Alexander Gogos

Nanomaterials in Plant Protection and Fertilization: Current State, Foreseen Applications, and Research Priorities

Scientific publications and patents on nanomaterials (NM) used in plant protection or fertilizer products have exponentially increased since the millennium shift. While the United States and Germany have published the highest number of patents, Asian countries released most scientific articles. About 40% of all contributions deal with carbon-based NM, followed by titanium dioxide, silver, silica, and alumina. Nanomaterials come in many diverse forms (surprisingly often ≫100 nm), from solid doped particles to (often nonpersistent) polymer and oil-water based structures. Nanomaterials serve equally as additives (mostly for controlled release) and active constituents. Product efficiencies possibly increased by NM should be balanced against enhanced environmental NM input fluxes. The dynamic development in research and its considerable public perception are in contrast with the currently still very small number of NM-containing products on the market. Nanorisk assessment and legislation are largely in their infancies.

Potential of hyperspectral imaging microscopy for semi-quantitative analysis of nanoparticle uptake by protozoa.

Hyperspectral imaging with enhanced darkfield microscopy (HSI-M) possesses unique advantages in its simplicity and non-invasiveness. In consideration of the urgent need for profound knowledge on the behavior and effects of engineered nanoparticles (NPs), here, we determined the capability of HSI-M for examining cellular uptake of different metal-based NPs, including nanosized metals (silver and gold, both citrate stabilized), metal oxides (copper oxide and titanium dioxide), and CdSe/ZnS core/shell quantum dots at subtoxic concentrations. Specifically, we demonstrated that HSI-M can be used to detect and semi-quantify these NPs in the ciliated protozoan Tetrahymena thermophila as a model aquatic organism. Detection and semi-quantification were achieved on the basis of spectral libraries for the NPs suspended in extracellular substances secreted by this single-celled organism, accounting for matrix effects. HSI-M was able to differentiate between NP types, provided that spectral profiles were significantly different from each other. This difference, in turn, depended upon NP type, size, agglomeration status, and position relative to the focal plane. As an exception among the NPs analyzed in this study, titanium dioxide NPs showed spectral similarities compared to cell material of unexposed control cells, leading to false positives. High biological variability resulted in highly variable uptake of NPs in cells of the same sample as well as between different exposures. We therefore encourage the development of techniques able to reduce the currently long analysis times that still hamper the acquisition of statistically strong data sets. Overall, this study demonstrates the potential and challenges of HSI-M in monitoring cellular uptake of synthetic NPs.

Quantification of Carbon Nanotubes in Environmental Matrices: Current Capabilities, Case Studies, and Future Prospects

Carbon nanotubes (CNTs) have numerous exciting potential applications and some that have reached commercialization. As such, quantitative measurements of CNTs in key environmental matrices (water, soil, sediment, and biological tissues) are needed to address concerns about their potential environmental and human health risks and to inform application development. However, standard methods for CNT quantification are not yet available. We systematically and critically review each component of the current methods for CNT quantification including CNT extraction approaches, potential biases, limits of detection, and potential for standardization. This review reveals that many of the techniques with the lowest detection limits require uncommon equipment or expertise, and thus, they are not frequently accessible. Additionally, changes to the CNTs (e.g., agglomeration) after environmental release and matrix effects can cause biases for many of the techniques, and biasing factors vary among the techniques. Five case studies are provided to illustrate how to use this information to inform responses to real-world scenarios such as monitoring potential CNT discharge into a river or ecotoxicity testing by a testing laboratory. Overall, substantial progress has been made in improving CNT quantification during the past ten years, but additional work is needed for standardization, development of extraction techniques from complex matrices, and multimethod comparisons of standard samples to reveal the comparability of techniques.

Assessment of suitability of tree species for the production of biomass on trace element contaminated soils.

