Alper Unal

The impact of anthropogenic and biogenic emissions on surface ozone concentrations in Istanbul.

Surface ozone concentrations at Istanbul during a summer episode in June 2008 were simulated using a high resolution and urban scale modeling system coupling MM5 and CMAQ models with a recently developed anthropogenic emission inventory for the region. Two sets of base runs were performed in order to investigate for the first time the impact of biogenic emissions on ozone concentrations in the Greater Istanbul Area (GIA). The first simulation was performed using only the anthropogenic emissions whereas the second simulation was performed using both anthropogenic and biogenic emissions. Biogenic NMVOC emissions were comparable with anthropogenic NMVOC emissions in terms of magnitude. The inclusion of biogenic emissions significantly improved the performance of the model, particularly in reproducing the low night time values as well as the temporal variation of ozone concentrations. Terpene emissions contributed significantly to the destruction of the ozone during nighttime. Biogenic NMVOCs emissions enhanced ozone concentrations in the downwind regions of GIA up to 25ppb. The VOC/NO(x) ratio almost doubled due to the addition of biogenic NMVOCs. Anthropogenic NO(x) and NMVOCs were perturbed by ±30% in another set of simulations to quantify the sensitivity of ozone concentrations to the precursor emissions in the region. The sensitivity runs, as along with the model-calculated ozone-to-reactive nitrogen ratios, pointed NO(x)-sensitive chemistry, particularly in the downwind areas. On the other hand, urban parts of the city responded more to changes in NO(x) due to very high anthropogenic emissions.

Evaluation and error apportionment of an ensemble of atmospheric chemistry transport modeling systems : Multivariable temporal and spatial breakdown

Through the comparison of several regional-scale chemistry transport modeling systems that simulate meteorology and air quality over the European and North American continents, this study aims at (i) apportioning error to the responsible processes using timescale analysis, (ii) helping to detect causes of model error, and (iii) identifying the processes and temporal scales most urgently requiring dedicated investigations. The analysis is conducted within the framework of the third phase of the Air Quality Model Evaluation International Initiative (AQMEII) and tackles model performance gauging through measurement-to-model comparison, error decomposition, and time series analysis of the models biases for several fields (ozone, CO, SO2, NO, NO2, PM10, PM2.5, wind speed, and temperature). The operational metrics (magnitude of the error, sign of the bias, associativity) provide an overallsense of model strengths and deficiencies, while apportioning the error to its constituent parts (bias, variance, and covariance) can help assess the nature and quality of the error. Each of the error components is analyzed independently and apportioned to specific processes based on the corresponding timescale (long scale, synoptic, diurnal, and intraday) using the error apportionment technique devised in the former phases of AQMEII. The application of the error apportionment method to the AQMEII Phase 3 simulations provides several key insights. In addition to reaffirming the strong impact of model inputs (emission and boundary conditions) and poor representation of the stable boundary layer on model bias, results also highlighted the high interdependencies among meteorological and chemical variables, as well as among their errors. This indicates that the evaluation of air quality model performance for individual pollutants needs to be supported by complementary analysis of meteorological fields and chemical precursors to provide results that are more insightful from a model development perspective. This will require evaluaion methods that are able to frame the impact on error of processes, conditions, and fluxes at the surface. For example, error due to emission and boundary conditions is dominant for primary species (CO, particulate matter (PM)), while errors due to meteorology and chemistry are most relevant to secondary species, such as ozone. Some further aspects emerged whose interpretation requires additional consideration, such as the uniformity of the synoptic error being region- and model-independent, observed for several pollutants; the source of unexplained variance for the diurnal component; and the type of error caused by deposition and at which scale.

