Anant Paradkar

Spray-Dried Amorphous Solid Dispersions of Simvastatin, a Low Tg Drug: In Vitro and in Vivo Evaluations

PurposeTo obtain free flowing, stable, amorphous solid dispersions (SDs) of simvastatin (SIM), a drug with relatively lower glass transition temperature (Tg) by spray drying technique, and to perform comparative in vivo study in rats, which could justify the improvement in rate and extent of in vitro drug release.MethodsDichloromethane suspensions of SIM either alone or in combination with PVP (1:1 or 1:2 parts by weight) were spray dried with proposed quantity of Aerosil 200 (1:1, 1:1:1, 1:2:2 parts by weight of SIM, Aerosil 200 and PVP, respectively). SDs were characterized initially in comparison with pure drug and corresponding physical mixtures in same ratios by drug content, saturation solubility, SEM, DSC, XRPD, IR, and in vitro drug release. SD 1:2:2 was further subjected to accelerated stability testing and checked for in vitro drug release and presence of crystallinity using DSC and XRPD. In addition, improvement in rate and extent of in vitro drug release from SD 1:2:2 was justified by in vivo study in rats.ResultsCombination of SD and surface adsorption techniques has been attempted to overcome the limitations of spray drying technique for amorphization of low Tg drugs. Based on powder characteristics, drug content, saturation solubility, and feasibility of processing into tablets; SD 1:2:2 was selected as the optimized formulation. During initial characterization, SEM, DSC, and XRPD analyses confirmed the presence of amorphous form in SD 1:2:2. IR spectroscopy revealed possibility of hydrogen bonding interaction between SIM and PVP in SDs. Also, there was dramatical improvement in rate and extent of in vitro drug release of SD 1:2:2. Insignificant decrease in dissolution was observed with no evidence of crystallinity during accelerated stability studies of SD 1:2:2. Moreover in vivo study in rats also justified the improvement in therapeutic efficacy of SD 1:2:2 over pure SIM.ConclusionsThus, present study demonstrates high potential of spray drying technique for obtaining stable amorphous SDs of low Tg drugs.

Transferrin mediated solid lipid nanoparticles containing curcumin: Enhanced in vitro anticancer activity by induction of apoptosis

Photodegradation and low bioavailability are major hurdles for the therapeutic use of curcumin. Aim of the present study was to formulate transferrin-mediated solid lipid nanoparticles (Tf-C-SLN) to increase photostability, and enhance its anticancer activity against MCF-7 breast cancer cells. Tf-C-SLN were prepared by homogenization method and characterized by size, zeta potential, entrapment efficiency and stability, transmission electron microscopy (TEM), X-ray diffraction (XRD) and in vitro release study. Microplate analysis and flow cytometry techniques were used for cytotoxicity and apoptosis study. The physical characterization showed the suitability of method of preparation. TEM and XRD study revealed the spherical nature and entrapment of curcumin in amorphous form, respectively. The cytotoxicity, ROS and cell uptake was found to be increased considerably with Tf-C-SLN compared to curcumin solubilized surfactant solution (CSSS) and curcumin-loaded SLN (C-SLN) suggesting the targeting effect. AnnexinV-FITC/PI double staining, DNA analysis and reduced mitochondrial potential confirmed the apoptosis. The flow cytometric studies revealed that the anticancer activity of curcumin is enhanced with Tf-C-SLN compared to CSSS and C-SLN, and apoptosis is the mechanism underlying the cytotoxicity. The present study indicated the potential of Tf-C-SLN in enhancing the anticancer effect of curcumin in breast cancer cells in vitro.

Cocrystalization and Simultaneous Agglomeration Using Hot Melt Extrusion

ABSTRACTPurposeTo explore hot melt extrusion (HME) as a scalable, solvent-free, continuous technology to design cocrystals in agglomerated form.MethodsCocrystal agglomerates of ibuprofen and nicotinamide in 1:1 ratio were produced using HME at different barrel temperature profiles, screw speeds, and screw configurations. Product was characterized for crystallinity by XRPD and DSC, while the morphology was determined by SEM. Dissolution rate and tabletting properties were compared with ibuprofen.ResultsProcess parameters significantly affected the extent of cocrystallization which improved with temperature, applied shear and residence time. Processing above eutectic point was required for cocrystallization to occur, and it improved with mixing intensity by changing screw configuration. Product was in the form of spherical agglomerates, which showed directly compressible nature with enhanced dissolution rate compared to ibuprofen. This marks an important advantage over the conventional techniques, as it negates the need for further size modification steps.ConclusionsA single-step, scalable, solvent-free, continuous cocrystallization and agglomeration technology was developed using HME, offering flexibility for tailoring the cocrystal purity. HME being an established technology readily addresses the regulatory demand of quality by design (QbD) and process analytical technology (PAT), offering high potential for pharmaceuticals.

