André Tortamano

Low-level laser therapy for pain caused by placement of the first orthodontic archwire: A randomized clinical trial

INTRODUCTION The purpose of this study was to clinically evaluate the effect of low-level laser therapy (LLLT) as a method of reducing pain reported by patients after placement of their first orthodontic archwires. METHODS The sample comprised 60 orthodontic patients (ages, 12-18 years; mean, 15.9 years). All patients had fixed orthodontic appliances placed in 1 dental arch (maxillary or mandibular), received the first archwire, and were then randomly assigned to the experimental (laser), placebo, or control group. This was a double-blind study. LLLT was started in the experimental group immediately after placement of the first archwire. Each tooth received a dose of 2.5 J per square centimeter on each side (buccal and lingual). The placebo group had the laser probe positioned into the mouth at the same areas overlying the dental root and could hear a sound every 10 seconds. The control group had no laser intervention. All patients received a survey to be filled out at home describing their pain during the next 7 days. RESULTS The patients in the LLLT group had lower mean scores for oral pain and intensity of pain on the most painful day. Also, their pain ended sooner. LLLT did not affect the start of pain perception or alter the most painful day. There was no significant difference in pain symptomatology in the maxillary or mandibular arches in an evaluated parameter. CONCLUSIONS Based on these findings, we concluded that LLLT efficiently controls pain caused by the first archwire.

An in vitro comparison of the force decay generated by different commercially available elastomeric chains and NiTi closed coil springs

This in vitro study was designed to compare the forces generated by commercially available elastomeric chains and NiTi closed coil springs, and to determine their force decay pattern. Forty elastomeric chains and forty NiTi closed coil springs were divided into 4 groups according to the following manufacturers: (1) Morelli, (2) Abzil, (3) TP Orthodontics and (4) American Orthodontics. The specimens were extended to twice their original length and stored in artificial saliva at 37 degrees C. Initial force was measured by means of an Instron universal testing machine and then at 1, 4, 7, 14, 21, and 28 days. The results revealed that the elastomeric chains delivered a mean initial force of 347 g for Morelli, 351 g for American Orthodontics, 402 g for Abzil, and 404 g for TP Orthodontics. The NiTi closed coil springs generated a mean initial force of 196 g for American Orthodontics, 208 g for TP Orthodontics, 216 g for Abzil, and 223 g for Morelli. The mean percentage of force decay observed after 28 days for the elastomeric chains was 37.4% for TP Orthodontics(R), 48.1% for American Orthodontics, 65.4% for Morelli, and 71.6% for Abzil. After 28 days, the NiTi closed coil springs presented a mean percentage of force decay of 22.6% for American Orthodontics, 29.8% for Abzil, 30.6% for Morelli, and 45.8% for TP Orthodontics. At the end of the study, significant differences were observed between the elastomeric chains and the NiTi closed coil springs. The results indicated that the studied NiTi closed coil springs are more adequate for dental movement than the elastomeric chains.

Microflora associated with successful and failed orthodontic mini‐implants

OBJECTIVES Mini-implants are used for orthodontic bone anchorage. The reasons for a potential instability or loss of the mini-implants during treatment are multiple. Among other factors, colonization of implants with pathogenic bacteria is discussed. Therefore, the microflora associated with successful and failed mini-implants has been screened. MATERIAL AND METHODS A total of 76 mini-implants collected from 25 patients were observed during regular orthodontic treatment. Bacterial samples of eight failed and - exemplarily - four successful (control) cases were subjected to a universal Bacteria-directed real-time quantitative polymerase chain reaction for quantification in combination with a microarray-based identification of 20 selected species. RESULTS The failure rate in the present investigation was 10.5%. The bacterial analysis did not reveal any major difference in the total amount or species composition between control and failed mini-implants. However, Actinomyces viscosus was found in four (100%) and Campylobacter gracilis in three (75%) stable controls, whereas both species were rarely found (12.5%) in failed implants. CONCLUSIONS In the present study, the peri-implant sulcus surrounding failed orthodontic mini-implants did not show a specific aggressive bacterial flora.

Periodontopathogens around the surface of mini-implants removed from orthodontic patients

OBJECTIVE To verify if mini-implant mobility is affected by the presence of periodontopathogens, frequently associated with peri-implantitis. MATERIALS AND METHODS The surfaces of 31 mini-implants used for skeletal anchorage in orthodontic patients were evaluated. Polymerase chain reaction was used for identification of the presence of DNA from three different periodontopathogens ( P. intermedia [ Pi ], A. actinomycetemcomitans [ Aa ], and P. gingivalis [ Pg ]) in 16 mini-implants without mobility (control group) and 15 mini-implants with mobility (experimental group). RESULTS The results showed that Pi was present in 100% of the samples, from both groups: Aa was found in 31.3% of the control group and in 13.3% of the experimental group. Pg was detected in 37.4% of the control group and in 33.3% of the experimental group. The Fisher exact test and the odds ratio (OR) values for Aa and Pg (OR  =  0.34; 95% confidence interval [CI]: 0.05-2.10 and OR  =  0.61; 95% CI: 0.13-2.79, respectively) showed no significant association (P > .05) between the periodontopathogens studied and the mobility of the mini-implants. CONCLUSIONS It can be concluded that the presence of Aa , Pi , and Pg around mini-implants is not associated with mobility.

