Aljaž Velikonja

Binding of plasma proteins to titanium dioxide nanotubes with different diameters

Titanium and titanium alloys are considered to be one of the most applicable materials in medical devices because of their suitable properties, most importantly high corrosion resistance and the specific combination of strength with biocompatibility. In order to improve the biocompatibility of titanium surfaces, the current report initially focuses on specifying the topography of titanium dioxide (TiO2) nanotubes (NTs) by electrochemical anodization. The zeta potential (ζ-potential) of NTs showed a negative value and confirmed the agreement between the measured and theoretically predicted dependence of ζ-potential on salt concentration, whereby the absolute value of ζ-potential diminished with increasing salt concentrations. We investigated binding of various plasma proteins with different sizes and charges using the bicinchoninic acid assay and immunofluorescence microscopy. Results showed effective and comparatively higher protein binding to NTs with 100 nm diameters (compared to 50 or 15 nm). We also showed a dose-dependent effect of serum amyloid A protein binding to NTs. These results and theoretical calculations of total available surface area for binding of proteins indicate that the largest surface area (also considering the NT lengths) is available for 100 nm NTs, with decreasing surface area for 50 and 15 nm NTs. These current investigations will have an impact on increasing the binding ability of biomedical devices in the body leading to increased durability of biomedical devices.

Influence of nanoparticle-membrane electrostatic interactions on membrane fluidity and bending elasticity

The aim of this work is to investigate the effect of electrostatic interactions between the nanoparticles and the membrane lipids on altering the physical properties of the liposomal membrane such as fluidity and bending elasticity. For this purpose, we have used nanoparticles and lipids with different surface charges. Positively charged iron oxide (γ-Fe2O3) nanoparticles, neutral and negatively charged cobalt ferrite (CoFe2O4) nanoparticles were encapsulated in neutral lipid 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine and negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine lipid mixture. Membrane fluidity was assessed through the anisotropy measurements using the fluorescent probe 1,6-diphenyl-1,3,5-hexatriene. Though the interaction of both the types of nanoparticles reduced the membrane fluidity, the results were more pronounced in the negatively charged liposomes encapsulated with positively charged iron oxide nanoparticles due to strong electrostatic attractions. X-ray photoelectron spectroscopy results also confirmed the presence of significant quantity of positively charged iron oxide nanoparticles in negatively charged liposomes. Through thermally induced shape fluctuation measurements of the giant liposomes, a considerable reduction in the bending elasticity modulus was observed for cobalt ferrite nanoparticles. The experimental results were supported by the simulation studies using modified Langevin-Poisson-Boltzmann model.

Interaction between Dipolar Lipid Headgroups and Charged Nanoparticles Mediated by Water Dipoles and Ions

In this work, a theoretical model describing the interaction between a positively or negatively charged nanoparticle and neutral zwitterionic lipid bilayers is presented. It is shown that in the close vicinity of the positively charged nanoparticle, the zwitterionic lipid headgroups are less extended in the direction perpendicular to the membrane surface, while in the vicinity of the negatively charged nanoparticle, the headgroups are more extended. This result coincides with the calculated increase in the osmotic pressure between the zwitterionic lipid surface and positively charged nanoparticle and the decrease of osmotic pressure between the zwitterionic lipid surface and the negatively charged nanoparticle. Our theoretical predictions agree well with the experimentally determined fluidity of a lipid bilayer membrane in contact with positively or negatively charged nanoparticles. The prospective significance of the present work is mainly to contribute to better understanding of the interactions of charged nanoparticles with a zwitterionic lipid bilayer, which may be important in the efficient design of the lipid/nanoparticle nanostructures (like liposomes with encapsulated nanoparticles), which have diverse biomedical applications, including targeted therapy (drug delivery) and imaging of cancer cells.

Monovalent Ions and Water Dipoles in Contact with Dipolar Zwitterionic Lipid Headgroups-Theory and MD Simulations

The lipid bilayer is a basic building block of biological membranes and can be pictured as a barrier separating two compartments filled with electrolyte solution. Artificial planar lipid bilayers are therefore commonly used as model systems to study the physical and electrical properties of the cell membranes in contact with electrolyte solution. Among them the glycerol-based polar phospholipids which have dipolar, but electrically neutral head groups, are most frequently used in formation of artificial lipid bilayers. In this work the electrical properties of the lipid layer composed of zwitterionic lipids with non-zero dipole moments are studied theoretically. In the model, the zwitterionic lipid bilayer is assumed to be in contact with aqueous solution of monovalent salt ions. The orientational ordering of water, resulting in spatial variation of permittivity, is explicitly taken into account. It is shown that due to saturation effect in orientational ordering of water dipoles the relative permittivity in the zwitterionic headgroup region is decreased, while the corresponding electric potential becomes strongly negative. Some of the predictions of the presented mean-field theoretical consideration are critically evaluated using the results of molecular dynamics (MD) simulation.

