Alexander P. Teng

Development of an In Situ Thermal Desorption Gas Chromatography Instrument for Quantifying Atmospheric Semi-Volatile Organic Compounds

Semi-volatile organic compounds (SVOCs) play a significant role in the formation of secondary organic aerosol, but their atmospheric abundance and chemical composition are poorly understood. We have developed a new system for the thermal desorption aerosol gas chromatograph (TAG) that extends its capability to quantitatively speciate SVOCs (semi-volatile TAG) having vapor pressures lower than tetradecane (C14) with hourly time resolution. The key component is a passivated stainless steel fiber filter that quantitatively collects both gas and particle phase organic compounds. A separation between gas and particle phase collection is determined through a difference method by periodically sampling ambient air through a multichannel charcoal denuder that efficiently removes gas-phase compounds. Measurements made with this new instrument will provide constraints on the abundance, chemical composition, and gas-to-particle partitioning of atmospheric SVOCs and provide opportunities to improve our understanding of secondary organic aerosol formation in the atmosphere. Copyright 2013 American Association for Aerosol Research

Thermal Desorption Comprehensive Two-Dimensional Gas Chromatography: An Improved Instrument for In-Situ Speciated Measurements of Organic Aerosols

The organic fraction is a major constituent of fine atmospheric particulate matter, though its chemical composition is complex and not well understood. This complexity presents an extreme analytical challenge and is well suited to analysis by comprehensive two-dimensional gas chromatography (GC × GC). This has recently been coupled to a thermal desorption aerosol gas (TAG) chromatograph instrument to provide improved in-situ, hourly measurement of speciated organic compounds in atmospheric aerosols (2D-TAG). The original 2D-TAG instrument utilized a flame ionization detector, dual-stage modulator, and a second-dimension column that proved to be thermally unstable under optimal analysis conditions, which limited compound identification, instrument robustness, and time resolution. In this paper, we address these shortcomings by demonstrating the successful integration of a time-of-flight mass spectrometer (TOFMS), development of a simplified hybrid thermo-pneumatic modulator, and incorporation of a more thermally stable secondary column. These improvements resulted in an instrument capable of providing detailed speciated information of organic tracer compounds in atmospheric aerosols in near real time.

Isoprene NO3 Oxidation Products from the RO2 + HO2 Pathway

We describe the products of the reaction of the hydroperoxy radical (HO(2)) with the alkylperoxy radical formed following addition of the nitrate radical (NO(3)) and O(2) to isoprene. NO(3) adds preferentially to the C(1) position of isoprene (>6 times more favorably than addition to C(4)), followed by the addition of O(2) to produce a suite of nitrooxy alkylperoxy radicals (RO(2)). At an RO(2) lifetime of ∼30 s, δ-nitrooxy and β-nitrooxy alkylperoxy radicals are present in similar amounts. Gas-phase product yields from the RO(2) + HO(2) pathway are identified as 0.75-0.78 isoprene nitrooxy hydroperoxide (INP), 0.22 methyl vinyl ketone (MVK) + formaldehyde (CH(2)O) + hydroxyl radical (OH) + nitrogen dioxide (NO(2)), and 0-0.03 methacrolein (MACR) + CH(2)O + OH + NO(2). We further examined the photochemistry of INP and identified propanone nitrate (PROPNN) and isoprene nitrooxy hydroxyepoxide (INHE) as the main products. INHE undergoes similar heterogeneous chemistry as isoprene dihydroxy epoxide (IEPOX), likely contributing to atmospheric secondary organic aerosol formation.

Quantifying sources and sinks of reactive gases in the lower atmosphere using airborne flux observations

Atmospheric composition is governed by the interplay of emissions, chemistry, deposition, and transport. Substantial questions surround each of these processes, especially in forested environments with strong biogenic emissions. Utilizing aircraft observations acquired over a forest in the southeast U.S., we calculate eddy covariance fluxes for a suite of reactive gases and apply the synergistic information derived from this analysis to quantify emission and deposition fluxes, oxidant concentrations, aerosol uptake coefficients, and other key parameters. Evaluation of results against state-of-the-science models and parameterizations provides insight into our current understanding of this system and frames future observational priorities. As a near-direct measurement of fundamental process rates, airborne fluxes offer a new tool to improve biogenic and anthropogenic emissions inventories, photochemical mechanisms, and deposition parameterizations.

Airborne Measurements of Western U.S. Wildfire Emissions: Comparison with Prescribed Burning and Air Quality Implications

Wildfires emit significant amounts of pollutants that degrade air quality. Plumes from three wildfires in the western U.S. were measured from aircraft during the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC^4RS) and the Biomass Burning Observation Project (BBOP), both in summer 2013. This study reports an extensive set of emission factors (EFs) for over 80 gases and 5 components of submicron particulate matter (PM_1) from these temperate wildfires. These include rarely, or never before, measured oxygenated volatile organic compounds and multifunctional organic nitrates. The observed EFs are compared with previous measurements of temperate wildfires, boreal forest fires, and temperate prescribed fires. The wildfires emitted high amounts of PM_1 (with organic aerosol (OA) dominating the mass) with an average EF that is more than 2 times the EFs for prescribed fires. The measured EFs were used to estimate the annual wildfire emissions of carbon monoxide, nitrogen oxides, total nonmethane organic compounds, and PM_1 from 11 western U.S. states. The estimated gas emissions are generally comparable with the 2011 National Emissions Inventory (NEI). However, our PM_1 emission estimate (1530 ± 570 Gg yr^(−1)) is over 3 times that of the NEI PM_(2.5) estimate and is also higher than the PM_(2.5) emitted from all other sources in these states in the NEI. This study indicates that the source of OA from biomass burning in the western states is significantly underestimated. In addition, our results indicate that prescribed burning may be an effective method to reduce fine particle emissions.

