Gladys Cristina Dominguez

Low-level laser therapy for pain caused by placement of the first orthodontic archwire: A randomized clinical trial

INTRODUCTION The purpose of this study was to clinically evaluate the effect of low-level laser therapy (LLLT) as a method of reducing pain reported by patients after placement of their first orthodontic archwires. METHODS The sample comprised 60 orthodontic patients (ages, 12-18 years; mean, 15.9 years). All patients had fixed orthodontic appliances placed in 1 dental arch (maxillary or mandibular), received the first archwire, and were then randomly assigned to the experimental (laser), placebo, or control group. This was a double-blind study. LLLT was started in the experimental group immediately after placement of the first archwire. Each tooth received a dose of 2.5 J per square centimeter on each side (buccal and lingual). The placebo group had the laser probe positioned into the mouth at the same areas overlying the dental root and could hear a sound every 10 seconds. The control group had no laser intervention. All patients received a survey to be filled out at home describing their pain during the next 7 days. RESULTS The patients in the LLLT group had lower mean scores for oral pain and intensity of pain on the most painful day. Also, their pain ended sooner. LLLT did not affect the start of pain perception or alter the most painful day. There was no significant difference in pain symptomatology in the maxillary or mandibular arches in an evaluated parameter. CONCLUSIONS Based on these findings, we concluded that LLLT efficiently controls pain caused by the first archwire.

Increase of condylar displacement between centric relation and maximal habitual intercuspation after occlusal splint therapy

The present study assessed condylar displacement between initial maximal habitual intercuspation (MHI) and centric relation (CR), recorded after using a deprogramming occlusal splint for an average period of 7.8 +/- 2.1 months prior to any orthodontic treatment. The sample consisted of 22 subjects, 11 male and 11 female, with an average age of 14.2 +/- 1.4 years, with Class II malocclusion and with no apparent signs or symptoms of temporomandibular dysfunction (TMD). Condylar displacement was measured using a Panadent axis position indicator in decimal fractions of a millimeter. The original mean vertical displacements and the corresponding standard deviations were 4.24 +/- 2.53 mm and 3.86 +/- 2.72 mm, respectively, for the right and left sides. Because a significant negative correlation was observed between original condylar displacements and age factors, the displacement values were statistically adjusted to 2.74 +/- 2.00 mm and 2.44 +/- 1.93 mm. On the horizontal plane, the mean displacements measured were -0.72 +/- 1.53 mm on the right side and -0.51 +/- 1.98 mm on the left. The mean displacement on the transversal plane was 0.03 +/- 0.87 mm. A comparison between these values and those observed in non-deprogrammed groups, as well as those published in the related literature, indicates that use of occlusal splints results in greater mean condylar displacement values, especially vertically, between CR and MHI positions, which contributed to a more accurate orthodontic diagnosis.

Microflora associated with successful and failed orthodontic mini‐implants

OBJECTIVES Mini-implants are used for orthodontic bone anchorage. The reasons for a potential instability or loss of the mini-implants during treatment are multiple. Among other factors, colonization of implants with pathogenic bacteria is discussed. Therefore, the microflora associated with successful and failed mini-implants has been screened. MATERIAL AND METHODS A total of 76 mini-implants collected from 25 patients were observed during regular orthodontic treatment. Bacterial samples of eight failed and - exemplarily - four successful (control) cases were subjected to a universal Bacteria-directed real-time quantitative polymerase chain reaction for quantification in combination with a microarray-based identification of 20 selected species. RESULTS The failure rate in the present investigation was 10.5%. The bacterial analysis did not reveal any major difference in the total amount or species composition between control and failed mini-implants. However, Actinomyces viscosus was found in four (100%) and Campylobacter gracilis in three (75%) stable controls, whereas both species were rarely found (12.5%) in failed implants. CONCLUSIONS In the present study, the peri-implant sulcus surrounding failed orthodontic mini-implants did not show a specific aggressive bacterial flora.

