Alexander J. Marsden

Sulfur‐Functionalized Graphene Oxide by Epoxide Ring‐Opening

The treatment of graphene oxide (GO) with potassium thioacetate followed by an aqueous work-up yields a new material via the ring-opening of the epoxide groups. The new material is a thiol-functionalized GO (GO-SH) which is able to undergo further functionalization. Reaction with butyl bromide gives another new material, GO-SBu, which shows significantly enhanced thermal stability compared to both GO and GO-SH. The thiol-functionalized GO material showed a high affinity for gold, as demonstrated by the selective deposition of a high density of gold nanoparticles.

Weak mismatch epitaxy and structural feedback in graphene growth on copper foil

AbstractGraphene growth by low-pressure chemical vapor deposition on low cost copper foils shows great promise for large scale applications. It is known that the local crystallography of the foil influences the graphene growth rate. Here we find an epitaxial relationship between graphene and copper foil. Interfacial restructuring between graphene and copper drives the formation of (n10) facets on what is otherwise a mostly Cu(100) surface, and the facets in turn influence the graphene orientations from the onset of growth. Angle resolved photoemission shows that the electronic structure of the graphene is decoupled from the copper indicating a weak interaction between them. Despite this, two preferred orientations of graphene are found, ±8° from the Cu[010] direction, creating a non-uniform distribution of graphene grain boundary misorientation angles. Comparison with the model system of graphene growth on single crystal Cu(110) indicates that this orientational alignment is due to mismatch epitaxy. Despite the differences in symmetry the orientation of the graphene is defined by that of the copper. We expect these observations to not only have importance for controlling and understanding the growth process for graphene on copper, but also to have wider implications for the growth of two-dimensional materials on low cost metal substrates.

Determination of band offsets, hybridization, and exciton binding in 2D semiconductor heterostructures

Photoemission measurements on exfoliated 2D heterostructures reveal detailed electronic structure and hybridization effects. Combining monolayers of different two-dimensional semiconductors into heterostructures creates new phenomena and device possibilities. Understanding and exploiting these phenomena hinge on knowing the electronic structure and the properties of interlayer excitations. We determine the key unknown parameters in MoSe2/WSe2 heterobilayers by using rational device design and submicrometer angle-resolved photoemission spectroscopy (μ-ARPES) in combination with photoluminescence. We find that the bands in the K-point valleys are weakly hybridized, with a valence band offset of 300 meV, implying type II band alignment. We deduce that the binding energy of interlayer excitons is more than 200 meV, an order of magnitude higher than that in analogous GaAs structures. Hybridization strongly modifies the bands at Γ, but the valence band edge remains at the K points. We also find that the spectrum of a rotationally aligned heterobilayer reflects a mixture of commensurate and incommensurate domains. These results directly answer many outstanding questions about the electronic nature of MoSe2/WSe2 heterobilayers and demonstrate a practical approach for high spectral resolution in ARPES of device-scale structures.

Friction force microscopy: a simple technique for identifying graphene on rough substrates and mapping the orientation of graphene grains on copper

At a single atom thick, it is challenging to distinguish graphene from its substrate using conventional techniques. In this paper we show that friction force microscopy (FFM) is a simple and quick technique for identifying graphene on a range of samples, from growth substrates to rough insulators. We show that FFM is particularly effective for characterizing graphene grown on copper where it can correlate the graphene growth to the three-dimensional surface topography. Atomic lattice stick-slip friction is readily resolved and enables the crystallographic orientation of the graphene to be mapped nondestructively, reproducibly and at high resolution. We expect FFM to be similarly effective for studying graphene growth on other metal/locally crystalline substrates, including SiC, and for studying growth of other two-dimensional materials such as molybdenum disulfide and hexagonal boron nitride.

van der Waals epitaxy of monolayer hexagonal boron nitride on copper foil: growth, crystallography and electronic band structure