Preparation of amorphous cefuroxime axetil nanoparticles by sonoprecipitation for enhancement of bioavailability

The aim of the present work was to prepare amorphous discreet nanoparticles by sonoprecipitation method for enhancing oral bioavailability of cefuroxime axetil (CA), a poorly water-soluble drug. CA nanoparticles (SONO-CA) were prepared by sonoprecipitation and compared with particles obtained by precipitation without sonication (PPT-CA) and amorphous CA obtained by spray drying. Spray drying present broad particle size distribution (PSD) with mean particle size of 10 microm and low percent yield, whereas, precipitation without sonication resulted in large amorphous aggregates with broad PSD. During sonoprecipitation, particle size and yield improve with an increase in the amplitude of sonication and lowering the operation temperature due to instantaneous supersaturation and nucleation. The overall symmetry and purity of CA molecule was maintained as confirmed by FTIR and HPLC, respectively. All the three methods resulted in the formation of amorphous CA with only sonoprecipitation resulting in uniform sized nanoparticles. Sonoprecipitated CA nanoparticles showed enhanced dissolution rate and oral bioavailability in Wistar rat due to an increased solubility attributed to combination of effects like amorphization and nanonization with increased surface area and reduced diffusion pathway.

Preparation and characterization of etoricoxib solid dispersions using lipid carriers by spray drying technique

The basic objectives of this study were to prepare and characterize solid dispersions of poorly water-soluble drug etoricoxib using lipid carriers by spray drying technique. The properties of solid dispersions were studied by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), differential scanning calorimetry (DSC), hotstage microscopy (HSM), radiograph powder diffraction (XRPD), and dissolution studies. The absence of etoricoxib peaks in XRPD profiles of solid dispersions suggests the transformation of crystalline etoricoxib into an amorphous form. In the HSM examination of solid dispersions, the dissolution of drug in the lipid carriers was observed, which was also confirmed by the absence of etoricoxib peak in DSC curves of solid dispersions. The DRIFTS spectra revealed the presence of hydrogen bonding in solid dispersions. The in vitro dissolution rate of solid dispersions as compared with pure etoricoxib, spray-dried etoricoxib, and physical mixtures of drug with lipid carriers. Therefore, the dissolution rate of poorly water-soluble drug etoricoxib can be significantly enhanced by the preparation of solid dispersions using lipid carriers by spray drying technique.

Particle engineering using sonocrystallization: salbutamol sulphate for pulmonary delivery.

The aim of present work was to produce fine elongated crystals of salbutamol sulphate (SS) by sonocrystallization for pulmonary delivery and compare with micronized and spray dried SS (SDSS) for in vitro aerosolization behavior. Application of ultrasound during anti-solvent crystallization resulted in fine elongated crystals (sonocrystallized SS; SCSS) compared to aggregates of large irregular crystals obtained without sonication. Higher sonication amplitude, time, concentration and lower processing temperatures favored formation of smaller crystals with narrow particle size distribution (PSD). SCSS was separated from dispersion by spray drying in the form of loose aggregates (SD-SCSS). The fine particle fraction (FPF) of formulations with coarse lactose carrier in cascade impactor increased from 16.66% for micronized SS to 31.12% for SDSS (obtained by spray drying aqueous SS solution) and 44.21% for SD-SCSS, due to reduced cohesive/adhesive forces and aerodynamic size by virtue of elongated shape of crystals. SD-SCSS was stable without any change in crystallinity and aerodynamic behavior for 3 months at 40 degrees C/75% RH, but amorphous SDSS showed recrystallization with poor aerosolization performance on storage. Sonocrystallization, a rapid and simple technique is reported for production of SS crystals suitable for inhalation delivery.