Compilation of a GIS based high spatially and temporally resolved emission inventory for the greater Istanbul area

Emission inventories are a fundamental input to atmospheric chemical transport models (CTMs). As the latter become increasingly demanding, modern inventories began to provide much more information (high spatial and temporal disaggregation, more chemical compounds etc). In this study we present a computational approach, an emission processing kernel that is used to compile a high spatially and temporally resolved emission inventory for the anthropogenic sources covering the Greater Istanbul Area (GIA) for the reference year 2007. The emission processor is used to produce emissions for a 92 x 57 km area covering the GIA with 2 km grid resolution. The emission inventory has high temporal resolution, covering monthly, weekly and diurnal processing and includes CO, NOx, SOx, NH3, and chemically speciated PM10, PM2.5 and NMVOCs emissions. PM10 and PM2.5 are chemically split into organic carbon, elemental carbon, sulfates, nitrates, ammonium and other particles while NMVOCs are chemically speciated into 23 chemical compounds. The compilation process includes the use of various activity information and statistical data that were gathered from local official authorities and experts, measurements, published studies for the region or extracted from pre–existing databases. The results indicate that the road transport sector is the main contributor to the emissions in the area, whereas residential combustion (for SOx) and solvent use (for NMVOCs) are also important source categories. Industrial combustion is found out to be the main SOx emitter. The temporal calculations show that monthly distributions follow the seasonal variation for most of the pollutants with higher emissions in winter time. Diurnal calculations show that the profile fits with the rush hours due to the highest contribution of traffic emissions.

Spatial and temporal analysis of black carbon aerosols in Istanbul megacity.

Black carbon (BC) is an important component of particulate matter due to its effects on human health and climate. In this study, we present the first BC concentrations measured in the Istanbul megacity (~15 million inhabitants). Two measurement campaigns have been conducted to measure BC and fine particulate matter (PM2.5) concentrations at four locations, characterized by different traffic densities. In the first campaign, BC daily mean concentrations have been found to be between 4 μg/m(3) and 10 μg/m(3). In the second campaign, BC and PM2.5 have been measured at the site with the highest traffic density for an entire year. Annually averaged BC contributes by 38 ± 14% to the PM2.5 levels (annual average BC: 13 μg/m(3) and PM2.5: 36 μg/m(3)). Diurnal variations of BC concentrations followed those of traffic density (correlation coefficient of 0.87). These measurements are essential to identify the sources of BC and PM2.5 concentrations in Istanbul and develop mitigation measures.

The contribution of Saharan dust in PM10 concentration levels in Anatolian Peninsula of Turkey

Sahara-originated dust is the most significant natural source of particulate matter; however, this contribution is still unclear in the Eastern Mediterranean especially in Western Turkey, where significant industrial sources and metropolitan areas are located. The Real-time Air Quality Modeling System (RAQMS) is utilized to explore the possible effects of Saharan dust on high levels of PM10 measured in Turkey. RAQMS model is compared with 118-air quality stations distributed throughout Turkey (81 cities) for April 2008. MODIS aerosol product (MOD04 for Terra and MYD04 for Aqua) is used to see columnar aerosol loading of the atmosphere at 550 nm (Aerosol optical depth (AOD) values found to be between 0.6 and 0.8 during the episode). High-resolution vertical profiles of clouds and aerosols are provided from CALIOP, on board of CALISPO satellite. The results suggest a significant contribution of Sahara dust to high levels of PM10 in Turkey with RAQMS and in situ time series showing similar patterns. The two data sets are found to be in agreement with a correlation of 0.87.

Quantification of the Urban Heat Island Under a Changing Climate over Anatolian Peninsula

The Anatolian Peninsula is located at the confluence of Europe, Asia, and Africa and houses 81 cities of which 79 of them have population over 100,000. We employed some criteria to select the cities from the 81 cities. After accomplishing all the criteria, eight cities were remaining for the study. Nonparametric Mann–Kendall test procedure was employed for the urban and rural stations of these cities to detect the long-term change in temperature trends. Statistical analysis of daily minimum temperatures for the period between 1965 and 2006 suggest that there is no statistically significant increase in rural areas. In contrast to the findings of the previous studies, however, all the urban sites and difference between urban and rural pairs show significant increase in temperatures, a strong indication for the existence of urban heat island (UHI) affect over the region. Regional Climate Model was also utilized to assess the changes in temperature by the end of century for the region. The findings suggest that an increase of up to 5°C is possible. Climate change effects enforced with UHI have the potential to cause serious problems for the entire region and hence needs to be studied thoroughly.

