Anne L. Plant

Supported phospholipid/alkanethiol biomimetic membranes: insulating properties

A novel model lipid bilayer membrane is prepared by the addition of phospholipid vesicles to alkanethiol monolayers on gold. This supported hybrid bilayer membrane is rugged, easily and reproducibly prepared in the absence of organic solvent, and is stable for very long periods of time. We have characterized the insulating characteristics of this membrane by examining the rate of electron transfer and by impedance spectroscopy. Supported hybrid bilayers formed from phospholipids and alkanethiols are pinhole-free and demonstrate measured values of conductivity and resistivity which are within an order of magnitude of that reported for black lipid membranes. Capacitance values suggest a dielectric constant of 2.7 for phospholipid membranes in the absence of organic solvent. The protein toxin, melittin, destroys the insulating capability of the phospholipid layer without significantly altering the bilayer structure. This model membrane will allow the assessment of the effect of lipid membrane perturbants on the insulating properties of natural lipid membranes.

Hybrid bilayer membranes in air and water: infrared spectroscopy and neutron reflectivity studies.

In this report we describe the fabrication and characterization of a phospholipid/alkanethiol hybrid bilayer membrane in air. The bilayer is formed by the interaction of phospholipid with the hydrophobic surface of a self-assembled alkanethiol monolayer on gold. We have characterized the resulting hybrid bilayer membrane in air using atomic force microscopy, spectroscopic ellipsometry, and reflection-absorption infrared spectroscopy. These analyses indicate that the phospholipid added is one monolayer thick, is continuous, and exhibits molecular order which is similar to that observed for phospholipid/phospholipid model membranes. The hybrid bilayer prepared in air has also been re-introduced to water and characterized using neutron reflectivity and impedance spectroscopy. Impedance data indicate that when moved from air to water, hybrid bilayers exhibit a dielectric constant and thickness that is essentially equivalent to hybrid bilayers prepared in situ by adding phospholipid vesicles to alkanethiol monolayers in water. Neutron scattering from these samples was collected out to a wave vector transfer of 0.25 A(-1), and provided a sensitivity to changes in total layer thickness on the order of 1-2 A. The data confirm that the acyl chain region of the phospholipid layer is consistent with that observed for phospholipid-phospholipid bilayers, but suggest greater hydration of the phospholipid headgroups of HBMs than has been reported in studies of lipid multilayers.

Biotechnological applications of surface plasmon resonance

The surface plasmon resonance technique allows direct, real-time kinetic measurements of the interaction of unlabelled biological molecules at surfaces. After a brief discussion of the principles of surface plasmon resonance, we review its application to the nonspecific adsorption of protein, the formation of phospholipid bilayers, membrane-protein interactions and DNA hybridization. The morphological studies of the biological surfaces using surface plasmon resonance microscopy and the potential of the surface plasmon resonance to measure the dynamics of surface layer heterogeneity are discussed.

Surface plasmon resonance imaging of cells and surface-associated fibronectin.

BackgroundA critical challenge in cell biology is quantifying the interactions of cells with their extracellular matrix (ECM) environment and the active remodeling by cells of their ECM. Fluorescence microscopy is a commonly employed technique for examining cell-matrix interactions. A label-free imaging method would provide an alternative that would eliminate the requirement of transfected cells and modified biological molecules, and if collected nondestructively, would allow long term observation and analysis of live cells.ResultsUsing surface plasmon resonance imaging (SPRI), the deposition of protein by vascular smooth muscle cells (vSMC) cultured on fibronectin was quantified as a function of cell density and distance from the cell periphery. We observed that as much as 120 ng/cm2 of protein was deposited by cells in 24 h.ConclusionSPRI is a real-time, low-light-level, label-free imaging technique that allows the simultaneous observation and quantification of protein layers and cellular features. This technique is compatible with live cells such that it is possible to monitor cellular modifications to the extracellular matrix in real-time.

Self assembly driven by hydrophobic interactions at alkanethiol monolayers: mechanism of formation of hybrid bilayer membranes

The mechanism for the formation of biomimetic model cell membranes consisting of bilayers composed of alkanethiols and phospholipids was probed with a kinetic study using surface plasmon resonance. The kinetics of formation of a monolayer of phospholipid from vesicles in solution onto a hydrophobic alkanethiol monolayer is described by a model that takes into account the lipid concentration, diffusion, and a surface reorganization rate constant. Monomer phospholipid apparently does not play a direct role in determining the kinetics of bilayer formation. Expressions for the limiting cases of this model describe the behavior of two distinct vesicle concentration conditions. At high concentrations of lipid vesicles the formation of the bilayer appears to be limited by the diffusion of vesicles to the surface; at lower concentrations of vesicles, the rate-limiting step is apparently the surface reorganization of lipid. This kinetic model can also be used to describe the formation of a biomimetic bilayer from an alkanethiol monolayer and cell membranes.