We investigate the growth of hexagonal boron nitride (h-BN) on copper foil by low pressure chemical vapour deposition (LP-CVD). At low pressure, h-BN growth proceeds through the nucleation and growth of triangular islands. Comparison between the orientation of the islands and the local crystallographic orientation of the polycrystalline copper foil reveals an epitaxial relation between the copper and h-BN, even on Cu(100) and Cu(110) regions whose symmetry is not matched to the h-BN. However, the growth rate is faster and the islands more uniformly oriented on Cu(111) grains. Angle resolved photoemission spectroscopy measurements reveal a well-defined band structure for the h-BN, consistent with a band gap of 6 eV, that is decoupled from the copper surface beneath. These results indicate that, despite a weak interaction between h-BN and copper, van der Waals epitaxy defines the long range ordering of h-BN even on polycrystalline copper foils and suggest that large area, single crystal, monolayer h-BN could be readily and cheaply produced.

Effect of oxygen and nitrogen functionalization on the physical and electronic structure of graphene

Covalent functionalization of graphene offers opportunities for tailoring its properties and is an unavoidable consequence of some graphene synthesis techniques. However, the changes induced by the functionalization are not well understood. By using atomic sources to control the extent of the oxygen and nitrogen functionalization, we studied the evolution in the structure and properties at the atomic scale. Atomic oxygen reversibly introduces epoxide groups whilst, under similar conditions, atomic nitrogen irreversibly creates diverse functionalities including substitutional, pyridinic, and pyrrolic nitrogen. Atomic oxygen leaves the Fermi energy at the Dirac point (i.e., undoped), whilst atomic nitrogen results in a net n-doping; however, the experimental results are consistent with the dominant electronic effect for both being a transition from delocalized to localized states, and hence the loss of the signature electronic structure of graphene.

Covalently Binding Atomically Designed Au9 Clusters to Chemically Modified Graphene

Atomic-resolution transmission electron microscopy was used to identify individual Au9 clusters on a sulfur-functionalized graphene surface. The clusters were preformed in solution and covalently attached to the surface without any dispersion or aggregation. Comparison of the experimental images with simulations allowed the rotational motion, without lateral displacement, of individual clusters to be discerned, thereby demonstrating a robust covalent attachment of intact clusters to the graphene surface.

Adsorbate-Induced Curvature and Stiffening of Graphene

The adsorption of the alkane tetratetracontane (TTC, C44H90) on graphene induces the formation of a curved surface stabilized by a gain in adsorption energy. This effect arises from a curvature-dependent variation of a moiré pattern due to the mismatch of the carbon–carbon separation in the adsorbed molecule and the period of graphene. The effect is observed when graphene is transferred onto a deformable substrate, which in our case is the interface between water layers adsorbed on mica and an organic solvent, but is not observed on more rigid substrates such as boron nitride. Our results show that molecular adsorption can be influenced by substrate curvature, provide an example of two-dimensional molecular self-assembly on a soft, responsive interface, and demonstrate that the mechanical properties of graphene may be modified by molecular adsorption, which is of relevance to nanomechanical systems, electronics, and membrane technology.

Enhanced Photoluminescence of Solution-Exfoliated Transition Metal Dichalcogenides by Laser Etching

Using a conventional Raman experimental apparatus, we demonstrate that the photoluminescent (PL) yield from ultrasonication-exfoliated transition metal dichalcogenides (TMDs) (MoS2 and WS2) can be increased by up to 8-fold by means of a laser etching procedure. This laser etching process allows us to controllably pattern and reduce the number of layers of the solution-exfoliated material, overcoming the key drawback to solvent-based exfoliation of two-dimensional (2D) semiconducting materials for applications in optoelectronics. The successful laser thinning of the exfoliated 2D crystals was investigated systematically by changes in both Raman and PL spectra. A simple proof-of-principle of the scalability of this laser etching technique for solution-exfoliated TMD crystals was also demonstrated. As well as being applicable for individual materials, it is also possible to use this simple laser etching technique to investigate the structure of solution-generated van der Waals heterostructures, consisting of layers of both MoS2 and WS2.