To alleviate the demand on fertile agricultural land for production of bioenergy, we investigated the possibility of producing biomass for bioenergy on trace element (TE) contaminated land. Soil samples and plant tissues (leaves, wood and bark) of adult willow (Salix sp.), poplar (Populus sp.), and birch (Betula pendula) trees were collected from five contaminated sites in France and Germany and analysed for Zn, Cd, Pb, Cu, Ca, and K. Cadmium concentration in tree leaves were correlated with tree species, whereas Zn concentration in leaves was site correlated. Birch revealed significantly lower leaf Cd concentrations (1.2-8.9 mg kg(-1)) than willow and poplar (5-80 mg kg(-1)), thus posing the lowest risk for TE contamination of surrounding areas. Birch displayed the lowest bark concentrations for Ca (2300-6200 mg kg(-1)) and K (320-1250 mg kg(-1)), indicating that it would be the most suitable tree species for fuel production, as high concentrations of K and Ca decrease the ash melting point which results in a reduced plant lifetime. Due to higher TE concentrations in bark compared to wood a small bark proportion in relation to the trunk is desirable. In general the bark proportion was reduced with the tree age. In summary, birch was amongst the investigated species the most suitable for biomass production on TE contaminated land.

Capabilities of asymmetric flow field-flow fractionation coupled to multi-angle light scattering to detect carbon nanotubes in soot and soil

Analytical detection and quantification of multi-walled carbon nanotubes (MWCNTs) in complex matrices such as soils is very challenging. In an initial approach to this task, we identify MWCNTs by making use of their different (e.g., rod-like) shape compared to other (native) soil particles and in particular soot, which is ubiquitously present in soils. A shape factor ρ, determined using asymmetric flow field-flow fractionation coupled to multi-angle light scattering (aF4-MALS), was used to discriminate MWCNTs of different aspect ratios, as well as mixtures of soot and MWCNTs, in pure suspensions. MALS results were additionally confirmed using automated electron microscopy image analysis. We then analyzed different soil types which consistently showed ρ-values that differed from pure MWCNTs. To test the performance of the method for MWCNT detection in such complex matrices, we conducted standard additions of a MWCNT as well as soot to an agricultural soil. Extracts from these MWCNT-spiked soils showed increased ρ-values compared to soot-spiked or native soil. The method detection limit for the MWCNT was 1.6 to 4.0 mg g−1 soil and lies within the range of commonly used black carbon quantification methods, but is much higher than any currently predicted environmental concentration. Additionally, the method is currently limited by a relatively narrow dynamic range of ρ. Despite these limitations, our results suggest that aF4-MALS provides specific shape information that may be linked to an actual MWCNT presence in soils. Further method improvement potential is outlined along different steps of the workflow.

A critical evaluation of nanopesticides and nanofertilizers against their conventional analogues

Among a wide range of possible applications of nanotechnology in agriculture, there has been a particular interest in developing novel nanoagrochemicals. While some concerns have been expressed regarding altered risk profile of the new products, many foresee a great potential to support the necessary increase in global food production in a sustainable way. A critical evaluation of nanoagrochemicals against conventional analogues is essential to assess the associated benefits and risks. In this assessment, recent literature was critically analysed to determine the extent to which nanoagrochemicals differ from conventional products. Our analysis was based on 78 published papers and shows that median gain in efficacy relative to conventional products is about 20–30%. Environmental fate of agrochemicals can be altered by nanoformulations, but changes may not necessarily translate in a reduction of the environmental impact. Many studies lacked nano-specific quality assurance and adequate controls. Currently, there is no comprehensive study in the literature that evaluates efficacy and environmental impact of nanoagrochemicals under field conditions. This is a crucial knowledge gap and more work will thus be necessary for a sound evaluation of the benefits and new risks that nanoagrochemicals represent relative to existing products.Analysis of existing data on nanofertilizers and nanopesticides show that they have a gain in efficacy with respect to conventional products, but more data are necessary to evaluate all risks and benefits of using these materials in agriculture.

