Andreas Janshoff

Piezoelectric Mass‐Sensing Devices as Biosensors—An Alternative to Optical Biosensors?

In the early days of electronic communication-as a result of the limited number of quartz resonators available-frequency adjustment was accomplished by a pencil mark depositing a foreign mass layer on the crystal. In 1959, Sauerbrey showed that the shift in resonance frequency of thickness-shear-mode resonators is proportional to the deposited mass. This was the starting point for the development of a new generation of piezoelectric mass-sensitive devices. However, it was the development of new powerful oscillator circuits that were capable of operating thickness shear mode resonators in fluids that enabled this technique to be introduced into bioanalytic applications. In the last decade adsorption of biomolecules on functionalized surfaces turned in to one of the paramount applications of piezoelectric transducers. These applications include the study of the interaction of DNA and RNA with complementary strands, specific recognition of protein ligands by immobilized receptors, the detection of virus capsids, bacteria, mammalian cells, and last but not least the development of complete immunosensors. Piezoelectric transducers allow a label-free detection of molecules; they are more than mere mass sensors since the sensor response is also influenced by interfacial phenomena, viscoelastic properties of the adhered biomaterial, surface charges of adsorbed molecules, and surface roughness. These new insights have recently been used to investigate the adhesion of cells, liposomes, and proteins onto surfaces, thus allowing the determination of the morphological changes of cells as a response to pharmacological substances and changes in the water content of biopolymers without employing labor-intense techniques. However, the future will show whether the quartz-crystal microbalance will assert itself against established label-free sensor devices such as surface plasmon resonance spectroscopy and interferometry.

Impedance analysis of supported lipid bilayer membranes: a scrutiny of different preparation techniques

One topic of this study is the comparison of different preparation techniques to build up solid supported lipid bilayers onto gold substrates. The deposited lipid bilayers were investigated by a.c. impedance spectroscopy. Three different strategies were applied: (1) The gold surface was initially covered with a chemisorbed monolayer of octadecanethiol or 1,2-dimyristoyl-sn-glycero-3-phosphothioethanol (DMPTE). The second monolayer consisting of phospholipids was then deposited onto this hydrophobic surface by (i) the Langmuir-Schaefer-technique, (ii) from lipid solution in n-decane/isobutanol, (iii) by the lipid/detergent dilution technique or (iv) by fusion of vesicles. (2) Charged molecules carrying thiol-anchors for attachment to the gold surface by chemisorption were used. Negatively charged surfaces of 3-mercaptopropionic acid were found to be excellent substrates that allow the attachment of planar lipid bilayers by applying positively charged dimethyldioctadecylammoniumbromide (DODAB) vesicles or negatively charged 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol vesicles in the presence of chelating Ca2+-ions. If positively charged first monolayers of mercaptoethylammoniumhydrochloride were used we were able to attach mixed 1,2-dimyristoyl-sn-glycero-3-phosphoglycerol/1,2-dimyristoyl-sn-glycero- 3-phosphoethanolamine vesicles to form planar lipid bilayers via electrostatic interaction. (3) Direct deposition of lipid bilayers is possible from vesicles containing 1,2-dimyristoyl-sn-glycero-3-phosphothioethanol (DMPTE). A critical amount of more than 50 mol% of DMPTE was found to be necessary to form a solid supported lipid bilayer. Bilayers obtained with these different preparation techniques were scrutinized with respect to their capacitances, kinetics of formation and their long-term stabilities by impedance spectroscopy. The second feature of this paper is the application of the supported bilayers to study ion transport through channel-forming peptides. We used a DODAB-bilayer for the reconstitution of gramicidin D channels. By circular dichroism measurements we verified that the peptide is in its channel conformation. The ion transport of Cs+-ions through the channels was recorded by impedance analysis.