ROCK controls matrix synthesis in vascular smooth muscle cells: Coupling vasoconstriction to vascular remodeling

Tenascin-C (TN-C) is an extracellular matrix (ECM) protein expressed within remodeling systemic and pulmonary arteries (PAs), where it supports vascular smooth muscle cell (SMC) proliferation. Previously, we showed that A10 SMCs cultivated on native type I collagen possess a spindle-shaped morphology and do not express TN-C, whereas those on denatured collagen possess a well-defined F-actin stress fiber network, a spread morphology, and they do express TN-C. To determine whether changes in cytoskeletal architecture control TN-C, SMCs on denatured collagen were treated with cytochalasin D, which decreased SMC spreading and activation of extracellular signal-regulated kinase 1/2 (ERK1/2), signaling effectors required for TN-C transcription. Next, to determine whether cell shape, dictated by the F-actin cytoskeleton, regulates TN-C, different geometries of SMCs (ranging from spread to round) were engineered on denatured collagen: as SMCs progressively rounded, ERK1/2 activity and TN-C transcription declined. Because RhoA and Rho kinase (ROCK) regulate cell morphology by controlling cytoskeletal architecture, we reasoned that these factors might also regulate TN-C. Indeed, SMCs on denatured collagen possessed higher levels of RhoA activity than those on native collagen, and blocking RhoA or ROCK activities attenuated SMC spreading, ERK1/2 activity, and TN-C expression in SMCs on denatured collagen. Thus, ROCK controls the configuration of the F-actin cytoskeleton and SMC shape in a manner that is permissive for ERK1/2-dependent production of TN-C. Finally, we showed that inhibition of ROCK activity suppresses SMC TN-C expression and disease progression in hypertensive rat PAs. Thus, in addition to its role in regulating vasoconstriction, ROCK also controls matrix production.

Cell response to matrix mechanics: Focus on collagen

Many model systems and measurement tools have been engineered for observing and quantifying the effect of mechanics on cellular response. These have contributed greatly to our current knowledge of the molecular events by which mechanical cues affect cell biology. Cell responses to the mechanical properties of type 1 collagen gels are discussed, followed by a description of a model system of very thin, mechanically tunable collagen films that evoke similar responses from cells as do gel systems, but have additional advantages. Cell responses to thin films of collagen suggest that at least some of the mechanical cues that cells can respond to in their environment occur at the sub-micron scale. Mechanical properties of thin films of collagen can be tuned without altering integrin engagement, and in some cases without altering topology, making them useful in addressing questions regarding the roles of specific integrins in transducing or mitigating responses to mechanical cues. The temporal response of cells to differences in ECM may provide insight into mechanisms of signal transduction.

A noninvasive thin film sensor for monitoring oxygen tension during in vitro cell culture.

Oxygen tension in mammalian cell culture can profoundly affect cellular differentiation, viability, and proliferation. However, precise measurement of dissolved oxygen in real time remains difficult. We report a new noninvasive sensor that can accurately measure oxygen concentration during cell culture while being compatible with live-cell imaging techniques such as fluorescence and phase contrast microscopy. The sensor is prepared by integrating the porphyrin dye, Pt(II) meso-tetrakis(pentafluorophenyl)porphine (PtTFPP) into polydimethylsiloxane (PDMS) thin films. Response of the sensor in the presence of oxygen can be characterized by the linear Stern-Volmer relationship with high sensitivity (K(SV) = 584 +/- 71 atm(-1)). A multilayer sensor design, created by sandwiching the PtTFPP-PDMS with a layer of Teflon AF followed by a second PDMS layer, effectively mitigates against dye cytotoxicity while providing a substrate for cell attachment. Using this sensor, changes in oxygen tension could be monitored in real-time as attached cells proliferated. The oxygen tension was found to decrease due to oxygen consumption by the cells, and the data could be analyzed using Ficks law to obtain the per-cell oxygen consumption rate. This sensor is likely to enable new studies on the effects of dissolved oxygen on cellular behavior.

Generic liposome reagent for immunoassays.

We have derivatized liposomes with antibodies by using avidin to crosslink biotinylated phospholipid molecules in the liposome membranes with biotinylated antibody molecules. A comparison of the biotin binding activity of avidin in solution and avidin associated with liposomes shows that avidin bound to biotinylated phospholipid in liposome membranes retains full binding activity for additional biotin molecules. Changes in the fluorescence spectrum of avidin have been used to characterize the binding capacity of avidin for biotin in solution, and change in intensity of light scattered due to aggregation of liposomes was used to measure the biotin binding activity of avidin associated with liposomes. Relative amounts of the biotinylated phospholipid, avidin, and biotinylated antibody have been optimized to produce stable liposomes which are derivatized with up to 1.7 nmol of antibody/mumol of lipid. These derivatized liposomes are highly reactive to immunospecific aggregation in the presence of multivalent antigen. A linear increase in light scattering was recorded between 1 and 10 pmol of antigen. This work shows that liposomes containing biotinylated phospholipid can be a successful generic reagent for immunoassays.

Comparison of Segmentation Algorithms For Fluorescence Microscopy Images of Cells

The analysis of fluorescence microscopy of cells often requires the determination of cell edges. This is typically done using segmentation techniques that separate the cell objects in an image from the surrounding background. This study compares segmentation results from nine different segmentation techniques applied to two different cell lines and five different sets of imaging conditions. Significant variability in the results of segmentation was observed that was due solely to differences in imaging conditions or applications of different algorithms. We quantified and compared the results with a novel bivariate similarity index metric that evaluates the degree of underestimating or overestimating a cell object. The results show that commonly used threshold‐based segmentation techniques are less accurate than k‐means clustering with multiple clusters. Segmentation accuracy varies with imaging conditions that determine the sharpness of cell edges and with geometric features of a cell. Based on this observation, we propose a method that quantifies cell edge character to provide an estimate of how accurately an algorithm will perform. The results of this study will assist the development of criteria for evaluating interlaboratory comparability. Published 2011 Wiley‐Liss, Inc.