Periodontopathogens around the surface of mini-implants removed from orthodontic patients

OBJECTIVE To verify if mini-implant mobility is affected by the presence of periodontopathogens, frequently associated with peri-implantitis. MATERIALS AND METHODS The surfaces of 31 mini-implants used for skeletal anchorage in orthodontic patients were evaluated. Polymerase chain reaction was used for identification of the presence of DNA from three different periodontopathogens ( P. intermedia [ Pi ], A. actinomycetemcomitans [ Aa ], and P. gingivalis [ Pg ]) in 16 mini-implants without mobility (control group) and 15 mini-implants with mobility (experimental group). RESULTS The results showed that Pi was present in 100% of the samples, from both groups: Aa was found in 31.3% of the control group and in 13.3% of the experimental group. Pg was detected in 37.4% of the control group and in 33.3% of the experimental group. The Fisher exact test and the odds ratio (OR) values for Aa and Pg (OR  =  0.34; 95% confidence interval [CI]: 0.05-2.10 and OR  =  0.61; 95% CI: 0.13-2.79, respectively) showed no significant association (P > .05) between the periodontopathogens studied and the mobility of the mini-implants. CONCLUSIONS It can be concluded that the presence of Aa , Pi , and Pg around mini-implants is not associated with mobility.

Effects of Herbst appliance treatment on temporomandibular joint disc position and morphology: A prospective magnetic resonance imaging study

INTRODUCTION The objective of this prospective study was to evaluate changes in the position and morphology of the disc in the temporomandibular joint (TMJ) with magnetic resonance imaging (MRI). METHODS The subjects were 32 consecutive adolescent patients with Class II Division 1 malocclusion treated with the Herbst appliance. The MRIs were obtained immediately before treatment (T1), 8 to 10 weeks after appliance placement (T2), and 12 months later (T3). RESULTS Qualitative evaluation of the MRIs showed that, in 42 (65.62%) of the 64 TMJs, the disc was positioned within normal limits at T1. Because of the advancements caused by the Herbst appliance, a tendency for disc retrusion was observed at T2, but at T3 the disc had returned to normal limits. In 22 TMJs (34.37%), the disc was displaced at T1, and no changes were observed at T3. In most subjects, comparison of the morphology of the disc at T1, T2, and, T3 showed no significant change. CONCLUSIONS Herbst therapy does not cause adverse effects on the morphology and position of the articular disc in the short term.

Frictional resistance in monocrystalline ceramic brackets with conventional and nonconventional elastomeric ligatures

BackgroundThe objective of this study was to compare the frictional forces generated by three types of monocrystalline ceramic brackets coupled with conventional elastomeric ligatures (CEL) and nonconventional elastomeric ligatures (NCEL) during the alignment of apically displaced teeth at the maxillary arch.MethodsAll tests (a total of 480 tests) were carried out in a dry state on a universal testing machine with a testing model consisting of three 0.022-in. monocrystalline ceramic preadjusted brackets (from the maxillary right second premolar through the right central incisor). The canine bracket was bonded to a sliding bar that allowed for different vertical positions. The frictional forces generated by a 0.012- and 0.014-in. superelastic nickel titanium wire (SENT) with conventional and nonconventional ligatures at various amounts of canine misalignment (1.5, 3.0, 4.5, and 6.0 mm) were recorded. Comparisons between the different types of bracket-wire-ligature systems were carried out by means of analysis of variance on ranks with Tukeys post hoc test (P < 0.05).ResultsNo significant differences were assessed among the three types of monocrystalline brackets with NCEL when coupled with 0.012-in. SENT. Radiance brackets with NCEL coupled with 0.014-in. SENT showed significantly greater frictional force than Inspire Ice brackets and Pure brackets with NCEL. A significantly greater amount of frictional force was generated with CEL when compared with NCEL for all the tested variables, with the exception of the Pure brackets with 0.012-in. SENT at 1.5 and 3.0 mm of canine misalignment where similar frictional forces were found.ConclusionsNonconventional elastomeric ligatures are able to reduce friction in monocrystalline ceramic brackets.