Electroporation Threshold of POPC Lipid Bilayers with Incorporated Polyoxyethylene Glycol (C12E8)

Electroporation relates to a phenomenon in which cell membranes are permeabilized after being exposed to high electric fields. On the molecular level, the mechanism is not yet fully elucidated, although a considerable body of experiments and molecular dynamic (MD) simulations were performed on model membranes. Here we present the results of a combined theoretical and experimental investigation of electroporation of palmitoy-oleoyl-phosphatidylcholine (POPC) bilayers with incorporated polyoxyethylene glycol (C12E8) surfactants. The experimental results show a slight increase of the capacitance and a 22% decrease of the voltage breakdown upon addition of C12E8 to pure POPC bilayers. These results were qualitatively confirmed by the MD simulations. They later revealed that the polyoxyethylene glycol molecules play a major role in the formation of hydrophilic pores in the bilayers above the electroporation threshold. The headgroup moieties of the latter are indeed embedded in the interior of the bilayer, which favors formation of water wires that protrude into its hydrophobic core. When the water wires extend across the whole bilayer, they form channels stabilized by the C12E8 head groups. These hydrophilic channels can transport ions across the membrane without the need of major lipid head-group rearrangements.

Internal configuration and electric potential in planar negatively charged lipid head group region in contact with ionic solution.

The lipid bilayer composed of negatively charged lipid 1-palmitoyl-3-oleoyl-sn-glycero-3-phosphatidylserine (POPS) in contact with an aqueous solution of monovalent salt ions was studied theoretically by using the mean-field modified Langevin-Poisson-Boltzmann (MLPB) model. The MLPB results were tested by using molecular dynamic (MD) simulations. In the MLPB model the charge distribution of POPS head groups is theoretically described by the negatively charged surface which accounts for negatively charged phosphate groups, while the positively charged amino groups and negatively charged carboxylate groups are assumed to be fixed on the rod-like structures with rotational degree of freedom. The spatial variation of relative permittivity, which is not considered in the well-known Gouy-Chapman (GC) model or in MD simulations, is thoroughly derived within a strict statistical mechanical approach. Therefore, the spatial dependence and magnitude of electric potential within the lipid head group region and its close vicinity are considerably different in the MLPB model from the GC model. The influence of the bulk salt concentration and temperature on the number density profiles of counter-ions and co-ions in the lipid head group region and aqueous solution along with the probability density function for the lipid head group orientation angle was compared and found to be in qualitative agreement in the MLPB and MD models.

Specific electrical capacitance and voltage breakdown as a function of temperature for different planar lipid bilayers

The breakdown voltage and specific electrical capacitance of planar lipid bilayers formed from lipids isolated from the membrane of archaeon Aeropyrum pernix K1 as a function of temperature were studied and compared with data obtained previously in MD simulation studies. Temperature dependence of breakdown voltage and specific electrical capacitance was measured also for dipalmitoylphosphatidylcholine (DPPC) bilayers and bilayers formed from mixture of diphytanoylphosphocholine (DPhPC) and DPPC in ratio 80:20. The breakdown voltage of archaeal lipids planar lipid bilayers is more or less constant until 50°C, while at higher temperatures a considerable drop is observed, which is in line with the results from MD simulations. The breakdown voltage of DPPC planar lipid bilayer at melting temperature is considerably higher than in the gel phase. Specific electrical capacitance of planar lipid bilayers formed from archaeal lipids is approximately constant for temperatures up to 40°C and then gradually decreases. The difference with MD simulation predictions is discussed. Specific electrical capacitance of DPPC planar lipid bilayers in fluid phase is 1.75 times larger than that of the gel phase and it follows intermediated phases before phase transition. Increase in specific electrical capacitance while approaching melting point of DPPC is visible also for DPhPC:DPPC mixture.

Electrical Properties of Hydrogenated Planar Lipid Bilayers Formed from Archaea Lipids at Different Temperatures

This paper presents the study of electrical properties of hydrogenated planar lipid bilayers formed from thermophilic archaeal lipids extracted from Aeropyrum pernix K1. Study is focused on measuring electrical capacitance as parameter of the planar lipid bilayer thickness and breakdown voltage as parameter of planar lipid bilayer stability in electric field. The results show that both measured parameters of hydrogenated planar lipid bilayers formed from archeal lipids extracted from A. pernix K1 are not temperature dependant on measured temperature interval between 19 °C and 56 °C. Electrical capacitance is lower than in Molecular Dynamic simulations and in experiments using 2-Oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC) lipids or 2-Oleoyl-1-palmitoyl-sn-glycero-3-phosphoserine (POPS) lipids. Breakdown voltage is higher than in experiments with POPC or POPS lipids.