Albrecht Leonhardt

Synthesis and properties of filled carbon nanotubes

Abstract Single- and multi-walled carbon nanotubes are very interesting nanoscaled materials with many possible applications in nanoelectronics. Especially, nanotubes filled with ferromagnetic materials (Fe, Co, Ni) may have significant potential in data storage. Such structures may help to exceed the best available storage densities (>65 Gb/inch2) and show in the case of Fe-filled nanotubes higher coercivities compared to bulk Fe. In addition, metal-filled carbon nanotubes are promising nanowires with excellent oxidation protection. In this paper we describe the synthesis of Fe-, Ni- and Co-filled carbon nanotubes by using the chemical vapor deposition method. Varying the deposition conditions we have obtained filled nanotubes with relatively uniform core diameters and different thicknesses of the carbon walls. The core diameters vary between 15 and 30 nm and the thickness of the carbon shells between 2 and 60 nm. The length of the tubes amounts up to 30 μm. The filled carbon nanotubes are characterised by scanning and transmission electron microscopy and energy dispersive X-ray analysis. The magnetic behaviour of the aligned Fe-filled tubes is investigated using alternating gradient magnetometry measurements and electron holography. The hysteresis loops indicate a magnetic anisotropy. The coercivity depends on the direction of the applied magnetic field. The observed enhanced coercivities are significantly higher than in bulk Fe.

Carbon nanotubes filled with a chemotherapeutic agent: a nanocarrier mediates inhibition of tumor cell growth

AIM In this paper, carbon nanotubes (CNTs) are presented as feasible carriers for carboplatin, a therapeutic agent for cancer treatment. The drug was introduced into CNTs to demonstrate that they are suited as nanocontainers and nanocarriers and can release the drug to initialize its medical virtue. METHOD The filling was accomplished by a wet-chemical approach after the CNTs were opened. The effect on cell proliferation and cytotoxicity of the carboplatin-filled CNT was investigated by using a viability assays. RESULTS Using different analysis methods such as electron energy loss spectroscopy and x-ray photoelectron spectroscopy the structure of carboplatin incorporated into the CNTs was found to be retained. In vitro studies showed that carboplatin-filled CNTs inhibited growth of bladder cancer cells whereas unfilled, opened CNTs barely affected cancer cell growth. CONCLUSION A reversible filling-emptying process could be performed successfully within this work. This highlights the potential of CNTs for applications in the field of drug delivery.

Hydrogen storage in different carbon nanostructures

Carbon nanostructures of different kinds have been synthesized by chemical vapor deposition. By modifying the deposition temperature, the catalyst material, and the hydrocarbon, nanofibers with herringbone structure, multi-walled nanotubes with tubular structure, and single-walled nanotubes were deposited. The nanostructures were purified with different treatment methods. The carbon nanostructures were characterized using scanning and transmission electron microscopy. The hydrogen storage capability was investigated for all obtained nanostructures. The measurements show that the storage capacity of hydrogen is very limited in all the carbon nanostructures.

Magnetic force microscopy sensors using iron-filled carbon nanotubes

Probes for magnetic force microscopy (MFM) were prepared by pinning iron-filled multiwall carbon nanotubes to conventional scanning force microscopy probes. These nanotube MFM probes reveal a great potential for high spatial resolution of both topography and magnetic stray field. The ends of the high aspect ratio iron nanowires within the nanotubes can be considered as stationary effective magnetic monopole moments which opens the possibility of quantitative stray field measurements in a straightforward manner. The carbon shells around the iron nanowires provide wear resistance and oxidation protection.

Magnetic properties of aligned Fe-filled carbon nanotubes

We report on the magnetic properties of Fe-filled multiwalled carbon nanotubes(MWNTs) grown by chemical vapor deposition(CVD) on Si substrates with ferrocene as precursor. The MWNTs are aligned perpendicularly to the substrate plane. X-ray diffraction analyses indicate the presence of both bcc and fcc iron with a relatively strong texture. Magnetometry measurements show a pronounced magnetic anisotropy with the easy axis perpendicular to the substrate plane and parallel to the axis of the aligned MWNTs, respectively. The low-temperature behavior suggests a negligible coupling between the two iron phases. We accessed the magnetic properties of individual Fe-filled MWNTs by electron holography using a transmission electron microscope(TEM).

Carbon Nanotubes Filled with Ferromagnetic Materials

Carbon nanotubes (CNT) filled with ferromagnetic metals like iron, cobalt or nickel are new and very interesting nanostructured materials with a number of unique properties. In this paper we give an overview about different chemical vapor deposition (CVD) methods for their synthesis and discuss the influence of selected growth parameters. In addition we evaluate possible growth mechanisms involved in their formation. Moreover we show their identified structural and magnetic properties. On the basis of these properties we present different application possibilities. Some selected examples reveal the high potential of these materials in the field of medicine and nanotechnology.

