Enkeleda Dervishi

Cytotoxicity Effects of Graphene and Single-Wall Carbon Nanotubes in Neural Phaeochromocytoma-Derived PC12 Cells

Graphitic nanomaterials such as graphene layers (G) and single-wall carbon nanotubes (SWCNT) are potential candidates in a large number of biomedical applications. However, little is known about the effects of these nanomaterials on biological systems. Here we show that the shape of these materials is directly related to their induced cellular toxicity. Both G and SWCNT induce cytotoxic effects, and these effects are concentration- and shape-dependent. Interestingly, at low concentrations, G induced stronger metabolic activity than SWCNT, a trend that reversed at higher concentrations. Lactate dehydrogenase levels were found to be significantly higher for SWCNT as compared to the G samples. Moreover, reactive oxygen species were generated in a concentration- and time-dependent manner after exposure to G, indicating an oxidative stress mechanism. Furthermore, time-dependent caspase 3 activation after exposure to G (10 microg/mL) shows evidence of apoptosis. Altogether these studies suggest different biological activities of the graphitic nanomaterials, with the shape playing a primary role.

Carbon Nanotubes Are Able To Penetrate Plant Seed Coat and Dramatically Affect Seed Germination and Plant Growth

Carbon nanotubes (CNTs) were found to penetrate tomato seeds and affect their germination and growth rates. The germination was found to be dramatically higher for seeds that germinated on medium containing CNTs (10-40 mug/mL) compared to control. Analytical methods indicated that the CNTs are able to penetrate the thick seed coat and support water uptake inside seeds, a process which can affect seed germination and growth of tomato seedlings.

Advances in top-down and bottom-up surface nanofabrication: techniques, applications & future prospects.

This review highlights the most significant advances of the nanofabrication techniques reported over the past decade with a particular focus on the approaches tailored towards the fabrication of functional nano-devices. The review is divided into two sections: top-down and bottom-up nanofabrication. Under the classification of top-down, special attention is given to technical reports that demonstrate multi-directional patterning capabilities less than or equal to 100 nm. These include recent advances in lithographic techniques, such as optical, electron beam, soft, nanoimprint, scanning probe, and block copolymer lithography. Bottom-up nanofabrication techniques--such as, atomic layer deposition, sol-gel nanofabrication, molecular self-assembly, vapor-phase deposition and DNA-scaffolding for nanoelectronics--are also discussed. Specifically, we describe advances in the fabrication of functional nanocomposites and graphene using chemical and physical vapor deposition. Our aim is to provide a comprehensive platform for prominent nanofabrication tools and techniques in order to facilitate the development of new or hybrid nanofabrication techniques leading to novel and efficient functional nanostructured devices.

Complex genetic, photothermal, and photoacoustic analysis of nanoparticle-plant interactions

Understanding the nature of interactions between engineered nanomaterials and plants is crucial in comprehending the impact of nanotechnology on the environment and agriculture with a focus on toxicity concerns, plant disease treatment, and genetic engineering. To date, little progress has been made in studying nanoparticle-plant interactions at single nanoparticle and genetic levels. Here, we introduce an advanced platform integrating genetic, Raman, photothermal, and photoacoustic methods. Using this approach, we discovered that multiwall carbon nanotubes induce previously unknown changes in gene expression in tomato leaves and roots, particularly, up-regulation of the stress-related genes, including those induced by pathogens and the water-channel LeAqp2 gene. A nano-bubble amplified photothermal/photoacoustic imaging, spectroscopy, and burning technique demonstrated the detection of multiwall carbon nanotubes in roots, leaves, and fruits down to the single nanoparticle and cell level. Thus, our integrated platform allows the study of nanoparticles’ impact on plants with higher sensitivity and specificity, compared to existing assays.

Carbon Nanotubes Induce Growth Enhancement of Tobacco Cells

Carbon nanotubes have shown promise as regulators of seed germination and plant growth. Here, we demonstrate that multiwalled carbon nanotubes (MWCNTs) have the ability to enhance the growth of tobacco cell culture (55-64% increase over control) in a wide range of concentrations (5-500 μg/mL). Activated carbon (AC) stimulated cell growth (16% increase) only at low concentrations (5 μg/mL) while dramatically inhibited the cellular growth at higher concentrations (100-500 μg/mL). We found a correlation between the activation of cells growth exposed to MWCNTs and the upregulation of genes involved in cell division/cell wall formation and water transport. The expression of the tobacco aquaporin (NtPIP1) gene, as well as production of the NtPIP1 protein, significantly increased in cells exposed to MWCNTs compared to control cells or those exposed to AC. The expression of marker genes for cell division (CycB) and cell wall extension (NtLRX1) was also up-regulated in cells exposed to MWCNTs compared to control cells or those exposed to activated carbon only.

