Alberto Moreira

TanDEM-X: A Satellite Formation for High-Resolution SAR Interferometry

TanDEM-X (TerraSAR-X add-on for digital elevation measurements) is an innovative spaceborne radar interferometer that is based on two TerraSAR-X radar satellites flying in close formation. The primary objective of the TanDEM-X mission is the generation of a consistent global digital elevation model (DEM) with an unprecedented accuracy, which is equaling or surpassing the HRTI-3 specification. Beyond that, TanDEM-X provides a highly reconfigurable platform for the demonstration of new radar imaging techniques and applications. This paper gives a detailed overview of the TanDEM-X mission concept which is based on the systematic combination of several innovative technologies. The key elements are the bistatic data acquisition employing an innovative phase synchronization link, a novel satellite formation flying concept allowing for the collection of bistatic data with short along-track baselines, as well as the use of new interferometric modes for system verification and DEM calibration. The interferometric performance is analyzed in detail, taking into account the peculiarities of the bistatic operation. Based on this analysis, an optimized DEM data acquisition plan is derived which employs the combination of multiple data takes with different baselines. Finally, a collection of instructive examples illustrates the capabilities of TanDEM-X for the development and demonstration of new remote sensing applications.

First demonstration of airborne SAR tomography using multibaseline L-band data

In synthetic aperture radar (SAR) interferometry, the phase differences between two different sensor positions are used to estimate the terrain topography. Although it is possible in this way to find a three-dimensional (3D) surface representation, the distribution of the different scatterers in the height direction at a fixed range and azimuth position remains unknown. Contrary to this, tomographic techniques enable a real geometric resolution capability in the height direction and introduce new possibilities for many applications and inversion problems. Even misinterpretations in SAR images caused by layover and foreshortening effects can be solved by the tomographic processing. In this paper, the successful experimental realization of polarimetric airborne SAR tomography is demonstrated for the first time. The authors present the concept of aperture synthesis for tomographic imaging for the case of a multibaseline imaging geometry and discuss the constraints arising from the limited number of flight tracks. They propose a method for reduction of the height ambiguities associated to the irregular and undersampled spatial distribution of the imaging positions. Finally, they address the experimental requirements for polarimetric airborne SAR tomography and show experimental results using a multibaseline data set acquired in L-band by DLRs experimental SAR (E-SAR) of a test-site near Oberpfaffenhofen, Germany.

Extended chirp scaling algorithm for air- and spaceborne SAR data processing in stripmap and ScanSAR imaging modes

Presents a generalized formulation of the extended chirp scaling (ECS) approach for high precision processing of air- and spaceborne SAR data. Based on the original chirp scaling function, the ECS algorithm incorporates a new azimuth scaling function and a subaperture approach, which allow an effective phase-preserving processing of ScanSAR data without interpolation for azimuth geometric correction. The azimuth scaling can also be used for automatic azimuth coregistration of interferometric image pairs which are acquired with different sampling distances. Additionally, a novel range scaling formulation is proposed for automatic range coregistration of interferometric image pairs or for improved robustness for the processing of highly squinted data. Several simulation and processing results of air- and spaceborne SAR data are presented to demonstrate the validity of the proposed algorithms.

A tutorial on synthetic aperture radar

Synthetic Aperture Radar (SAR) has been widely used for Earth remote sensing for more than 30 years. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications ranging from geoscience and climate change research, environmental and Earth system monitoring, 2-D and 3-D mapping, change detection, 4-D mapping (space and time), security-related applications up to planetary exploration. With the advances in radar technology and geo/bio-physical parameter inversion modeling in the 90s, using data from several airborne and spaceborne systems, a paradigm shift occurred from the development driven by the technology push to the user demand pull. Today, more than 15 spaceborne SAR systems are being operated for innumerous applications. This paper provides first a tutorial about the SAR principles and theory, followed by an overview of established techniques like polarimetry, interferometry and differential interferometry as well as of emerging techniques (e.g., polarimetric SAR interferometry, tomography and holographic tomography). Several application examples including the associated parameter inversion modeling are provided for each case. The paper also describes innovative technologies and concepts like digital beamforming, Multiple-Input Multiple-Output (MIMO) and bi- and multi-static configurations which are suitable means to fulfill the increasing user requirements. The paper concludes with a vision for SAR remote sensing.

Unambiguous SAR signal reconstruction from nonuniform displaced phase center sampling

The displaced phase center (DPC) technique will enable a wide-swath synthetic aperture radar (SAR) with high azimuth resolution. In a classic DPC system, the pulse repetition frequency (PRF) has to be chosen such that the SAR carrier moves just one half of its antenna length between subsequent radar pulses. Any deviation from this PRF will result in a nonuniform sampling of the synthetic aperture. This letter derives an innovative reconstruction algorithm and shows that an unambiguous reconstruction of a SAR signal is possible for nonuniform sampling of the synthetic aperture. This algorithm will also have great potential for multistatic satellite constellations as well as the dual receive antenna mode in Radarsat 2 and TerraSAR-X.

