Alexander Tadeu Sverzut

Effects of type I collagen coating on titanium osseointegration: histomorphometric, cellular and molecular analyses.

The investigation of titanium (Ti) surface modifications aiming to increase implant osseointegration is one of the most active research areas in dental implantology. This study was carried out to evaluate the benefits of coating Ti with type I collagen on the osseointegration of dental implants. Acid etched Ti implants (AETi), either untreated or coated with type I collagen (ColTi), were placed in dog mandibles for three and eight weeks for histomorphometric, cellular and molecular evaluations of bone tissue response. While the histological aspects were essentially the same with both implants being surrounded by lamellar bone trabeculae, histomorphometric analysis showed more abundant bone formation in ColTi, mainly at three weeks. Cellular evaluation showed that cells harvested from bone fragments in close contact with ColTi display lower proliferative capacity and higher alkaline phosphatase activity, phenotypic features associated with more differentiated osteoblasts. Confirming these findings, molecular analyses showed that ColTi implants up-regulates the expression of a panel of genes well known as osteoblast markers. Our results present a set of evidences that coating AETi with collagen fastens the osseointegration by stimulating bone formation at the cellular and molecular levels, making this combination of morphological and biochemical modification a promising approach to treat Ti surfaces.

The Influence of Tobacco on Early Dental Implant Failure

PURPOSE The purpose of this study was to assess tobacco use as a risk factor for early implant failure. MATERIALS AND METHODS To address the research aim, a retrospective study design was used, and a study sample was derived from among patients who had 1 or more implants inserted between July 1996 and July 2004. The main predictor variable was the frequency of tobacco use. The major outcome variable was early implant failure. Appropriate descriptive, bivariate, and multivariate statistics were computed. RESULTS The study sample was composed of 650 patients who had 1,628 implants inserted and were selected for analysis. The early implant loss rates found in the nonsmoking group and the smoking group were 3.32% and 2.81%, respectively. Univariate and bivariate analyses showed no statistical significance for early implant losses associated with the frequency of tobacco use. CONCLUSIONS The results of this study suggest that tobacco use alone cannot be considered as a factor for risk related to early implant failures. Prospective studies are needed to assess the risk of early implant failure in conjunction with smoking.

Removal of a maxillary third molar accidentally displaced into the infratemporal fossa via intraoral approach under local anesthesia: report of a case.

The surgical removal of impacted maxillary third molars is a procedure routinely carried out by dentists and oral surgeons, and it is usually associated with low rates of complications and morbidity. 1,2 These complications frequently include fracture of the tuberosity, tooth root fracture, perforation of the maxillary sinus, prolapse of the buccal fat pad, and displacement of the roots or tooth into the maxillary sinus, all of which may be easily managed. 2,3 Although the displacement of an entire tooth into the infratemporal fossa was once considered a rare complication, 3 it has been reported more frequently in the literature in the last 4 decades. 1,2,4-11 This case report describes the location and surgical removal of a left maxillary third molar displaced into the infratemporal fossa during an unsuccessful surgical removal by the patients dental clinician. The diagnostic and treatment problems and the causes of this complication are also discussed.

Accidental Displacement of Impacted Maxillary Third Molar: A Case Report

An unusual case of an impacted right maxillary third molar that was accidentally displaced into the maxillary sinus during exodontia and was surgically retrieved almost 2 years later is described. The tooth was removed under general anesthesia, after maxillary sinus exposure through Caldwell-Luc approach. Postoperative recovery was uneventful. Six months after the retrieval surgery, the maxillary sinus was completely healed and the patient did not present any complaint.

Frey's syndrome after condylar fracture: case report

Freys syndrome is the occurrence of hyperesthesia, flushing and warmth or sweating over the distribution of the auriculotemporal nerve and/or greater auricular nerve while eating foods that produce a strong salivary stimulus. Freys syndrome is also known as auriculotemporal syndrome and gustatory sweating. We present a case of Freys syndrome after a condylar fracture and its treatment by internal rigid fixation. A review of the literature is provided along with mention of a simple test (Minors test) that can help in the diagnosis of this syndrome.

Bone repair in mandibular body osteotomy after using 2.0 miniplate system – histological and histometric analysis in dogs

The objective of this study was to evaluate the bone repair along a mandibular body osteotomy after using a 2.0 miniplate system. Nine adult mongrel dogs were subjected to unilateral continuous defect through an osteotomy between the mandibular 3rd and 4th premolars. Two four‐hole miniplates were placed in accordance with the Arbeitgeimeinschaft für Osteosynthesefragen Manual. Miniplates adapted to the alveolar processes were fixed monocortically with 6.0‐mm‐length titanium alloy self‐tapping screws, whereas miniplates placed near the mandible bases were fixed bicortically. At 2, 6 and 12 weeks, three dogs were sacrificed per period, and the osteotomy sites were removed, divided into three thirds (Tension Third, TT; Intermediary Third, IT; Compression Third, CT) and prepared for conventional and polarized light microscopy. At 6 weeks, while the CT repaired faster and showed bone union by woven bone formation, the TT and IT exhibited a ligament‐like fibrous connective tissue inserted in, and connecting, newly formed woven bone overlying the parent lamellar bone edges. At 12 weeks, bone repair took place at all thirds. Histometrically, proportions of newly formed bone did not alter at TT, IT and CT, whereas significantly enhanced bone formation was observed for the 12‐week group, irrespective of the third. The results demonstrated that although the method used to stabilize the mandibular osteotomy allowed bone repair to occur, differences in the dynamics of bone healing may take place along the osteotomy site, depending on the action of tension and compression forces generated by masticatory muscles.

