Alexandru S. Biris

Cobalt nanoparticles coated with graphitic shells as localized radio frequency absorbers for cancer therapy

Graphitic carbon-coated ferromagnetic cobalt nanoparticles (C-Co-NPs) with diameters of around 7xa0nm and cubic crystalline structures were synthesized by catalytic chemical vapor deposition. X-ray diffraction and x-ray photoelectron spectroscopy analysis indicated that the cobalt nanoparticles inside the carbon shells were preserved in the metallic state. Fluorescence microscopy images and Raman spectroscopy revealed effective penetrations of the C-Co-NPs through the cellular plasma membrane of the cultured HeLa cells, both inside the cytoplasm and in the nucleus. Low radio frequency (RF) radiation of 350 kHz induced localized heat into the metallic nanoparticles, which triggered the killing of the cells, a process that was found to be dependent on the RF application time and nanoparticle concentration. When compared to carbon nanostructures such as single-wall carbon nanotubes, these coated magnetic cobalt nanoparticles demonstrated higher specificity for RF absorption and heating. DNA gel electrophoresis assays of the HeLa cells after the RF treatment showed a strong broadening of the DNA fragmentation spectrum, which further proved the intense localized thermally induced damages such as DNA and nucleus membrane disintegration, under RF exposure in the presence of C-Co-NPs. The data presented in this report indicate a great potential of this new process for in vivo tumor thermal ablation, bacteria killing, and various other biomedical applications.

Graphene supports in vitro proliferation and osteogenic differentiation of goat adult mesenchymal stem cells: potential for bone tissue engineering

Current treatments for bone loss injuries involve autologous and allogenic bone grafts, metal alloys and ceramics. Although these therapies have proved useful, they suffer from inherent challenges, and hence, an adequate bone replacement therapy has not yet been found. We hypothesize that graphene may be a useful nanoscaffold for mesenchymal stem cells and will promote proliferation and differentiation into bone progenitor cells. In this study, we evaluate graphene, a biocompatible inert nanomaterial, for its effect on in vitro growth and differentiation of goat adult mesenchymal stem cells. Cell proliferation and differentiation are compared between polystyrene‐coated tissue culture plates and graphene‐coated plates. Graphitic materials are cytocompatible and support cell adhesion and proliferation. Importantly, cells seeded on to oxidized graphene films undergo osteogenic differentiation in fetal bovine serum‐containing medium without the addition of any glucocorticoid or specific growth factors. These findings support graphenes potential to act as an osteoinducer and a vehicle to deliver mesenchymal stem cells, and suggest that the combination of graphene and goat mesenchymal stem cells provides a promising construct for bone tissue engineering. Copyright

Single-walled carbon nanotubes as specific targeting and Raman spectroscopic agents for detection and discrimination of single human breast cancer cells

Abstract. Raman active nano-complex agents based on single-walled carbon nanotubes (SWCNTs) are prepared and used for the swift and specific detection of breast cancer cells. SWCNTs are functionalized to bond covalently with the anti-epithelial cell adhesion molecule (anti-EpCAM) antibody, which is specific to the highly expressed EpCAM antigen on the surface of breast cancer cells (MCF-7), but not on normal cells. The Raman nano-complexes demonstrate excellent ability to detect in vitro single breast cancer cells (MCF-7) and discriminate between them and normal fibroblast cells during the first 30 min of the targeting process. Raman linearity scanning is collected from a monolayer cell mixture, including both cancer cells and normal cells incubated with anti-EpCAM-SWCNTs, using a 633-nm laser excitation. The results shows that the Raman signal collected from targeted MCF-7 cells is extremely high, whereas there is little signal from the normal cells.

