Neil R. Wilson

Graphene Oxide: Structural Analysis and Application as a Highly Transparent Support for Electron Microscopy

We report on the structural analysis of graphene oxide (GO) by transmission electron microscopy (TEM). Electron diffraction shows that on average the underlying carbon lattice maintains the order and lattice-spacings of graphene; a structure that is clearly resolved in 80 kV aberration-corrected atomic resolution TEM images. These results also reveal that single GO sheets are highly electron transparent and stable in the electron beam, and hence ideal support films for the study of nanoparticles and macromolecules by TEM. We demonstrate this through the structural analysis of physiological ferritin, an iron-storage protein.

The Real Graphene Oxide Revealed: Stripping the Oxidative Debris from the Graphene-like Sheets†

It′ll come out in the wash! Graphene oxide has been shown to be a stable complex of oxidative debris (red ellipses in the picture) strongly adhered to functionalized graphene-like sheets. Under basic conditions the oxidative debris is stripped from the graphene-like sheets, and the resulting graphene oxide is conducting and cannot easily be resuspended in water.

Carbon nanotube tips for atomic force microscopy

The development of atomic force microscopy (AFM) over the past 20 years has had a major impact on materials science, surface science and various areas of biology, and it is now a routine imaging tool for the structural characterization of surfaces. The lateral resolution in AFM is governed by the shape of the tip and the geometry of the apex at the end of the tip. Conventional microfabrication routes result in pyramid-shaped tips, and the radius of curvature at the apex is typically less than 10 nm. As well as producing smaller tips, AFM researchers want to develop tips that last longer, provide faithful representations of complex surface topographies, and are mechanically non-invasive. Carbon nanotubes have demonstrated considerable potential as AFM tips but they are still not widely adopted. This review traces the history of carbon nanotube tips for AFM, the applications of these tips and research to improve their performance.

High Broad‐Band Photoresponsivity of Mechanically Formed InSe–Graphene van der Waals Heterostructures

High broad‐band photoresponsivity of mechanically formed InSe–graphene van der Waals heterostructures is achieved by exploiting the broad‐band transparency of graphene, the direct bandgap of InSe, and the favorable band line up of InSe with graphene. The photoresponsivity exceeds that for other van der Waals heterostructures and the spectral response extends from the near‐infrared to the visible spectrum.

Structural reorganization of cylindrical nanoparticles triggered by polylactide stereocomplexation

Co-crystallization of polymers with different configurations/tacticities provides access to materials with enhanced performance. The stereocomplexation of isotactic poly(L-lactide) and poly(D-lactide) has led to improved properties compared with each homochiral material. Herein, we report the preparation of stereocomplex micelles from a mixture of poly(L-lactide)-b-poly(acrylic acid) and poly(D-lactide)-b-poly(acrylic acid) diblock copolymers in water via crystallization-driven self-assembly. During the formation of these stereocomplex micelles, an unexpected morphological transition results in the formation of dense crystalline spherical micelles rather than cylinders. Furthermore, mixture of cylinders with opposite homochirality in either THF/H2O mixtures or in pure water at 65 °C leads to disassembly into stereocomplexed spherical micelles. Similarly, a transition is also observed in a related PEO-b-PLLA/PEO-b-PDLA system, demonstrating wider applicability. This new mechanism for morphological reorganization, through competitive crystallization and stereocomplexation and without the requirement for an external stimulus, allows for new opportunities in controlled release and delivery applications.

Physical Vapor Deposition of Metal Nanoparticles on Chemically Modified Graphene: Observations on Metal–Graphene Interactions

The growth of metallic nanoparticles formed on chemically modified graphene (CMG) by physical vapor deposition is investigated. Fine control over the size (down to ∼1.5 nm for Au) and coverage (up to 5 × 10(4) μm(-2) for Au) of nanoparticles can be achieved. Analysis of the particle size distributions gives evidence for Au nanocluster diffusion at room temperature, while particle size statistics differ clearly between metal deposited on single- and multilayer regions. The morphology of the nanoparticles varies markedly for different metals (Ag, Au, Fe, Pd, Pt, Ti), from a uniform thin film for Ti to a droplet-like growth for Ag. A simple model explains these morphologies, based only on consideration of 1) the different energy barriers to surface diffusion of metal adatoms on graphene, and 2) the ratio of the bulk cohesive energy of the metal to the metal-graphene binding energy. Understanding these interactions is important for controlling nanoparticle and thin-film growth on graphene, and for understanding the resultant charge transfer between metal and graphene.

