Alexander W. Peterson

Surface plasmon resonance imaging of cells and surface-associated fibronectin.

BackgroundA critical challenge in cell biology is quantifying the interactions of cells with their extracellular matrix (ECM) environment and the active remodeling by cells of their ECM. Fluorescence microscopy is a commonly employed technique for examining cell-matrix interactions. A label-free imaging method would provide an alternative that would eliminate the requirement of transfected cells and modified biological molecules, and if collected nondestructively, would allow long term observation and analysis of live cells.ResultsUsing surface plasmon resonance imaging (SPRI), the deposition of protein by vascular smooth muscle cells (vSMC) cultured on fibronectin was quantified as a function of cell density and distance from the cell periphery. We observed that as much as 120 ng/cm2 of protein was deposited by cells in 24 h.ConclusionSPRI is a real-time, low-light-level, label-free imaging technique that allows the simultaneous observation and quantification of protein layers and cellular features. This technique is compatible with live cells such that it is possible to monitor cellular modifications to the extracellular matrix in real-time.

Using surface plasmon resonance imaging to probe dynamic interactions between cells and extracellular matrix

Spatially resolved details of the interactions of cells with a fibronectin modified surface were examined using surface plasmon resonance imaging (SPRI). SPRI is a label‐free technique that is based on the spatial measurement of interfacial refractive index. SPRI is sensitive to short range interactions between cells and their substratum. The high contrast in SPR signal between cell edges and substratum facilitates identification of cell edges and segmentation of cell areas. With this novel technique, we demonstrate visualization of cell‐substratum interactions, and how cell‐substratum interactions change over time as cells spread, migrate, and undergo membrane ruffling. Published 2010 Wiley‐Liss, Inc.

High resolution surface plasmon resonance imaging for single cells

BackgroundSurface plasmon resonance imaging (SPRI) is a label-free technique that can image refractive index changes at an interface. We have previously used SPRI to study the dynamics of cell-substratum interactions. However, characterization of spatial resolution in 3 dimensions is necessary to quantitatively interpret SPR images. Spatial resolution is complicated by the asymmetric propagation length of surface plasmons in the x and y dimensions leading to image degradation in one direction. Inferring the distance of intracellular organelles and other subcellular features from the interface by SPRI is complicated by uncertainties regarding the detection of the evanescent wave decay into cells. This study provides an experimental basis for characterizing the resolution of an SPR imaging system in the lateral and distal dimensions and demonstrates a novel approach for resolving sub-micrometer cellular structures by SPRI. The SPRI resolution here is distinct in its ability to visualize subcellular structures that are in proximity to a surface, which is comparable with that of total internal reflection fluorescence (TIRF) microscopy but has the advantage of no fluorescent labels.ResultsAn SPR imaging system was designed that uses a high numerical aperture objective lens to image cells and a digital light projector to pattern the angle of the incident excitation on the sample. Cellular components such as focal adhesions, nucleus, and cellular secretions are visualized. The point spread function of polymeric nanoparticle beads indicates near-diffraction limited spatial resolution. To characterize the z-axis response, we used micrometer scale polymeric beads with a refractive index similar to cells as reference materials to determine the detection limit of the SPR field as a function of distance from the substrate. Multi-wavelength measurements of these microspheres show that it is possible to tailor the effective depth of penetration of the evanescent wave into the cellular environment.ConclusionWe describe how the use of patterned incident light provides SPRI at high spatial resolution, and we characterize a finite limit of detection for penetration depth. We demonstrate the application of a novel technique that allows unprecedented subcellular detail for SPRI, and enables a quantitative interpretation of SPRI for subcellular imaging.

Cell spreading and proliferation in response to the composition and mechanics of engineered fibrillar extracellular matrices

The extracellular matrix (ECM) consists of a complex mixture of biochemical and physical stimuli that together regulate cell behavior. In this study, we engineer a model ECM consisting of fibrillar Type‐1 collagen plus fibronectin that allows systematic examination of the effects of matrix composition and mechanics on cells. On this combined protein matrix, cells exhibit intermediate degrees of spreading and proliferation compared to their responses on collagen or fibronectin alone. Adhesion to the combination matrix could be blocked by peptides containing the sequence arginine‐glycine‐aspartic acid (RGD) and by antibodies against α1 integrin, suggesting cell–matrix engagement was mediated by a combination of integrin receptors that recognize fibronectin and collagen. Regardless of integrin engagement, cells were sensitive to the mechanical properties of the combination ECM, suggesting that cells could process biochemical and mechanical cues simultaneously and independently. Biotechnol. Bioeng. 2013;110: 2731–2741.

Surface plasmon resonance microscopy: Achieving a quantitative optical response

Surface plasmon resonance (SPR) imaging allows real-time label-free imaging based on index of refraction and changes in index of refraction at an interface. Optical parameter analysis is achieved by application of the Fresnel model to SPR data typically taken by an instrument in a prism based figuration. We carry out SPR imaging on a microscope by launching light into a sample and collecting reflected light through a high numerical aperture microscope objective. The SPR microscope enables spatial resolution that approaches the diffraction limit and has a dynamic range that allows detection of subnanometer to submicrometer changes in thickness of biological material at a surface. However, unambiguous quantitative interpretation of SPR changes using the microscope system could not be achieved using the Fresnel model because of polarization dependent attenuation and optical aberration that occurs in the high numerical aperture objective. To overcome this problem, we demonstrate a model to correct for polarization diattenuation and optical aberrations in the SPR data and develop a procedure to calibrate reflectivity to index of refraction values. The calibration and correction strategy for quantitative analysis was validated by comparing the known indices of refraction of bulk materials with corrected SPR data interpreted with the Fresnel model. Subsequently, we applied our SPR microscopy method to evaluate the index of refraction for a series of polymer microspheres in aqueous media and validated the quality of the measurement with quantitative phase microscopy.