Effect of Formulation Variables on Preparation and Evaluation of Gelled Self-emulsifying Drug Delivery System (SEDDS) of Ketoprofen

The purpose of this study was to formulate a gelled self-emulsifying drug delivery system (SEDDS) containing ketoprofen as an intermediate in the development of sustained release solid dosage form. Captex 200 (an oil), Tween 80 (a surfactant), and Capmul MCM (a cosurfactant) were used to formulate SEDDS. Silicon dioxide was used as a gelling agent, which may aid in solidification and retardation of drug release. Effect of concentrations of cosurfactant and gelling agent on emulsification process and in vitro drug diffusion was studied using 32 factorial design. Multiple regression analysis data and response surfaces obtained showed that liquid crystal phase viscosity increased significantly with increasing amount of silicon dioxide, which in turn caused an increase in average droplet size of resultant emulsion and slower drug diffusion. Drug release from the formulation increased with increasing amount of cosurfactant.

Formulation of a self-emulsifying system for oral delivery of simvastatin: in vitro and in vivo evaluation.

Formulation of a self-emulsifying system for oral delivery of simvastatin: In vitro and in vivo evaluation The objective of the present work was to formulate a self-emulsifying drug delivery system (SEDDS) for simvastatin, which is widely used in the treatment of hypercholesterolemia and dyslipidemia as an adjunct to diet. Simvastatin SEDDS were formulated using a 1:1 (V/V) mixture of diesters of caprylic/capric acids and polyglycolyzed glycerides with varying concentrations of polyoxy castor oil and C8/C10 mono-/diglycerides. The developed SEDDS were evaluated for turbidimetry, droplet size analysis, drug content and in vitro diffusion profiles. In vivo performance of the optimized formulation was evaluated in rats using pharmacodynamic marker parameters like plasma total cholesterol (CH), triglycerides (TG) and high-density lipoprotein (HDL-CH) for 21 days. SEDDS containing 9.1% (m/m) simvastatin and 23.0% (m/m) of each excipient showed minimum mean droplet size (124 nm) and optimal drug diffusion. This test formulation showed significant reduction in plasma CH and TG (around 5-fold and 4-fold, respectively), while HDL-CH concentration was markedly higher (2-fold) compared a reference simvastatin suspension formulation after oral administration for 21 days of study. Test formulation has shown enhanced pharmacodynamic performance compared to reference formulation in rats. The study illustrated the potential of simvastatin SEDDS for oral administration and its biopharmaceutic performance.

Effect of potassium chloride and cationic drug on swelling, erosion and release from κ-carrageenan matrices

The basic objective of this work was to study the effect of model cationic drug metformin HCl on swelling and erosion and, in turn, the release of KCl and drug itself, from the κ-carrageenan matrices. Water uptake by the matrix up to 2 hours was found to increase with KCl concentration from the plain matrix. Erosion was not affected by concentration of KCl. Incorporation of drug favors water uptake, but in presence of KCl it was found to be reduced. Drugcontaining matrices have shown higher release of KCl as compared with plain batches. Drug release was retarded as KCl concentration increased up to 5%, above which the reduced cohesivity of the matrix caused increase in drug release.

Development of curcuminoids loaded poly(butyl) cyanoacrylate nanoparticles: physicochemical characterization and stability study.

Curcumininoids, obtained from the rhizomes of Curcuma longa L., Zingiberaceae (turmeric), are the most widely used phytoconstituent in food industry and recently for its therapeutic activity. It has very wide spectrum of therapeutic use like in inflammation, psoriasis, various tumors, wound healing and also in neurodegenerative diseases like Alzheimers disease. But its highly lipophilic nature and very poor bioavailability hampers its therapeutic usefulness. Poly(butyl) cyanoacrylate (PBCA) nanoparticles coated with poloxamer 188 containing curcuminoids were prepared by anionic polymerization using solvent evaporation method. The particle size and zeta potential of prepared liposomes was 178nm and -28.33 respectively with 77.99% encapsulation efficiency. The TEM study revealed the spherical nature of the prepared nanoparticles alongwith confirmation of particle size. The polymerization and entrapment of curcuminoids was confirmed using H(1) NMR study by comparing the spectra of nanoparticles with that of curcuminoids. DSC study revealed that curcuminoids was entrapped inside the nanoparticles in molecular dispersion form. In vitro release study showed that the prepared PBCA nanoparticles are capable of controlled drug release (following matrix model) for extended period of time with higher release in acidic environment compared to PB 7.4 suggesting the usefulness of the prepared nanoparticles for intracellular delivery. The mean particle size, zeta potential and the amount of curcuminoids showed no significant changes compared to the freshly prepared PBCA nanoparticles after storage for 6 months at 40 degrees C/75% RH in the presence and absence of sunlight.