Enhanced magnetism in Fe-filled carbon nanotubes produced by pyrolysis of ferrocene

By optimization of the synthesis of ferromagnetic-filled carbon nanotube ensembles on Si substrates (catalytic decomposition of ferrocene) and following annealing at 645°C, marked hysteresis loops can be measured by the alternating-gradient method. Unusually high coercivities and strong anisotropies with an easy magnetic axis parallel to the alignment of the nanotubes are observed from the as-grown samples, whereas an enhanced magnetic saturation moment (up to a factor of 2) and a decreased anisotropy are realized after annealing at 645°C. The increase of the magnetic saturation moment of the Fe-filled carbon nanotube ensembles is caused by the entire transformation within the tubes of the γ-Fe and Fe3C phases to ferromagnetic α-Fe and graphite. X-ray diffraction with different glancing incidence shows that the γ-Fe is predominantly at the tips of the nanotubes, while the iron carbide resides closer to the substrate. However, after the annealing process only α-Fe is found. At an annealing temperature of 6...

Melt Mixing as Method to Disperse Carbon Nanotubes into Thermoplastic Polymers

Abstract This paper presents melt mixed composites where two ways of introducing nanotubes in polymer matrices were used. In the first case, commercially available masterbatches of nanotube/polymer composites are used as the starting materials that are diluted by the pure polymer in a subsequent melt mixing process (masterbatch dilution method) while in the other case nanotubes are directly incorporated into the polymer matrix. As an example of the masterbatch dilution method, composites of polycarbonate with MWNT are presented which are produced using a Brabender PL‐19 single screw extruder. In this system, electrical percolation was found at about 0.5 wt% MWNT. The nanotube dispersion as observed by TEM investigations is quite homogeneous. The direct incorporation method is discussed in composites of polycarbonate with MWNT and SWNT. For commercial MWNT percolation was found between 1.0 and 3.0 wt% depending on the aspect ratio and purity of the materials. For HiPCO‐SWNT from CNI percolation occurred between 0.25 wt% and 0.5 wt% SWNT. The incorporation of nanotubes significantly changes the stress‐strain behavior of the composites: modulus and stress are enhanced; however, the elongation at break is reduced especially above the percolation concentration.

The carcinogenic effect of various multi-walled carbon nanotubes (MWCNTs) after intraperitoneal injection in rats

BackgroundBiological effects of tailor-made multi-walled carbon nanotubes (MWCNTs) without functionalization were investigated in vivo in a two-year carcinogenicity study. In the past, intraperitoneal carcinogenicity studies in rats using biopersistent granular dusts had always been negative, whereas a number of such studies with different asbestos fibers had shown tumor induction. The aim of this study was to identify possible carcinogenic effects of MWCNTs. We compared induced tumors with asbestos-induced mesotheliomas and evaluated their relevance for humans by immunohistochemical methods.MethodsA total of 500 male Wistar rats (50 per group) were treated once by intraperitoneal injection with 109 or 5 × 109 WHO carbon nanotubes of one of four different MWCNTs suspended in artificial lung medium, which was also used as negative control. Amosite asbestos (108 WHO fibers) served as positive control. Morbid rats were sacrificed and necropsy comprising all organs was performed. Histopathological classification of tumors and, additionally, immunohistochemistry were conducted for podoplanin, pan-cytokeratin, and vimentin to compare induced tumors with malignant mesotheliomas occurring in humans.ResultsTreatments induced tumors in all dose groups, but incidences and times to tumor differed between groups. Most tumors were histologically and immunohistochemically classified as malignant mesotheliomas, revealing a predominantly superficial spread on the serosal surface of the abdominal cavity. Furthermore, most tumors showed invasion of peritoneal organs, especially the diaphragm. All tested MWCNT types caused mesotheliomas. We observed highest frequencies and earliest appearances after treatment with the rather straight MWCNT types A and B. In the MWCNT C groups, first appearances of morbid mesothelioma-bearing rats were only slightly later. Later during the two-year study, we found mesotheliomas also in rats treated with MWCNT D – the most curved type of nanotubes. Malignant mesotheliomas induced by intraperitoneal injection of different MWCNTs and of asbestos were histopathologically and immunohistochemically similar, also compared with mesotheliomas in man, suggesting similar pathogenesis.ConclusionWe showed a carcinogenic effect for all tested MWCNTs. Besides aspect ratio, curvature seems to be an important parameter influencing the carcinogenicity of MWCNTs.

Magnetic sensitivity of a dispersion of aggregated ferromagnetic carbon nanotubes in liquid crystals

Using carbon nanotubes filled with α-Fe, we have shown that aggregated ferronematic colloids demonstrate reliable and very effective response to a weak (<5 mT) magnetic field. The magnetic field realigns the aggregates of the particles which results in a non-threshold reorientation of the LC nearby, leading to the optically observed director distortions. The distortion regions expand with the increase of the magnetic field and achieve maximum size of several micrometres, comparable with the size of the agglomerates. In the non-distorted regions the reorientation of the director begins at the magnetic field reaching the Freedericksz transition value. Taking into account the extreme sensitivity of aggregated ferronematics to magnetic field, the following experimental and theoretical studies of the individual response of the aggregated nanoparticles to magnetic field may became the topical task of the physics and applications of ferronematics.