Cell adhesion monitoring using a quartz crystal microbalance: comparative analysis of different mammalian cell lines

Abstract The quartz crystal microbalance (QCM) has been widely accepted as a sensitive technique to follow adsorption processes in gas as well as in liquid environments. However, there are only a few reports about the use of this technique to monitor the attachment and spreading of mammalian cells onto a solid support in culture. Using a QCM-setup we investigated the time course of cell attachment and spreading as a function of seeding density for three widespread and frequently used cell lines (MDCK strains I and II and Swiss 3T3-fibroblasts). Results were found to be in good agreement with the geometrical properties of the individual cell types. The shifts of the resonance frequency associated with confluent cell layers on top of the quartz resonators were found to be dependent on the cell species [MDCK-I: (320±20) Hz; MDCK-II: (530±25) Hz; 3T3: (240±15) Hz] reflecting their individual influence on the shear oscillation of the resonator. These findings are discussed with respect to the basic models of materials in contact with an oscillating quartz resonator. We furthermore showed by inhibition-assays using soluble RGD-related peptides, that only specific, integrin mediated cell adhesion is detected using this QCM approach, whereas the sole presence of the cellular body in close vicinity to the resonator surface is barely detectable.

Toxicity of gold-nanoparticles: Synergistic effects of shape and surface functionalization on micromotility of epithelial cells

Abstract Nanoparticle exposure is monitored by a combination of two label-free and non-invasive biosensor devices which detect cellular shape and viscoelasticity (quartz crystal microbalance), cell motility and the dynamics of epithelial cell-cell contacts (electric cell-substrate impedance sensing). With these tools we have studied the impact of nanoparticle shape on cellular physiology. Gold (Au) nanoparticles coated with CTAB were synthesized and studied in two distinct shapes: Spheres with a diameter of (43 ± 4) nm and rods with a size of (38 ± 7) nm × (17 ± 3) nm. Dose-response experiments were accompanied by conventional cytotoxicity tests as well as fluorescence and dark-field microscopy to visualize the intracellular particle distribution. We found that spherical gold nanoparticles with identical surface functionalization are generally more toxic and more efficiently ingested than rod-shaped particles. We largely attribute the higher toxicity of CTAB-coated spheres as compared to rod-shaped particles to a higher release of toxic CTAB upon intracellular aggregation.

Myelin Membrane Assembly Is Driven by a Phase Transition of Myelin Basic Proteins Into a Cohesive Protein Meshwork

Myelin basic protein undergoes a phase transition from a cytoplasmic soluble pool into a cohesive functional amyloid-like assembly; this may be one mechanism of myelin membrane biogenesis.

From Defined Reactive Diblock Copolymers to Functional HPMA-Based Self-Assembled Nanoaggregates

This paper describes the synthesis of functional amphiphilic poly( N-(2-hydroxypropyl) methacrylamide)-block-poly(lauryl methacrylate) copolymers by RAFT polymerization via the intermediate step of activated ester block copolymers (pentafluoro-phenyl methacrylate). Block copolymers with molecular weights from 12000-28000 g/mol and PDIs of about 1.2 have been obtained. The amphiphilic diblock copolymers form stable super structures (nanoaggregates) by self-organization in aqueous solution. The diameters of these particles are between 100 and 200 nm and depend directly on the molecular weight of the block copolymer. Furthermore, we investigated the impact of these nanoaggregates on cell viability and on the motility of adherent cells. Cytotoxicity was investigated by the MTS test and the fluctuation in cell shape was monitored employing ECIS (electrical cell-substrate impedance sensing). In these investigations, the formed particles are not cell toxic up to a concentration of 2 mg/mL. Thus, our polymeric particles offer potential as polymer therapeutics.

