Alex W. Stedmon

Methodology for evaluating gloves in relation to the effects on hand performance capabilities: a literature review

The present study was conducted to review the literature on the methods that have been considered appropriate for evaluation of the effects of gloves on different aspects of hand performance, to make recommendations for the testing and assessment of gloves, and to identify where further research is needed to improve the evaluation protocols. Eighty-five papers meeting the criteria for inclusion were reviewed. Many studies show that gloves may have negative effects on manual dexterity, tactile sensitivity, handgrip strength, muscle activity and fatigue and comfort, while further research is needed to determine glove effects on pinch strength, forearm torque strength and range of finger and wrist movements. The review also highlights several methodological issues (including consideration of both task type and duration of glove use by workers, guidance on the selection and allocation of suitable glove(s) for particular tasks/jobs, and glove design features) that need to be considered in future research. Practitioner Summary: The relevant literature on the effects of protective gloves on different aspects of hand performance was reviewed to make recommendations for the testing and assessment of gloves, and to improve evaluation protocols. The review highlights research areas and methodological issues that need to be considered in future research.

Unintentional carbon monoxide poisoning in Northwest Iran: a 5-year study.

This paper describes the epidemiology of unintentional carbon monoxide (CO) poisoning in Northwest Iran between 2003 and 2008. Data were obtained from the records of the main provider of emergency medical transportation and from death certificate reports of the Legal Medicine Organization. During the study period, a total of 3078 hospital admissions were recorded against which 346 deaths were due to unintentional CO related poisoning caused by gas appliances in the homes. The ratio of unintentional CO related poisoning cases in relation to all poisonings was 11.6%. With regard to gender differences, non-fatal CO poisoning was higher in females than males, whereas actual fatalities were higher in males than females. Non-fatal CO poisoning was most prevalent in adults aged between 20 and 49 years, whereas the age specific death rate was highest for those over 60 years. The highest frequency of both non-fatal poisonings and actual fatalities occurred in the month January. The results suggest that CO poisoning has a high prevalence in this geographic region, with elderly adults being at the greatest risk, especially during the winter season. This represents a serious, but often neglected area of public health, and Health Authorities should be encouraged to promote public awareness against the dangers of CO exposure. This paper reviews the data and evidence surrounding the issue of CO poisoning and makes recommendations that a range of agencies and authorities should be involved in setting stricter standards and environmental legislations in this respect.

Using pliers in assembly work: short and long task duration effects of gloves on hand performance capabilities and subjective assessments of discomfort and ease of tool manipulation.

The present study investigated the effects of wearing typical industrial gloves on hand performance capabilities (muscle activity, wrist posture, touch sensitivity, hand grip and forearm torque strength) and subjective assessments for an extended duration of performing a common assembly task, wire tying with pliers, which requires a combination of manipulation and force exertion. Three commercially available gloves (cotton, nylon and nitrile gloves) were tested and compared with a bare hand condition while participants performed the simulated assembly task for 2 h. The results showed that wearing gloves significantly increased the muscle activity, wrist deviation, and discomfort whilst reducing hand grip strength, forearm torque strength and touch sensitivity. The combined results showed that the length of time for which gloves are worn does affect hand performance capability and that gloves need to be evaluated in a realistic working context. The results are discussed in terms of selection of gloves for industrial assembly tasks involving pliers.

Association of individual and work-related risk factors with musculoskeletal symptoms among Iranian sewing machine operators.

This cross-sectional study evaluated working conditions and the occurrence of self-reported musculoskeletal symptoms among 251 Iranian sewing machine operators. A questionnaire and direct observations of working postures using the rapid upper limb assessment (RULA) method were used. A high prevalence of musculoskeletal symptoms, particularly in the neck/shoulders, back and hands/wrists were found. The mean RULA grand score of 5.7 highlighted a poor sewing workstation design and indicated that most operators (with posture assessed at action level 3) needed an investigation and changes in their working habits soon. Work-related factors (including number of years worked as an operator, prolonged working hours per shift, long duration of sitting work without a break, feeling pressure due to work and working postures) and individual factors (including age, gender, BMI and regular sport/physical activities) were associated with musculoskeletal symptoms in multiple logistic regression models. The findings add to the understanding of working conditions of those jobs involving sewing activities and emphasise the need for ergonomic interventions to reduce musculoskeletal symptoms in the future.

Short and longer duration effects of protective gloves on hand performance capabilities and subjective assessments in a screw-driving task

The study investigated short and longer duration effects of gloves on hand performance capabilities (muscle activity, dexterity, touch sensitivity, finger pinch and forearm torque strength) and subjective assessments of discomfort and ease of manipulation when performing a light assembly task. The independent variables were hand condition with four levels (wearing cotton, nylon or nitrile gloves as well as barehanded) and point of time within the 2 h duration of the task (with measurements taken at 0, 30, 60, 90 and 120 min). Participants worked with a screwdriver to fit two components together using screws. Wearing gloves significantly increased the muscle activity, pinch strength and discomfort but reduced the dexterity and touch sensitivity. There was also a significant effect of task time on the muscle activity, dexterity, forearm torque strength and touch sensitivity, which indicates that the duration of the task should be an important consideration in glove evaluation studies and in the selection of work gloves. Statement of Relevance:It is important to evaluate the effects of gloves on hand performance capabilities in a working context so that job demands can be taken into account and the most appropriate type of glove be chosen for each task. This study gives recommendations regarding the evaluation and use of gloves for screw-driving tasks.