Applicability of Moyers analysis in mixed dentition: A systematic review

INTRODUCTION Moyers analysis is widely used for analyzing mixed dentition, however, the accuracy of its theoretical probability tables has been recently questioned. Taking into consideration the fact the mixed dentition analysis is of paramount importance to precisely determine the space needed for alignment of canines and premolars, this research aimed at objectively assessing in the literature such an important step for orthodontic diagnosis. METHODS A computerized search involving articles published on PubMed and Lilacs between 1990 and September, 2011 was conducted in accordance with the method described in the Cochrane 5.1.0 handbook. RESULTS The research resulted in a sample composed of 629 articles. The inclusion criteria were: Articles using the Moyers analysis with a sample greater or equal to 40 patients. Conversely, the exclusion criteria were: Dental casts of patients with syndromes or oral cleft, researches conducted with a literature review, only, or clinical case reports and researches conducted before 1990. For this systematic review, 19 articles were selected. CONCLUSIONS Based on the literature available, we can conclude that Moyers mixed dentition analysis must be carefully used, since the majority of the articles analyzed showed that the probability of 75% was not as accurate as expected, leading to the need of adapting the probability levels depending on the study population.

Morphological Changes of Condyles and Helkimo Clinical Dysfunction Index in Patients Treated with Herbst - Orthodontic Appliance

This study evaluated the morphological changes in the temporomandibular joint (TMJ) condyles and calculated the Helkimo clinical dysfunction index (CDI) in adolescents with Class II Division 1 malocclusion and mandibular retrognathism treated with the Herbst appliance (phase I) and fixed orthodontic appliances (phase II). Thirty-two consecutive adolescents underwent phase I, and 23 completed phase II. The TMJs were evaluated qualitatively using magnetic resonance imaging (MRI) at the beginning of treatment (T1), during phase I (T2), at the end of phase I (T3) and at the end of phase II (T4). The CDI was calculated at T1, T3 and T4. From T1 to T3 (p=0.326), there were no changes in condyle morphology in 86.0% of the TMJs. From T3 to T4 (p<0.05) and T1 to T4 (p<0.05), changes occurred in 39.1% and 43.4% of the condyles. No significant changes in CDI occurred from T1 to T3, T3 to T4 and T1 to T4 (p=1.000; 86.6%, 76.2% and 76.2% concordance). After phase I, there were practically no changes in condyle morphology. At the end of phase II, a mild flattening was observed in some condyles. It may be concluded that no significant changes occurred in CDI after both treatment phases.

Unusual Spontaneous Mandibular Regeneration of a Large Defect Followed by Orthodontics, Alveolar Distraction, and Dental Implant Rehabilitation: A 10-Year Follow-Up

This report describes an atypical case of spontaneous mandibular regeneration of a large size bony defect after resection of an aseptic osteonecrotic area near the symphysis and parasymphyseal area. The patient underwent orthodontic therapy, vertical osteogenic distraction of the alveolar bone, and oral rehabilitation with an implant borne prosthesis. This case study also describes the 10-year follow-up of comprehensive multidisciplinary treatment and successful recovery of a patients esthetic and functional aspects.

Effect of adhesion boosters on indirect bracket bonding

OBJECTIVE To determine the influence of two adhesion boosters on shear bond strength and on the bond failure location of indirectly bonded brackets. MATERIALS AND METHODS Sixty bovine incisors were randomly divided into three groups (n = 20), and their buccal faces were etched using 37% phosphoric acid. In group 1 (control), brackets were indirectly bonded using only Sondhi adhesive. In groups 2 and 3, the adhesion boosters Enhance Adhesion Booster and Assure Universal Bonding Resin, respectively, were applied before bonding with Sondhi. Maximum bond strength was measured with a universal testing machine, and the location of bond failure was evaluated using the Adhesive Remnant Index (ARI). One-way analysis of variance followed by the Tukey test (P < .05) was used to compare the shear bond strength among groups, and the differences in ARI scores were evaluated using the Kruskal-Wallis test (P < .05). The Pearson correlation coefficient was calculated to determine whether there was any correlation between bond strength and ARI scores. RESULTS The mean shear bond strength in group 3 was significantly higher (P < .01) than in the other groups. Evaluation of the locations of bond failure revealed differences (P < .05) among the three groups. There was a moderate correlation between bond strength and ARI scores within group 3 (r  =  0.5860, P < .01). CONCLUSION In vitro shear bond strength was acceptable in all groups. The use of the Assure adhesion booster significantly increased both the shear bond strength of indirectly bonded brackets and the amount of adhesive that remained on the enamel after bracket debonding.