Tailored polymer?metal fractal nanocomposites: an approach to highly active surface enhanced Raman scattering substrates

An important design approach for sensitive and robust surface enhanced Raman scattering (SERS) substrates is the use of metal nanoparticle aggregates with nanometer tailored interstitial distances between their surfaces, in order to confine the electromagnetic energy. The nanostructural instability of the aggregates to agglomeration due to their strong van der Waals force poses a challenge for the preparation of large-scale, reliable SERS substrates. We present a novel route for preparing stable and highly active SERS substrates using polymer-metal fractal nanocomposites. This methodology is based on the unique morphology of fractal nanocomposite structures formed just below the percolation threshold that consists of extremely narrow (approximately 0.8 nm) interstitial polymer junctions between the Ag nanoparticle aggregates along with the appropriate nanoscale (<100 nm) surface roughness. Such nanomorphology allows the formation of well-defined and large numbers of hot spots where the localization of electromagnetic energy can result in very large enhancement of the Raman signal. We applied a simple plasma etching process to remove the polymer structures that allowed the formation of Ag structures with very uniform and controllable inter-particle gaps that were proved to provide significant SERS enhancement of typical biological systems such as double-stranded deoxyribonucleic acid (dsDNA). These advanced nanocomposite films could be used for the development of large-scale spectroscopy-based sensors for direct detection and analysis of various biological and chemical samples.

Tuning the work function of polyaniline via camphorsulfonic acid: an X-ray photoelectron spectroscopy investigation

In this work, we present the first demonstration of tuning the work function of polyaniline by controlling the concentration level of camphorsulfonic acid as a protonic acid dopant and m-cresol as a solvent. Optical, thermal, structural, and electronic properties, along with surface topography and elemental analysis of protonated polyaniline, were studied in detail to investigate the effect of camphorsulfonic acid on the work function of polyaniline. The results showed that an increase in camphorsulfonic acid content induces a gradual transformation in the polyaniline structure from an emeraldine base to an emeraldine salt phase, which is associated with an increase in electrical conductivity and an improvement in crystallinity. X-ray photoelectron spectroscopy was used to evaluate the work function and to determine the elemental composition of the surface and several atomic layers beneath the surface. The results showed that increasing the camphorsulfonic acid content from quarter protonated to fully protonated leads to an increase in the work function of polyaniline from 4.42 ± 0.14 eV to 4.78 ± 0.13 eV.

Calcium-channel blocking and nanoparticles-based drug delivery for treatment of drug-resistant human cancers

BACKGROUNDnCancer cell chemoresistance is one of the major limitations to successful cancer treatment and one of the factors that is responsible for the possible recurrence of the disease. Here, we aimed to combine a calcium-channel blocker, verapamil, with an alternative delivery of the anti-cancer drug, doxorubicin, using nanostructural materials. This approach could reduce the cellular resistance to chemotherapeutics agents.nnnRESULTSnThe outcome of this complex approach on cellular viability was investigated by using various assays in both a time- and concentration-dependent manner: WST-1, flow cytometry cell viability assay, fluorescence microscopy, DNA fragmentation, and TUNEL labeling of apoptotic cells.nnnCONCLUSIONnAll of these analytical assays confirmed the ability to reduce the chemoresistance of the cancer cells based on the proposed procedure.

Separation and spectroscopic/molecular weight analysis of crude and purified polyaniline(s)

Inherently conducting polymers have gained increased attention due to the many unique optoelectronic properties they exhibit. The properties of polymers vary depending on the purity, molecular weight distribution, and synthetic conditions; all of these are important for widespread use in many touted applications. These studies have been undertaken in order to separate the low molecular weight and high molecular weight fractions from the crude product. The results demonstrate an efficient separation of different molecular weights of polyaniline (PANI) by the soxhlet extraction procedure with a series of solvents (methanol, chloroform, tetrahydrofuran and benzyl alcohol). The purified products and extracts were characterized by gel permeation chromatography (GPC) to determine their molecular weight distributions. UV-visible, infrared, and nuclear magnetic resonance (NMR) spectroscopy were performed for structural analysis of the polyanilines. Low molecular weight polyanilines can promote the aggregation in polyaniline chains and increase the solubility of polyanilines.

Synthesis of carbon nanotubes from acetylene on the FeCoMgO catalytic system obtained by ball milling

Highly crystalline multi wall carbon nanotubes have been synthesized by RF-CVD from acetylene at 850°C over a Fe:Co:MgO catalyst. The catalytic system was obtained by mixing for 100 h Fe, Co and MgO powders in a ball milling device under petroleum ether environment, followed by oxidation in air at 500°C for 24 h. Most of the nanotubes had external diameters in order of dozens of nm and lengths of microns, resulting in an aspect ration of over 1000. Their external to internal diameter ratio varied between 2.5 and 3.