Isoprene Peroxy Radical Dynamics

Approximately 500 Tg of 2-methyl-1,3-butadiene (isoprene) is emitted by deciduous trees each year. Isoprene oxidation in the atmosphere is initiated primarily by addition of hydroxyl radicals (OH) to C4 or C1 in a ratio 0.57 ± 0.03 (1σ) to produce two sets of distinct allylic radicals. Oxygen (O2) adds to these allylic radicals either δ (Z or E depending on whether the allylic radical is cis or trans) or β to the OH group forming six distinct peroxy radical isomers. Due to the enhanced stability of the allylic radical, however, these peroxy radicals lose O2 in competition with bimolecular reactions. In addition, the Z-δ hydroxy peroxy radical isomers undergo unimolecular 1,6 H-shift isomerization. Here, we use isomer-resolved measurements of the reaction products of the peroxy radicals to diagnose this complex chemistry. We find that the ratio of δ to β hydroxy peroxy radicals depends on their bimolecular lifetime (τbimolecular). At τbimolecular ≈ 0.1 s, a transition occurs from a kinetically to a largely thermodynamically controlled distribution at 297 K. Thus, in nature, where τbimolecular > 10 s, the distribution of isoprene hydroxy peroxy radicals will be controlled primarily by the difference in the relative stability of the peroxy radical isomers. In this regime, β hydroxy peroxy radical isomers comprise ∼95% of the radical pool, a much higher fraction than in the nascent (kinetic) distribution. Intramolecular 1,6 H-shift isomerization of the Z-δ hydroxy peroxy radical isomers produced from OH addition to C4 is estimated to be ∼4 s-1 at 297 K. While the Z-δ isomer is initially produced in low yield, it is continually reformed via decomposition of the β hydroxy peroxy radicals. As a result, unimolecular chemistry from this isomer contributes about half of the atmospheric fate of the entire pool of peroxy radicals formed via addition of OH at C4 for typical atmospheric conditions (τbimolecular = 100 s and T = 25 C). In contrast, unimolecular chemistry following OH addition at C1 is slower and less important.

Gas-Phase Reactions of Isoprene and Its Major Oxidation Products

Isoprene carries approximately half of the flux of non-methane volatile organic carbon emitted to the atmosphere by the biosphere. Accurate representation of its oxidation rate and products is essential for quantifying its influence on the abundance of the hydroxyl radical (OH), nitrogen oxide free radicals (NO x), ozone (O3), and, via the formation of highly oxygenated compounds, aerosol. We present a review of recent laboratory and theoretical studies of the oxidation pathways of isoprene initiated by addition of OH, O3, the nitrate radical (NO3), and the chlorine atom. From this review, a recommendation for a nearly complete gas-phase oxidation mechanism of isoprene and its major products is developed. The mechanism is compiled with the aims of providing an accurate representation of the flow of carbon while allowing quantification of the impact of isoprene emissions on HO x and NO x free radical concentrations and of the yields of products known to be involved in condensed-phase processes. Finally, a simplified (reduced) mechanism is developed for use in chemical transport models that retains the essential chemistry required to accurately simulate isoprene oxidation under conditions where it occurs in the atmosphere-above forested regions remote from large NO x emissions.

Kinetics and Product Yields of the OH Initiated Oxidation of Hydroxymethyl Hydroperoxide

Hydroxymethyl hydroperoxide (HMHP), formed in the reaction of the C1 Criegee intermediate with water, is among the most abundant organic peroxides in the atmosphere. Although reaction with OH is thought to represent one of the most important atmospheric removal processes for HMHP, this reaction has been largely unstudied in the laboratory. Here, we present measurements of the kinetics and products formed in the reaction of HMHP with OH. HMHP was oxidized by OH in an environmental chamber; the decay of the hydroperoxide and the formation of formic acid and formaldehyde were monitored over time using CF3O- chemical ionization mass spectrometry (CIMS) and laser-induced fluorescence (LIF). The loss of HMHP by reaction with OH is measured relative to the loss of 1,2-butanediol [ k1,2-butanediol+OH = (27.0 ± 5.6) × 10-12 cm3 molecule-1s-1]. We find that HMHP reacts with OH at 295 K with a rate coefficient of (7.1 ± 1.5) × 10-12 cm3 molecule-1s-1, with the formic acid to formaldehyde yield in a ratio of 0.88 ± 0.21 and independent of NO concentration (3 × 1010 - 1.5 × 1013 molecules cm-3). We suggest that, exclusively, abstraction of the methyl hydrogen of HMHP results in formic acid, while abstraction of the hydroperoxy hydrogen results in formaldehyde. We further evaluate the relative importance of HMHP sinks and use global simulations from GEOS-Chem to estimate that HMHP oxidation by OH contributes 1.7 Tg yr-1 (1-3%) of global annual formic acid production.