Carbon Nanotubes as Plant Growth Regulators: Effects on Tomato Growth, Reproductive System, and Soil Microbial Community

Multi-walled carbon nanotubes (CNTs) can affect plant phenotype and the composition of soil microbiota. Tomato plants grown in soil supplemented with CNTs produce two times more flowers and fruit compared to plants grown in control soil. The effect of carbon nanotubes on microbial community of CNT-treated soil is determined by denaturing gradient gel electrophoresis and pyrosequencing analysis. Phylogenetic analysis indicates that Proteobacteria and Bacteroidetes are the most dominant groups in the microbial community of soil. The relative abundances of Bacteroidetes and Firmicutes are found to increase, whereas Proteobacteria and Verrucomicorbia decrease with increasing concentration of CNTs. The results of comparing diversity indices and species level phylotypes (OTUs) between samples showed that there is not a significant affect on bacterial diversity.

Light-harvesting using high density p-type single wall carbon nanotube/n-type silicon heterojunctions.

Photovoltaic conversion was achieved from high-density p-n heterojunctions between single-wall carbon nanotubes (SWNTs) and n-type crystalline silicon produced with a simple airbrushing technique. The semitransparent SWNT network coating on n-type silicon substrate forms p-n heterojunctions and exhibits rectifying behavior. Under illumination the numerous heterojunctions formed between substrate generate electron-hole pairs, which are then split and transported through SWNTs (holes) and n-Si (electrons), respectively. The nanotubes serve as both photogeneration sites and a charge carriers collecting and transport layer. Chemical modification by thionyl chloride of the SWNT coating films was found to significantly increase the conversion efficiency by more than 50% through adjusting the Fermi level and increasing the carrier concentration and mobility. Initial tests have shown a power conversion efficiency of above 4%, proving that SOCl(2) treated-SWNT/n-Si configuration is suitable for light-harvesting at relatively low cost.

Surface Chemistry of Carbon Nanotubes Impacts the Growth and Expression of Water Channel Protein in Tomato Plants

Specific properties of carbon nanotubes, such as their level of agglomeration in the medium and their surface characteristics, can be critical for the physiological response of plants upon application of carbon nanotubes. The correlations among the level of aggregation, the type of functional group on the surface of the carbon nanotubes, and the growth performance of tomato plants are documented.

Comparative study on different carbon nanotube materials in terms of transparent conductive coatings

We compared conductive transparent carbon nanotube coatings on glass substrates made of differently produced single-wall (SWNT), double-wall, and multiwall carbon nanotubes. The airbrushing approach and the vacuum filtration method were utilized for the fabrication of carbon nanotube films. The optoelectronic performance of the carbon nanotube film was found to strongly depend on many effects including the ratio of metallic-to-semiconducting tubes, dispersion, length, diameter, chirality, wall number, structural defects, and the properties of substrates. The electronic transportability and optical properties of the SWNT network can be significantly altered by chemical doping with thionyl chloride. Hall effect measurements revealed that all of these thin carbon nanotube films are of p-type probably due to the acid reflux-based purification and atmospheric impurities. The competition between variable-range hoping and fluctuation-assisted tunneling in the functionized carbon nanotube system could lead to a crossover behavior in the temperature dependence of the network resistance.

Impact of Carbon Nanotube Exposure to Seeds of Valuable Crops

Multiwalled carbon nanotubes (MWCNTs) affected seed germination, growth, and the development of three important crops (barley, soybean, corn). Early seed germination and activation of growth in exposed seedlings was observed when MWCNTs were added to sterile agar medium. Similarly, seed germination was activated for all tested crop species when MWCNTs were deposited on seed surfaces. The ability of MWCNTs to penetrate the seed coats of corn, barley, and soybean was proven by detection of nanotube agglomerates inside MWCNT-exposed seeds using Raman spectroscopy and transmission electron microscopy (TEM). Reverse transcription polymerase chain reaction (RT-PCR) analysis revealed that the expression of genes encoding several types of water channel proteins was increased in soybean, corn, and barley seeds coated with MWCNTs compared with uncoated control seeds. Our results indicate that the positive effect of MWCNTs on the germination and growth of seedlings is reproducible between crop species and can be observed for different methods of delivering carbon nanotubes. Such studies could prove the significant potential of carbon nanotubes as regulators of germination and plant growth.