Allauddin Siddiqi

Antibiotic prophylaxis in third molar surgery: A randomized double-blind placebo-controlled clinical trial using split-mouth technique.

The use of prophylactic antibiotics to reduce postoperative complications in third molar surgery remains controversial. The study was a prospective, randomized, double blind, placebo-controlled clinical trial. 100 patients were randomly assigned to two groups. Each patient acted as their own control using the split-mouth technique. Two unilateral impacted third molars were removed under antibiotic cover and the other two were removed without antibiotic cover. The first group received antibiotics on the first surgical visit. On the second surgical visit (after 3 weeks), placebo capsules were given or vice versa. The second group received antibiotics with continued therapy for 2 days on the first surgical visit and on the second surgical visit (after 3 weeks) placebo capsules were given or vice versa. Pain, swelling, infection, trismus and temperature were recorded on days 3, 7 and 14 after surgery. Of 380 impactions, 6 sockets (2%) became infected. There was no statistically significant difference in the infection rate, pain, swelling, trismus, and temperature between the two groups (p>0.05). Results of the study showed that prophylactic antibiotics did not have a statistically significant effect on postoperative infections in third molar surgery and should not be routinely administered when third molars are removed in non-immunocompromised patients.

Bisphosphonate-induced osteonecrosis of the jaw: a medical enigma?

Bisphosphonates are used for the standard of care of patients with skeletal metastases and hypocalcemia of malignancy. Bisphosphonate-induced osteonecrosis (BION) is a serious complication. Clinically, BION presents as an area of exposed alveolar bone that occurs spontaneously or becomes evident following an invasive surgical procedure such as extraction of a tooth, periodontal surgery, apicoectomy, or oral implant placement. The mechanism by which bisphosphonates cause osteonecrosis is uncertain. There are no controlled trials to show a direct cause-effect relationship between bisphosphonates and osteonecrosis of the jaw. Oral bisphosphonate-induced necrosis is a rare clinical entity, less frequent, less aggressive, more predictable, and more responsive to treatment than IV forms of bisphosphonate-related osteonecrosis of the jaw. However, there have been reports of this complication with the less potent oral forms of bisphosphonates (0.007% to 0.01%). The morbidity of osteonecrosis of the jaw induced by IV bisphosphonates is significant, so prevention should receive prime importance. Patients should receive prophylactic dental examinations, and any necessary dental treatment before starting bisphosphonate therapy. Good communication among dentists, oral surgeons, physicians, and oncologists is of vital importance in providing care of these patients.

Fractured zirconia implants and related implant designs: scanning electron microscopy analysis

OBJECTIVES Two fractured one-piece experimental (commercially unavailable) zirconia implants were analyzed using scanning electron microscope (SEM) analysis to identify failure origins and aid in understanding the failure mechanisms. Modifications to the zirconia implant design are suggested to minimize such fracture incidences. MATERIALS AND METHODS Two zirconia implants fractured during the final torquing in the maxillary ridge using the prescribed hand torque wrench. The implants were subsequently retrieved and prepared for optical and SEM evaluation. Critical attention was given to the fractography (crack morphology) of the fractured implants to identify the fracture origin. RESULTS Events related to initiation and propagation of the crack front could be detected from the morphology of the fractured surfaces. Unfavorable torque and bending forces applied on the implant during surgical placement and the inherent flaws in the material may have resulted in crack initiation and implant failure. CONCLUSIONS Caution must be exercised when placing zirconia implants in dense bone sites. Modification of surgical protocols for the intended implant site may be necessary. Improvement in design features specific to zirconia implants, and strict quality control during manufacture is essential to minimize the likelihood of fracture.

Soft and Hard Tissue Response to Zirconia versus Titanium One‐Piece Implants Placed in Alveolar and Palatal Sites: A Randomized Control Trial