Sulfur‐Functionalized Graphene Oxide by Epoxide Ring‐Opening

The treatment of graphene oxide (GO) with potassium thioacetate followed by an aqueous work-up yields a new material via the ring-opening of the epoxide groups. The new material is a thiol-functionalized GO (GO-SH) which is able to undergo further functionalization. Reaction with butyl bromide gives another new material, GO-SBu, which shows significantly enhanced thermal stability compared to both GO and GO-SH. The thiol-functionalized GO material showed a high affinity for gold, as demonstrated by the selective deposition of a high density of gold nanoparticles.

Weak mismatch epitaxy and structural feedback in graphene growth on copper foil

AbstractGraphene growth by low-pressure chemical vapor deposition on low cost copper foils shows great promise for large scale applications. It is known that the local crystallography of the foil influences the graphene growth rate. Here we find an epitaxial relationship between graphene and copper foil. Interfacial restructuring between graphene and copper drives the formation of (n10) facets on what is otherwise a mostly Cu(100) surface, and the facets in turn influence the graphene orientations from the onset of growth. Angle resolved photoemission shows that the electronic structure of the graphene is decoupled from the copper indicating a weak interaction between them. Despite this, two preferred orientations of graphene are found, ±8° from the Cu[010] direction, creating a non-uniform distribution of graphene grain boundary misorientation angles. Comparison with the model system of graphene growth on single crystal Cu(110) indicates that this orientational alignment is due to mismatch epitaxy. Despite the differences in symmetry the orientation of the graphene is defined by that of the copper. We expect these observations to not only have importance for controlling and understanding the growth process for graphene on copper, but also to have wider implications for the growth of two-dimensional materials on low cost metal substrates.

A simple approach to characterizing block copolymer assemblies: graphene oxide supports for high contrast multi-technique imaging.

Block copolymers are well-known to self-assemble into a range of 3-dimensional morphologies. However, due to their nanoscale dimensions, resolving their exact structure can be a challenge. Transmission electron microscopy (TEM) is a powerful technique for achieving this, but for polymeric assemblies chemical fixing/staining techniques are usually required to increase image contrast and protect specimens from electron beam damage. Graphene oxide (GO) is a robust, water-dispersable, and nearly electron transparent membrane: an ideal support for TEM. We show that when using GO supports no stains are required to acquire high contrast TEM images and that the specimens remain stable under the electron beam for long periods, allowing sample analysis by a range of electron microscopy techniques. GO supports are also used for further characterization of assemblies by atomic force microscopy. The simplicity of sample preparation and analysis, as well as the potential for significantly increased contrast background, make GO supports an attractive alternative for the analysis of block copolymer assemblies.

Imaging the structure, symmetry, and surface-inhibited rotation of polyoxometalate ions on graphene oxide

Atomic-resolution imaging of discrete [γ-SiW10O36]8- lacunary Keggin ions dispersed onto monolayer graphene oxide (GO) films by low voltage aberration corrected transmission electron microscopy is described. Under low electron beam dose, individual anions remain stationary for long enough that a variety of projections can be observed and structural information extracted with ca. ± 0.03 nm precision. Unambiguous assignment of the orientation of individual ions with respect to the point symmetry elements can be determined. The C2v symmetry [γ-SiW10O36]8- ion was imaged along its 2-fold C2 axis or orthogonally with respect to one of two nonequivalent mirror planes (i.e., σv). Continued electron beam exposure of a second ion imaged orthogonal to σv causes it to translate and/or rotate in an inhibited fashion so that the ion can be viewed in different relative orientations. The inhibited surface motion of the anion, which is in response to H-bonding-type interactions, reveals an important new property for GO in that it demonstrably behaves as a chemically modified (i.e., rather than chemically neutral) surface in electron microscopy. This behavior indicates that GO has more in common with substrates used in imaging techniques such as atomic force microscopy and scanning tunneling microscopy, and this clearly sets it apart from other support films used in transmission electron microscopy.