Multidimensional Waveform Encoding: A New Digital Beamforming Technique for Synthetic Aperture Radar Remote Sensing

This paper introduces the innovative concept of multidimensional waveform encoding for spaceborne synthetic aperture radar (SAR). The combination of this technique with digital beamforming on receive enables a new generation of SAR systems with improved performance and flexible imaging capabilities. Examples are high-resolution wide-swath radar imaging with compact antennas, enhanced sensitivity for applications like alongtrack interferometry and moving object indication, and the implementation of hybrid SAR imaging modes that are well suited to satisfy hitherto incompatible user requirements. Implementation-specific issues are discussed and performance examples demonstrate the potential of the new technique for different remote sensing applications.

Errata: Digital Beamforming on Receive: Techniques and Optimization Strategies for High-Resolution Wide-Swath SAR Imaging

Synthetic Aperture Radar (SAR) is a well-proven imaging technique for remote sensing of the Earth. However, conventional SAR systems are not capable of fulfilling the increasing demands for improved spatial resolution and wider swath coverage. To overcome these inherent limitations, several innovative techniques have been suggested which employ multiple receive-apertures to gather additional information along the synthetic aperture. These digital beamforming (DBF) on receive techniques are reviewed with particular emphasis on the multi-aperture signal processing in azimuth and a multi-aperture reconstruction algorithm is presented that allows for the unambiguous recovery of the Doppler spectrum. The impact of Doppler aliasing is investigated and an analytic expression for the residual azimuth ambiguities is derived. Further, the influence of the processing on the signal-to-noise ratio (SNR) is analyzed, resulting in a pulse repetition frequency (PRF) dependent factor describing the SNR scaling of the multi-aperture beamforming network. The focus is then turned to a complete high-resolution wide-swath SAR system design example which demonstrates the intricate connection between multi-aperture azimuth processing and the system architecture. In this regard, alternative processing approaches are compared with the multi-aperture reconstruction algorithm. In a next step, optimization strategies are discussed as pattern tapering, prebeamshaping-on-receive, and modified processing algorithms. In this context, the analytic expressions for both the residual ambiguities and the SNR scaling factor are generalized to cascaded beamforming networks. The suggested techniques can moreover be extended in many ways. Examples discussed are a combination with ScanSAR burst mode operation and the transfer to multistatic sparse array configurations.

Spotlight SAR data processing using the frequency scaling algorithm

This paper presents a new processing algorithm for spotlight SAR data processing. The algorithm performs the range cell migration correction for non-chirped raw data without interpolation by using a novel frequency scaling operation. The azimuth processing is based on a spectral analysis approach which is made highly accurate by azimuth scaling. In almost all processing stages, a subaperture approach is introduced for efficient azimuth processing. In this paper, the complete derivation of the algorithm is presented. A very useful formulation for non-chirped SAR signals in the range Doppler domain is also proposed where the residual video phase is expressed by a chirp convolution. The algorithm performance is shown by several simulations. A spotlight image, which has been extracted from stripmap raw data of the experimental SAR system of DLR, shows the validity of the frequency scaling algorithm.

Processing of Sliding Spotlight and TOPS SAR Data Using Baseband Azimuth Scaling

This paper presents an efficient phase preserving processor for the focusing of data acquired in sliding spotlight and Terrain Observation by Progressive Scans (TOPS) imaging modes. They share in common a linear variation of the Doppler centroid along the azimuth dimension, which is due to a steering of the antenna (either mechanically or electronically) throughout the data take. Existing approaches for the azimuth processing can become inefficient due to the additional processing to overcome the folding in the focused domain. In this paper, a new azimuth scaling approach is presented to perform the azimuth processing, whose kernel is exactly the same for sliding spotlight and TOPS modes. The possibility to use the proposed approach to process data acquired in the ScanSAR mode, as well as a discussion concerning staring spotlight, is also included. Simulations with point targets and real data acquired by TerraSAR-X in sliding spotlight and TOPS modes are used to validate the developed algorithm.

TanDEM-X: a TerraSAR-X add-on satellite for single-pass SAR interferometry

TanDEM-X is a mission proposal for a TerraSAR-X add-on satellite for high-resolution single-pass SAR interferometry. This mission proposal has been selected for a Phase A study within the scope of a Call for Proposals for a next German Earth Observation Mission to be launched in 2008/2009. The mission has the goal of generating a global Digital Elevation Model (DEM) with an accuracy corresponding to the DTED-3 specifications (12 m posting, 2 m relative height accuracy for flat terrain). This goal will be achieved by means of a second, TerraSAR-X like satellite (TanDEM-X) flying in a close orbit configuration with TerraSAR-X. This paper describes the mission concept and requirements, including several innovative aspects like operation modes, orbit selection and maintenance as well as PRF and phase synchronization. Results from a detailed performance estimation show the achievable DEM accuracy. Finally, an overview of the potential of the TanDEM-X mission for several scientific applications is presented.