Background Titanium (Ti) implants have been used in the last four decades to replace missing teeth. Alternatives to Ti such as zirconia (Zr) may offer aesthetic advantages and be more acceptable to patients and clinicians concerned about Ti allergy but must show equivalent biological acceptability to Ti. Purpose The research aimed to investigate soft and hard tissue response to Ti and Zr implants in edentulous patients. Materials and Methods The research included 24 participants (Ti = 12, Zr = 12) restored with one-piece ball-abutment implants to support overdentures. Participants received four maxillary implants (two in the premolar alveolus, one off center in the alveolar midline, and one wide-diameter implant in the anterior median palate) and three mandibular implants (one in the midline and bilateral posterior implants). Results Success rates for both Ti and Zr implants were low, 67.9% for all alveolar implants and a survival rate of 50.0% for the palatal implants. Only 11 (52.4%) of 21 palatal implants survived the follow-up period. Peri-implant health was equivalent for Ti and Zr implants and showed no statistically significant changes from loading to the 1-year follow-up. Statistically significant differences were noted in radiographic bone level between Ti and Zr implants (p = .02), with Zr showing greater bone loss. Conclusions Although the failure rates with the one-piece Zr implants were higher than with the Ti ones, suggesting that the formers clinical usage as in this study cannot be recommended, it should be borne in mind that the fault may also lie with the novel prosthodontic design which was used.BACKGROUND Titanium (Ti) implants have been used in the last four decades to replace missing teeth. Alternatives to Ti such as zirconia (Zr) may offer aesthetic advantages and be more acceptable to patients and clinicians concerned about Ti allergy but must show equivalent biological acceptability to Ti. PURPOSE The research aimed to investigate soft and hard tissue response to Ti and Zr implants in edentulous patients. MATERIALS AND METHODS The research included 24 participants (Ti = 12, Zr = 12) restored with one-piece ball-abutment implants to support overdentures. Participants received four maxillary implants (two in the premolar alveolus, one off center in the alveolar midline, and one wide-diameter implant in the anterior median palate) and three mandibular implants (one in the midline and bilateral posterior implants). RESULTS Success rates for both Ti and Zr implants were low, 67.9% for all alveolar implants and a survival rate of 50.0% for the palatal implants. Only 11 (52.4%) of 21 palatal implants survived the follow-up period. Peri-implant health was equivalent for Ti and Zr implants and showed no statistically significant changes from loading to the 1-year follow-up. Statistically significant differences were noted in radiographic bone level between Ti and Zr implants (p = .02), with Zr showing greater bone loss. CONCLUSIONS Although the failure rates with the one-piece Zr implants were higher than with the Ti ones, suggesting that the formers clinical usage as in this study cannot be recommended, it should be borne in mind that the fault may also lie with the novel prosthodontic design which was used.

Knife inflicted penetrating injuries of the maxillofacial region: A descriptive, record-based study

UNLABELLED Penetrating knife injuries of the face are more common in South Africa than the rest of the world. These injuries can be life-threatening, especially where the major blood vessels of the face are involved. The approach to treatment should be multidisciplinary, beginning with the trauma unit to provide airway maintenance and haemodynamic stabilisation. An interventional radiologist may be consulted for angiography. The aim of the present study was to retrospectively analyse all cases of knife-inflicted penetrating injuries to the maxillofacial region with the knife in situ and subsequently develop a management protocol to be used by maxillofacial surgery registrars when presented with such cases. MATERIALS AND METHODS It was a retrospective, cross-sectional and record-based study, analysing all penetrating knife injuries reported at various hospitals for a period of 11 years. In this study, 24 cases of knife injuries were analysed. RESULTS Twenty-one patients (87.5%) in this series were male and three (12.5%) were female. Of these 24 patients, 13 (54.2%) were coloured and 11 (45.8%) were black. There were no white or Indian patients. Post-surgical recovery of all patients was rapid and uneventful, and there were no fatalities. CONCLUSION Patients with knife injuries to the face with no definite signs of vascular injury can thus be safely and accurately managed on the basis of physical examination and plain-film radiography. An angiogram is mandatory if the patient presents with excessive bleeding, an expanding haematoma or if the knife blade is in the region of any large vessels.

Could the median-palate accommodate wide-bodied implants in order to support maxillary over-dentures? A radiomorphometric study of human cadavers

