phase bias of the receiver’s oscillator. Two different scenarios are considered when forming BSSD linear combinations. In the first scenario, either a GPS or a Galileo satellite is selected as a reference for both GPS and Galileo observables. The second scenario, on the other hand, selects two reference satellites: a GPS reference satellite for the GPS observables and a Galileo satellite for the Galileo observables. Natural Resources Canada’s GPSPace PPP software is modified to enable a combined GPS/Galileo PPP solution and to handle the newly introduced biases. A total of 12 data sets representing two-day GPS/Galileo measurements at six IGS stations are processed to verify the developed PPP model. Precise satellite orbit and clock products from the IGS-MGEX network are used to correct both of the GPS and Galileo measurements. It is shown that using one reference satellite to form the BSSD linear combinations improves the precision of the estimated parameters by about 25 % compared with the GPS-only PPP solution. When two reference satellites are used, however, the precision of the estimated parameters improves by about 50 % compared with the GPS-only PPP solution. Additionally, the solution convergence time is reduced to 10 min for both BSSD scenarios, which represents about 50 % improvement in comparison with the GPS-only PPP solution.

Precise Point Positioning Model Using Triple GNSS Constellations: GPS, Galileo and BeiDou

Abstract This paper introduces a comparison between dual-frequency precise point positioning (PPP) post-processing model, which combines the observations of three different GNSS constellations, namely GPS, Galileo, and BeiDou and real-time PPP model. A drawback of a single GNSS system such as GPS, however, is the availability of sufficient number of visible satellites in urban areas. Combining GNSS observations offers more visible satellites to users, which in turn is expected to enhance the satellite geometry and the overall positioning solution. However, combining several GNSS observables introduces additional biases, which require rigorous modelling, including the GNSS time offsets and hardware delays. In this paper, a GNSS post-processing PPPP model is developed using ionosphere-free linear combination. The additional biases of the GPS, Galileo, and BeiDou combination are accounted for through the introduction of a new unknown parameter, which is identified as the inter-system bias, in the PPP mathematical model. Natural Resources Canada’s GPSPace PPP software is modified to enable a combined GPS / Galileo / BeiDou PPP solution and to handle the newly inter-system bias. A total of four data sets at four IGS stations are processed to verify the developed PPP model. Precise satellite orbit and clock products from the IGS-MGEX network are used to correct of the GPS, Galileo and BeiDou measurements. For the real-time PPP model the corrections of the satellites orbit and clock are obtained through the international GNSS service (IGS) real-time service (RTS). GPS and Galileo Observations are used for the GNSS RTS-IGS PPP model as the RTS-IGS satellite products are not available for BeiDou satellites. This paper provides the GNSS RTS-IGS PPP model using different satellite clock corrections namely: IGS01, IGC01, IGS01, and IGS03. All PPP models results of convergence time and positioning precision are compared to the traditional GPS-only PPP model. It is shown that combining GPS, Galileo, and BeiDou observations in a PPP model reduces the convergence time by 25 % compared with the GPS-only PPP model.

Un-differenced precise point positioning model using triple GNSS constellations

Abstract This paper introduces a dual-frequency precise point positioning (PPP) model, which combines the observations of three different global navigation satellite system (GNSS) constellations, namely GPS, Galileo, and BeiDou. A drawback of a single GNSS system such as GPS, however, is the availability of sufficient number of visible satellites in urban areas. Combining GNSS observations offers more visible satellites to users, which in turn is expected to enhance the satellite geometry and the overall positioning solution. However, combining several GNSS observables introduces additional biases, which require rigorous modeling, including the GNSS time offsets and hardware delays. In this paper, un-differenced ionosphere-free linear combination PPP model is developed. The additional biases of the GPS, Galileo, and BeiDou combination are accounted for through the introduction of a new unknown parameter, which is identified as the inter-system bias, in the PPP mathematical model. Natural Resources Canada’s GPSPace PPP software is modified to enable a combined GPS, Galileo, and BeiDou PPP solution and to handle the newly introduced biases. A total of four data-sets collected at four different IGS stations are processed to verify the developed PPP model. Precise satellite orbit and clock products from the International GNSS Service Multi-GNSS Experiment (IGS-MGEX) network are used to correct the GPS, Galileo, and BeiDou measurements. It is shown that the un-differenced GPS-only post-processed PPP solution indicates that the model is capable of obtaining a sub-decimeter-level accuracy. However, the solution takes about 20 min to converge to decimeter-level precision. The convergence time of the combined GNSS post-processed PPP solutions takes about 15 min to reach the decimeter-level precision, which represent a 25% improvement in comparison with the GPS-only post-processed PPP solution.