Assessment and economic valuation of air pollution impacts on human health over Europe and the United States as calculated by a multi-model ensemble in the framework of AQMEII3

The impact of air pollution on human health and the associated external costs in Europe and the United States (US) for the year 2010 are modeled by a multi-model ensemble of regional models in the frame of the third phase of the Air Quality Modelling Evaluation International Initiative (AQMEII3). The modeled surface concentrations of O3, CO, SO2 and PM2.5 are used as input to the Economic Valuation of Air Pollution (EVA) system to calculate the resulting health impacts and the associated external costs from each individual model. Along with a base case simulation, additional runs were performed introducing 20 % anthropogenic emission reductions both globally and regionally in Europe, North America and east Asia, as defined by the second phase of the Task Force on Hemispheric Transport of Air Pollution (TF-HTAP2). Health impacts estimated by using concentration inputs from different chemistry–transport models (CTMs) to the EVA system can vary up to a factor of 3 in Europe (12 models) and the United States (3 models). In Europe, the multi-model mean total number of premature deaths (acute and chronic) is calculated to be 414 000, while in the US, it is estimated to be 160 000, in agreement with previous global and regional studies. The economic valuation of these health impacts is calculated to be EUR 300 billion and 145 billion in Europe and the US, respectively. A subset of models that produce the smallest error compared to the surface observations at each time step against an all-model mean ensemble results in increase of health impacts by up to 30 % in Europe, while in the US, the optimal ensemble mean led to a decrease in the calculated health impacts by ~ 11 %. A total of 54 000 and 27 500 premature deaths can be avoided by a 20 % reduction of global anthropogenic emissions in Europe and the US, respectively. A 20 % reduction of North American anthropogenic emissions avoids a total of ~ 1000 premature deaths in Europe and 25 000 total premature deaths in the US. A 20 % decrease of anthropogenic emissions within the European source region avoids a total of 47 000 premature deaths in Europe. Reducing the east Asian anthropogenic emissions by 20 % avoids ~ 2000 total premature deaths in the US. These results show that the domestic anthropogenic emissions make the largest impacts on premature deaths on a continental scale, while foreign sources make a minor contribution to adverse impacts of air pollution.

Simulated air quality and pollutant budgets over Europe in 2008

Major gaseous and particulate pollutant levels over Europe in 2008 have been simulated using the offline-coupled WRFCMAQ chemistry and transport modeling system. The simulations are compared with surface observations from the EMEP stations, ozone (O3) soundings, ship-borne O3 and nitrogen dioxide (NO2) observations in the western Mediterranean, tropospheric NO2 vertical column densities from the SCIAMACHY instrument, and aerosol optical depths (AOD) from the AERONET. The results show that on average, surface O3 levels are underestimated by 4 to 7% over the northern European EMEP stations while they are overestimated by 7-10% over the southern European EMEP stations and underestimated in the tropospheric column (by 10-20%). Particulate matter (PM) mass concentrations are underestimated by up to 60%, particularly in southern and eastern Europe, suggesting underestimated PM sources. Larger differences are calculated for individual aerosol components, particularly for organic and elemental carbon than for the total PM mass, indicating uncertainty in the combustion sources. Better agreement has been obtained for aerosol species over urban areas of the eastern Mediterranean, particularly for nss-SO4(2), attributed to the implementation of higher quality emission inventories for that area. Simulated AOD levels are lower than the AERONET observations by 10% on average, with average underestimations of 3% north of 40°N, attributed to the low anthropogenic emissions in the model and 22% south of 40°N, suggesting underestimated natural and resuspended dust emissions. Overall, the results reveal differences in the model performance between northern and southern Europe, suggesting significant differences in the representation of both anthropogenic and natural emissions in these regions. Budget analyses indicate that O3 and peroxyacetyl nitrate (PAN) are transported from the free troposphere (FT) to the planetary boundary layer over Europe, while other species follow the reverse path and are then advected away from the source region.