INTRODUCTION Atrophy of the alveolar bone is an irreversible multifactorial phenomenon, the rate of which varies between individuals and between the jaws. This atrophy of the alveolar ridges presents severe limitations for the oral rehabilitation of the edentulous patients and poses a clinical challenge to the prosthodontists and implant surgeons. The present research aimed to investigate whether the median-palate of elderly edentulous subjects is anatomically suitable for implant placement. MATERIALS AND METHODS A total of 32 samples were harvested from the maxillae of 16 human cadavers. One dentate male subject was included for contrast. Bone quality and quantity were analysed at two regions: the median-palate and the edentulous maxillary alveolar ridge. Samples were scanned through micro-CT, and the region of analysis (ROA) identified and dissected. Bone volume to tissue volume ratio (%BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.Sp) and trabecular bone pattern factor (Tb.Pf) were evaluated for the two regions using Skyscan CTAn(®). RESULTS The results of bone volume fraction obtained from CTAn(®) of the median-palatal region show higher values than the respective premolar sites in 12 of 15 (80%) edentulous samples. However, this difference was statistically non-significant (P = 0.06). Similarly, the trabecular number for 10 of 15 samples (66.6%) from the median-palate shows greater values than the respective premolar site (P = 0.07). Trabecular thickness of 10 of 15 (66.6%) premolar samples is larger than in the median-palatal region. However, these differences were also statistically non-significant (P = 0.25). Statistically significant difference (P = 0.04) was found between the Tb.Sp values of the two regions. CONCLUSION The results indicate that the anterior median-palate is structurally better than their respective maxillary premolar region in elderly edentulous persons, and an implant can be placed to anchor an overdenture. The best site for a wide-body implant was established to be 6-8 mm posterior to the incisive foramen in elderly edentulous patients.

One-Piece Zirconia Ceramic versus Titanium Implants in the Jaw and Femur of a Sheep Model: A Pilot Study

Reports have documented titanium (Ti) hypersensitivity after dental implant treatment. Alternative materials have been suggested including zirconia (Zr) ceramics, which have shown predictable osseointegration in animal studies and appear free of immune responses. The aim of the research was to investigate the bone-to-implant contact (BIC) of one-piece Zr, compared with one-piece Ti implants, placed in the jaws and femurs of domestic sheep. Ten New Zealand mixed breed sheep were used. A One-piece prototype Ti (control) and one Zr (test) implant were placed in the mandible, and one of each implant (Ti and Zr) was placed into the femoral epicondyle of each animal. The femur implants were submerged and unloaded; the mandibular implants were placed using a one-stage transgingival protocol and were nonsubmerged. After a healing period of 12 weeks, %BIC was measured. The overall survival rate for mandibular and femur implants combined was 87.5%. %BIC was higher for Zr implants versus Ti implants in the femur (85.5%, versus 78.9%) (p = 0.002). Zirconia implants in the mandible showed comparable %BIC to titanium implants (72.2%, versus 60.3%) (p = 0.087). High failure rate of both Zr and Ti one-piece implants in the jaw could be attributed to the one-piece design and surface characteristics of the implant that could have influenced osseointegration. Further clinical trials are recommended to evaluate the performance of zirconia implants under loading conditions.

Analysis of P. gingivalis, T. forsythia and S. aureus levels in edentulous mouths prior to and 6 months after placement of one-piece zirconia and titanium implants

BACKGROUND It has been suggested that completely edentulous patients harbour fewer periodontopathic bacteria compared with dentate patients, due to the removal of the subgingival periodontal environment. However, reappearance of certain microbes has been reported after the placement of implants in these patients. AIM The aim of this study was to determine whether the periodontopathic bacteria Porphyromonas gingivalis and Tannerella forsythia, as well as the non-periodontopathic bacterium, Staphylococcus aureus, emerged in edentulous patients 6 months after placement of one-piece zirconia and titanium implants. MATERIALS AND METHODS Twenty-six patients were included in the study (titanium = 13, zirconia = 13). Microbial samples were collected from the tongue prior to implant placement and 6 months after implant placement from both the tongue and from around the implants. A qRT-PCR assay using SYBR green/ROX chemistry was used for the detection and quantification of rgp, nuc and karilysin single-copy gene of P. gingivalis, T. forsythia and S. aureus, respectively. Positive controls used in the study were pure bacterial gDNA purified from cultures of P. gingivalis and S. aureus, a cloned sequence of the karilysin gene for T. forsythia, a plaque sample positive for P. gingivalis and T. forsythia, and nasal gDNA for S. aureus. RESULTS The results show that prior to implant placement, all three bacterial species were below the lower limit of quantification in all edentulous patients. The samples collected from the tongue and around the implants remained below the lower limit of quantification for each of the three species. However, all positive controls used in the study were detectable in the samples. qPCR standard curves showed correlation coefficients >0.97 and efficiencies >94.5% (slope range -3.19 to -3.46) for each of the SYBR green PCR assays. CONCLUSION The results of this study indicate that the tested organisms did not emerge 6 months after implant placement irrespective of the nature of the implant biomaterial. A further follow-up of at least 2 years post-implantation of these patients is suggested to determine whether there are any changes in the oral microbiota and whether such changes are associated with the development of peri-implant disease.