Micro-generation schemes: user behaviours and attitudes towards energy consumption.

In the last decade, there has been increasing pressure on developed nations to reduce their carbon emissions. Distributed micro-generation (MG) initiatives provide incentives for small-scale renewable energy generation, particularly by residential home-owners. This paper investigates the existing knowledge base to consider if living in a property with on-site renewable electricity generation may affect user attitudes and behaviours. This knowledge is interpreted from a human factors perspective by focussing on individual behaviour and social learning as well as identifying underlying user requirements and user needs. Suggestions are then made with regard to the effects that MG schemes may have on public attitudes and where further research efforts should be focused. There is evidence that renewable energy initiatives are likely to result in a shift in public behaviour, particularly towards reduced energy consumption where mechanisms for increased feedback can act as a facilitator to learning and motivator to change. Practitioner Summary: The role of human factors/ergonomics in supporting renewable energy initiatives has not been fully exploited. A range of case studies explore user needs and awareness of renewable energy, presenting mixed evidence for reduced consumption. However, individual behaviour and social learning can be influenced through increased feedback that acts as a facilitator to change.

Motorcycling experience and hazard perception

Studies of hazard perception skills in car drivers suggest that the ability to spot hazards improves with driving experience. Is this the case with motorcyclists? Sixty-one motorcyclists, split across three groups (novice, experienced and advanced riders) were tested on a hazard perception test containing video clips filmed from the perspective of a motorcyclist. Response times to hazards revealed that the advanced riders (who had completed an advanced riding course) were the fastest, and the experienced riders were the slowest to respond to hazards, with novice riders falling in-between. Advanced riders were also found to make more internal attributions regarding the causes of the hazards than novice riders (though on a general measure of Locus of Control there was no difference between groups). The results demonstrate a link between advanced training and motorcycling hazard perception skill, but raise important concerns about the effects of mere experience on rider safety. This challenges previous conceptions that simply extrapolated from our understanding of the hazard perception skills of car drivers to this particularly vulnerable group of road users.

To delegate or not to delegate: A review of control frameworks for autonomous cars.

There have been significant advances in technology and automated systems that will eventually see the use of autonomous cars as commonplace on our roads. Various systems are already available that provide the driver with different levels of decision support. This paper highlights the key human factors issues associated with the interaction between the user and an autonomous system, including assistive decision support and the delegation of authority to the automobile. The level of support offered to the driver can range from traditional automated assistance, to system generated guidance that offers advice for the driver to act upon, and even more direct action that is initiated by the system itself without driver intervention. In many of these instances the role of the driver is slowly moving towards a supervisory role within a complex system rather than one of direct control of the vehicle. Different paradigms of interaction are considered and focus is placed on the partnership that takes place between the driver and the vehicle. Drawing on the wealth of knowledge that exists within the aviation domain and research literature that examines technology partnerships within the cockpit, this paper considers important factors that will assist the automotive community to understand the underlying issues of the human and their interaction within complex systems.

Developing speech input for virtual reality applications: A reality based interaction approach

An input device should be natural and convenient for a user to transmit information to a computer, and should be designed from an understanding of the task to be performed and the interrelationship between the task and the device from the perspective of the user. In order to investigate the potential of speech input as a reality based interaction device, this paper presents the findings of a study that investigated speech input in a VR application. Two independent user trials were combined within the same experimental design to evaluate the commands that users employed when they used free speech in which they were not restricted to a specific vocabulary. The study also investigated when participants were told they were either talking to a machine (e.g. a speech recognition system) or instructing another person to complete a VR based task. Previous research has illustrated that when users are limited to a specific vocabulary, this can alter the interaction style employed. The findings from this research illustrate that the interaction style users employ are very different when they are told they are talking to a machine or another person. Using this knowledge, recommendations can be drawn for the development of speech input vocabularies for future VR applications.

‘MotorcycleSim’: An Evaluation of Rider Interaction with an Innovative Motorcycle Simulator

This paper describes a user-centred design process that has been used to develop an innovative simulator for research into motorcycle ergonomics and rider human factors. Building on initial user requirements and user experience elicitation exercises, an evaluation was conducted to investigate specificissuesassociatedwithsimulatorfidelity.Anexperimentalapproachwasemployedtoexamine the physical and functional fidelity of the simulator. Using different steering and visual feedback configurations, a battery of objective and subjective dependent variables were analysed including: user perceptions and preferences, rider performance data, rider workload, rider comfort issues and thefirstevaluationofsimulatorsicknessforamotorcyclesimulator.Theresultsindicatedthatacrossa number of measures, aspects of functional fidelity were considered more important than the physical fidelity of the simulator. This evaluation takes the development of the simulator a stage further and the paper provides recommendations for future improvements.