Frictional resistance in monocrystalline ceramic brackets with conventional and nonconventional elastomeric ligatures

BackgroundThe objective of this study was to compare the frictional forces generated by three types of monocrystalline ceramic brackets coupled with conventional elastomeric ligatures (CEL) and nonconventional elastomeric ligatures (NCEL) during the alignment of apically displaced teeth at the maxillary arch.MethodsAll tests (a total of 480 tests) were carried out in a dry state on a universal testing machine with a testing model consisting of three 0.022-in. monocrystalline ceramic preadjusted brackets (from the maxillary right second premolar through the right central incisor). The canine bracket was bonded to a sliding bar that allowed for different vertical positions. The frictional forces generated by a 0.012- and 0.014-in. superelastic nickel titanium wire (SENT) with conventional and nonconventional ligatures at various amounts of canine misalignment (1.5, 3.0, 4.5, and 6.0 mm) were recorded. Comparisons between the different types of bracket-wire-ligature systems were carried out by means of analysis of variance on ranks with Tukeys post hoc test (P < 0.05).ResultsNo significant differences were assessed among the three types of monocrystalline brackets with NCEL when coupled with 0.012-in. SENT. Radiance brackets with NCEL coupled with 0.014-in. SENT showed significantly greater frictional force than Inspire Ice brackets and Pure brackets with NCEL. A significantly greater amount of frictional force was generated with CEL when compared with NCEL for all the tested variables, with the exception of the Pure brackets with 0.012-in. SENT at 1.5 and 3.0 mm of canine misalignment where similar frictional forces were found.ConclusionsNonconventional elastomeric ligatures are able to reduce friction in monocrystalline ceramic brackets.

Applicability of Moyers analysis in mixed dentition: A systematic review

INTRODUCTION Moyers analysis is widely used for analyzing mixed dentition, however, the accuracy of its theoretical probability tables has been recently questioned. Taking into consideration the fact the mixed dentition analysis is of paramount importance to precisely determine the space needed for alignment of canines and premolars, this research aimed at objectively assessing in the literature such an important step for orthodontic diagnosis. METHODS A computerized search involving articles published on PubMed and Lilacs between 1990 and September, 2011 was conducted in accordance with the method described in the Cochrane 5.1.0 handbook. RESULTS The research resulted in a sample composed of 629 articles. The inclusion criteria were: Articles using the Moyers analysis with a sample greater or equal to 40 patients. Conversely, the exclusion criteria were: Dental casts of patients with syndromes or oral cleft, researches conducted with a literature review, only, or clinical case reports and researches conducted before 1990. For this systematic review, 19 articles were selected. CONCLUSIONS Based on the literature available, we can conclude that Moyers mixed dentition analysis must be carefully used, since the majority of the articles analyzed showed that the probability of 75% was not as accurate as expected, leading to the need of adapting the probability levels depending on the study population.

Effects of active and passive lacebacks on antero-posterior position of maxillary first molars and central incisors

The purpose of this study was to compare the effects of active and passive lacebacks on antero-posterior position of maxillary first molars and central incisors during leveling phase. Twenty-three subjects with Class I and Class II malocclusion were treated with first premolars extraction using preadjusted appliances (MBT 0.022-inch brackets). The leveling phase was performed with stainless steel archwires only. The sample was divided into 2 groups: 14 subjects received active lacebacks (Group 1) and 9 subjects received passive lacebacks (Group 2). Lacebacks were made from 0.008-inch ligature wire. Lateral cephalometric radiographs were taken pre- and post-leveling phase. Students t-test was applied to determine the differences between pre- and post-leveling mean values and to determine the mean differences between groups. In Group I, the first molars showed a significant mesial movement, whereas no change was observed in Group 2. In both groups, maxillary central incisor crowns moved to lingual side. In conclusion, active laceback produced anchorage loss of maxillary first molars whereas passive laceback did not affect the position of these teeth. Active and passive lacebacks were effective in preventing central incisor proclination.

Avaliação in vitro da resistência à flexão de um protótipo de mini-implante desenvolvido para ancoragem do aparelho de Herbst

Aim: The purpose of this study was to evaluate the limit of flexural strength of a miniimplant prototype designed for Herbst appliance anchorage. Methods: After sample size calculation, four specimens with the new mini-implant were submitted to a single cantilever flexure test using a universal testing machine. The limit of flexural force strength was calculated. Results: The mini-implant prototype showed a limit of flexural force strength of 98.2 kgf (982 N), that was the lowest value found. Conclusion: The mini-implant prototype designed for Herbst appliance anchorage can withstand flexural forces higher than the maximum human bite forces reported in the literature.

Influence of different methods of cleaning custom bases on the shear bond strength of indirectly bonded brackets

Objective To determine the influence on shear bond strength and bond failure location of four cleaning methods for orthodontic bracket custom bases. Design In vitro laboratory study. Material and methods Eighty bovine teeth were divided at random into four groups. The bracket custom bases were cleaned with different methods: group 1 with methyl methacrylate monomer, group 2 with acetone, group 3 with 50 μm aluminium oxide particles and group 4 with detergent. The brackets were indirectly bonded onto the teeth with the Sondhi Rapid-Set self-curing adhesive. The maximum required shear bond strength to debond the brackets was recorded. The bond failure location was evaluated using the Adhesive Remnant Index (ARI). One-way analysis of variance (ANOVA) analysis (P<0·05) was used to detect significant differences in the bond strength. Kaplan–Meier survival plots and log-rank test were done to compare the survival distribution between the groups. The Kruskal–Wallis test (P<0·05) was used to evaluate the differences in the ARI scores. Results The mean bond strengths in groups 1, 2, 3 and 4 were 23·7±5·0, 25·3±5·1, 25·6±3·7 and 25·7±4·2 MPa, respectively. There were no significant statistically differences in either the bond strength or the ARI score between the groups. Conclusion The four custom base-cleaning methods presented the same efficiencies on indirect bond of the brackets; thus, practitioners can choose the method that works best for them.