Modeled deposition of nitrogen and sulfur in Europe estimated by 14 air quality model systems: evaluation, effects of changes in emissions and implications for habitat protection

The evaluation and intercomparison of air quality models is key to reducing model errors and uncertainty. The projects AQMEII3 and EURODELTA-Trends, in the framework of the Task Force on Hemispheric Transport of Air Pollutants and the Task Force on Measurements and Modelling, respectively (both task forces under the UNECE Convention on the Long Range Transport of Air Pollution, LTRAP), have brought together various regional air quality models to analyze their performance in terms of air concentrations and wet deposition, as well as to address other specific objectives. This paper jointly examines the results from both project communities by intercomparing and evaluating the deposition estimates of reduced and oxidized nitrogen (N) and sulfur (S) in Europe simulated by 14 air quality model systems for the year 2010. An accurate estimate of deposition is key to an accurate simulation of atmospheric concentrations. In addition, deposition fluxes are increasingly being used to estimate ecological impacts. It is therefore important to know by how much model results differ and how well they agree with observed values, at least when comparison with observations is possible, such as in the case of wet deposition. This study reveals a large variability between the wet deposition estimates of the models, with some performing acceptably (according to previously defined criteria) and others underestimating wet deposition rates. For dry deposition, there are also considerable differences between the model estimates. An ensemble of the models with the best performance for N wet deposition was made and used to explore the implications of N deposition in the conservation of protected European habitats. Exceedances of empirical critical loads were calculated for the most common habitats at a resolution of 100 × 100 m2 within the Natura 2000 network, and the habitats with the largest areas showing exceedances are determined. Moreover, simulations with reduced emissions in selected source areas indicated a fairly linear relationship between reductions in emissions and changes in the deposition rates of N and S. An approximate 20 % reduction in N and S deposition in Europe is found when emissions at a global scale are reduced by the same amount. European emissions are by far the main contributor to deposition in Europe, whereas the reduction in deposition due to a decrease in emissions in North America is very small and confined to the western part of the domain. Reductions in European emissions led to substantial decreases in the protected habitat areas with critical load exceedances (halving the exceeded area for certain habitats), whereas no change was found, on average, when reducing North American emissions in terms of average values per habitat.

The influence of atmospheric circulation types on regional patterns of precipitation in Marmara (NW Turkey)

In this study, regional patterns of precipitation in Marmara are described for the first time by means of Ward’s hierarchical cluster analysis. Daily values of winter precipitation data based on 19 meteorological stations were used for the period from 1960 to 2012. Five clusters of coherent zones were determined, namely Black Sea-Marmara, Black Sea, Marmara, Thrace, and Aegean sub-regions. To investigate the prevailing atmospheric circulation types (CTs) that cause precipitation occurrence and intensity in these five different rainfall sub-basins, objective Lamb weather type (LWT) methodology was applied to National Centers of Environmental Prediction (NCEP)/National Center for Atmospheric Research (NCAR) reanalysis of daily mean sea level pressure (MSLP) data. Precipitation occurrence suggested that wet CTs (i.e. N, NE, NW, and C) offer a high chance of precipitation in all sub-regions. For the eastern (western) part of the region, the high probability of rainfall occurrence is shown under the influence of E (SE, S, SW) atmospheric CTs. In terms of precipitation intensity, N and C CTs had the highest positive gradients in all the sub-basins of the Marmara. In addition, although Marmara and Black Sea sub-regions have the highest daily rainfall potential during NE types, high daily rainfall totals are recorded in all sub-regions except the Black Sea during NW types.