The quartz crystal microbalance as a novel means to study cell-substrate interactions In situ

The quartz crystal microbalance (QCM) was first introduced as a mass sensor in gas phase and in vacuum. Since oscillator circuits capable of exciting shear vibrations of quartz resonators under liquid loading have been developed, the QCM became accepted as a new, powerful technique to follow adsorption processes at solid-liquid interfaces in chemical and biological research. Lately, the QCM technique has attracted considerable interest as a novel means to monitor cell-substrate interactions of mammalian cells in vitro. Because the establishment and modulation of cell-substrate contacts is important for many physiological processes, and potent techniques to measure these interactions noninvasively are rare, the present review highlights applications of the QCM technique in this field. The suitability of the QCM device to monitor attachment and spreading of mammalian cells in real time has been well established. The QCM response is dependent on the individual cell type that is examined. In order to identify the sources for these cell-type-specific results of QCM readings, and to understand the information content of the signal, attempts have been made to decompose the overall QCM response into subcellular contributions. The aforementioned subjects, together with a condensed introduction into the QCM technology, are included in this article.

Protein-Membrane Interaction Probed by Single Plasmonic Nanoparticles

We present a nanosized and addressable sensor platform based on membrane coated plasmonic particles and show unequivocally the covering with lipid bilayers as well as the subsequent detection of streptavidin binding to biotinylated lipids. The binding is detected on membrane covered gold nanorods by monitoring the spectral shift by fast single particle spectroscopy (fastSPS) on many particles in parallel. Our approach allows for local analysis of protein interaction with biological membranes as a function of the lateral composition of phase separated membranes.

Structural and functional characterization of the two phosphoinositide binding sites of PROPPINs, a β-propeller protein family

β-propellers that bind polyphosphoinositides (PROPPINs), a eukaryotic WD-40 motif-containing protein family, bind via their predicted β-propeller fold the polyphosphoinositides PtdIns3P and PtdIns(3,5)P2 using a conserved FRRG motif. PROPPINs play a key role in macroautophagy in addition to other functions. We present the 3.0-Å crystal structure of Kluyveromyces lactis Hsv2, which shares significant sequence homologies with its three Saccharomyces cerevisiae homologs Atg18, Atg21, and Hsv2. It adopts a seven-bladed β-propeller fold with a rare nonvelcro propeller closure. Remarkably, in the crystal structure, the two arginines of the FRRG motif are part of two distinct basic pockets formed by a set of highly conserved residues. In comprehensive in vivo and in vitro studies of ScAtg18 and ScHsv2, we define within the two pockets a set of conserved residues essential for normal membrane association, phosphoinositide binding, and biological activities. Our experiments show that PROPPINs contain two individual phosphoinositide binding sites. Based on docking studies, we propose a model for phosphoinositide binding of PROPPINs.

Specific Adhesion of Vesicles Monitored by Scanning Force Microscopy and Quartz Crystal Microbalance

The specific adhesion of unilamellar vesicles with an average diameter of 100 nm on functionalized surfaces mediated by molecular recognition was investigated in detail. Two complementary techniques, scanning force microscopy (SFM) and quartz crystal microbalance (QCM) were used to study adhesion of liposomes consisting of 1, 2-dipalmitoyl-sn-glycero-3-phosphocholine and varying concentrations of N-((6-biotinoyl)amino)hexanoyl)-1, 2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (biotin-X-DHPE). Monitoring the adhesion of the receptor-doped vesicles to avidin-coated gold surfaces by QCM (f(0) = 5 MHz) revealed an increased shift in resonance frequency with increasing biotin concentration up to 10 mol% biotin-X-DHPE. To address the question of how the morphology of the liposomes changes upon adhesion and how that contributes to the resonators frequency response, we performed a detailed analysis of the liposome morphology by SFM. We found that, with increasing biotin-concentration, the height of the liposomes decreases considerably up to the point where vesicle rupture occurs. Thus, we conclude that the unexpected high frequency shifts of the quartz crystal (>500 Hz) can be attributed to a firm attachment of the spread bilayers, in which the number of contacts is responsible for the signal. These findings are compared with one of our recent studies on cell adhesion monitored by QCM.