Rehabilitation of severely resorbed edentulous mandible using the modified visor osteotomy technique

The prosthetic rehabilitation of an atrophic mandible is usually unsatisfactory due to the lack of support tissues, mainly bone and keratinized mucosa for treatment with osseointegrated implants or even conventional prosthesis. The prosthetic instability leads to social and functional limitations and chronic physical trauma decreasing the patients quality of life. A 53-year-old female patient sought care at our surgical service complaining of impairment of her masticatory function associated with the instability of the lower total prosthetic denture. The clinical and complementary exams revealed edentulism in both arches, while the mandibular arch presented severe reabsorption resulting in denture instability and chronic trauma to the oral mucosa. The proposed treatment plan consisted in the mandibular rehabilitation with osseointegrated implants and fixed Brånemarks protocol prosthesis after mandibular reconstruction applying the modified visor osteotomy technique. The proposed technique offered predictable results for reconstruction of the severely resorbed edentulous mandible and posterior rehabilitation with osseointegrated implants.

Bone tissue response to plasma-nitrided titanium implant surfaces

A current goal of dental implant research is the development of titanium (Ti) surfaces to improve osseointegration. Plasma nitriding treatments generate surfaces that favor osteoblast differentiation, a key event to the process of osteogenesis. Based on this, it is possible to hypothesize that plasma-nitrided Ti implants may positively impact osseointegration. Objective The aim of this study was to evaluate the in vivo bone response to Ti surfaces modified by plasma-nitriding treatments. Material and Methods Surface treatments consisted of 20% N2 and 80% H2, 450°C and 1.5 mbar during 1 h for planar and 3 h for hollow cathode. Untreated surface was used as control. Ten implants of each surface were placed into rabbit tibiae and 6 weeks post-implantation they were harvested for histological and histomorphometric analyses. Results Bone formation was observed in contact with all implants without statistically significant differences among the evaluated surfaces in terms of bone-to-implant contact, bone area between threads, and bone area within the mirror area. Conclusion Our results indicate that plasma nitriding treatments generate Ti implants that induce similar bone response to the untreated ones. Thus, as these treatments improve the physico-chemical properties of Ti without affecting its biocompatibility, they could be combined with modifications that favor bone formation in order to develop new implant surfaces.

Mandibular bisphosphonate-related osteonecrosis after dental implant rehabilitation: a case report.

It has been a matter of debate as to whether dental implant therapies are suitable for patients subjected to long-term use of bisphosphonates (BPs). This report presents a case of a 76-year-old woman who developed BPs-related osteonecrosis of the jaw (BRONJ) in the left hemimandible after dental implant exposure. The implants and the necrotic crestal bone were removed, and postoperatively, a delay in tissue healing with bone exposure was noticed. The histologic analysis of the block biopsies revealed a lamellar bone tissue exhibiting necrotic areas and bacterial colonies associated with the bone outer surface. The bone-implant interface showed viable lamellar bone with enlarged vascular spaces in the areas between the implant threads. The possible mechanisms for the loss of implants in BRONJ patients are discussed, and the potential protocols for dental implant rehabilitation for patients under BP therapies are presented.

Clinical, radiographic, and histological analyses of calcium phosphate cement as filling material in maxillary sinus lift surgery

BACKGROUND The installation of dental implants in the posterior maxilla is often faced with resorbed alveolar processes, resulting from a combination of pneumatization of the maxillary sinus, the effects of periodontal disease, and physiological bone resorption. The sinus lift surgery has been practiced since 1980 with the aim to increase bone height in this region for an implant supported prosthetic rehabilitation, and various filling materials have been used for such. OBJECTIVES This study aimed to clinically, radiographically, and histologically evaluate a preparation of calcium phosphate cement (Bone Source(®), BS) used as filling material in maxillary sinus elevation surgery. METHODS Ten patients were operated requiring maxillary sinus graft for future placement of osseointegrated implants. After a period ranging from 9 to 16 months, a clinical evaluation and biopsy of the grafted area in the region adjacent to the axis of the implant to be inserted were performed. RESULTS Clinically and radiographically, no evidence of resorption/substitution of BS was noticed. Although no patients have had postoperative complications and the material presented fully biocompatible characteristics with woven bone in intimate contact with BS, it was not possible to place any implants due to minimal bone formation and friability of the material. CONCLUSION It was concluded that despite the osteoconductive capacity of BS, this conventional calcium phosphate preparation does not support sufficient amount of new bone formation that could allow its use as filling material for maxillary sinus floor lift and subsequent dental implant placement.