Effects of Titanium Dioxide Nanoparticles on Red Clover and Its Rhizobial Symbiont

Titanium dioxide nanoparticles (TiO2 NPs) are in consideration to be used in plant protection products. Before these products can be placed on the market, ecotoxicological tests have to be performed. In this study, the nitrogen fixing bacterium Rhizobium trifolii and red clover were exposed to two TiO2 NPs, i.e., P25, E171 and a non-nanomaterial TiO2. Growth of both organisms individually and their symbiotic root nodulation were investigated in liquid and hydroponic systems. While 23 and 18 mg l-1 of E171 and non-nanomaterial TiO2 decreased the growth rate of R. trifolii by 43 and 23% respectively, P25 did not cause effects. Shoot length of red clover decreased between 41 and 62% for all tested TiO2 NPs. In 21% of the TiO2 NP treated plants, no nodules were found. At high concentrations certain TiO2 NPs impaired R. trifolii as well as red clover growth and their symbiosis in the hydroponic systems.

Sulfidation kinetics of copper oxide nanoparticles

Sulfidation of copper oxide nanoparticles (CuO NPs) in urban wastewater systems is expected to influence their impact on the environment. However, the kinetics of this reaction has not been studied to date and the reaction mechanism remains largely unexplored. We therefore investigated the sulfidation kinetics of CuO NPs reacted with bisulfide (HS−) at concentrations relevant to wastewater systems. Pristine CuO NPs (50 nm, 7.7 μM) were reacted with HS− (26.4–105.6 μM) in oxic solutions buffered to pH 8.0. The reaction progress was monitored using silver nitrate to quench the reaction and selectively dissolve the copper sulfides (CuxS) and zincon to spectrophotometrically quantify the released Cu2+. In addition, the reaction products were characterized at selected time points using analytical electron microscopy and X-ray absorption spectroscopy (XAS). The sulfidation rate of the CuO NPs was best described by a pseudo first order rate law and the corresponding half-life times ranged between 1 and 6 minutes. XAS results showed that crystalline CuO NPs rapidly transformed into amorphous CuxS and gradually into crystalline CuS (covellite). The comparable size of pristine and transformed primary particles, the similar morphology of their aggregates, and the initial formation of CuO–CuxS core–shell structures revealed by analytical electron microscopy suggest that the initial sulfidation occurred via a direct conversion reaction mechanism. Our findings suggest that CuO NPs released from various sources into wastewater will rapidly transform into amorphous CuxS and eventually recrystallize into covellite.

Influence of organic compounds on the sulfidation of copper oxide nanoparticles

Dissolved organic matter (DOM) influences the colloidal properties of engineered nanomaterials (ENMs) and impacts their transport and transformation in the environment. Sulfidation affects the fate and the ecological effects of released chalcophile ENMs. For copper oxide nanoparticles (CuO-NPs), the sulfidation and its kinetics have been described. However, the influence of DOM on this reaction has not been investigated yet. In wastewater systems, having high bisulfide contents, the DOM mainly consists of proteins, polysaccharides and humic substances. We therefore investigated the influence of the organic compounds bovine serum albumin (BSA, model protein), alginate (ALG, model polysaccharide), and polyacrylic acid (PAA, natural organic matter analogue) as well as that of natural humic acid (HA) and filtered wastewater (FW) on the sulfidation of CuO-NPs. Experiments were conducted in solutions buffered to pH 8.0 at concentrations of 1.3 mM CuO and ∼3.2 mM HS−. Increasing amounts of organic compounds were added to reach concentrations of 10–1000 mg L−1. Reacted CuO-NPs were collected at selected time points and characterized using Cu K-edge X-ray absorption spectroscopy and analytical electron microscopy. The sulfidation of the CuO-NPs was complete after 3 h in all experiments, except in the presence of 1000 mg L−1 BSA where ∼30% of CuO remained untransformed. Complete sulfidation of the CuO-NPs as observed in experiments conducted in FW suggests quantitative sulfidation of CuO-NPs in real wastewater. Without organic compounds, initially formed amorphous CuxS transformed into covellite over time. The presence of BSA, HA, ALG, and FW (but not PAA) hampered this transformation resulting in higher fractions of CuxS after sulfidation. Different amounts of CuxS with sizes of 10 kDa up to 10 nm formed during sulfidation depending on the type of organic compound. The properties of the CuxS-NPs formed by CuO-NP sulfidation must be considered when assessing their environmental impact.