Andris Kleinhofs

A molecular, isozyme and morphological map of the barley (Hordeum vulgare) genome

A map of the barley genome consisting of 295 loci was constructed. These loci include 152 cDNA restriction fragment length polymorphism (RFLP), 114 genomic DNA RFLP, 14 random amplified polymorphic DNA (RAPD), five isozyme, two morphological, one disease resistance and seven specific amplicon polymorphism (SAP) markers. The RFLP-identified loci include 63 that were detected using cloned known function genes as probes. The map covers 1,250 centiMorgans (cM) with a 4.2 cM average distance between markers. The genetic lengths of the chromosomes range from 124 to 223 cM and are in approximate agreement with their physical lengths. The centromeres were localized to within a few markers on all of the barley chromosomes except chromosome 5. Telomeric regions were mapped for the short (plus) arms of chromosomes 1, 2 and 3 and the long (minus) arm of chromosomes 7.

Quantitative trait locus effects and environmental interaction in a sample of North American barley germ plasm

Quantitative trait locus (QTL) and QTL x environment (E) interaction effects for agronomic and malting quality traits were measured using a 123-point linkage map and multi-environment phenotype data from an F1-derived doubled haploid population of barley (Hordeum vulgare). The QTL × E interactions were due to differences in magnitude of QTL effects. Highly significant QTL effects were found for all traits at multiple sites in the genome. Yield QTL peaks and support intervals often coincided with plant height and lodging QTL peaks and support intervals. QTL were detected in the vicinity of a previously mapped Mendelian maturity locus and known function probes forα- andβ-amylase genes. The average map density (9.6 cM) should be adequate for molecular marker-assisted selection, particularly since there were few cases of alternative favorable alleles for different traits mapping to the same or adjacent intervals.

The barley stem rust-resistance gene Rpg1 is a novel disease-resistance gene with homology to receptor kinases.

Stem rust caused by Puccinia graminis f. sp. tritici was among the most devastating diseases of barley in the northern Great Plains of the U.S. and Canada before the deployment of the stem rust-resistance gene Rpg1 in 1942. Since then, Rpg1 has provided durable protection against stem rust losses in widely grown barley cultivars (cvs.). Extensive efforts to clone Rpg1 by synteny with rice provided excellent flanking markers but failed to yield the gene because it does not seem to exist in rice. Here we report the map-based cloning and characterization of Rpg1. A high-resolution genetic map constructed with 8,518 gametes and a 330-kb bacterial artificial chromosome contig physical map positioned the gene between two crossovers ≈0.21 centimorgan and 110 kb apart. The region including Rpg1 was searched for potential candidate genes by sequencing low-copy probes. Two receptor kinase-like genes were identified. The candidate gene alleles were sequenced from resistant and susceptible cvs. Only one of the candidate genes showed a pattern of apparently functional gene structure in the resistant cvs. and defective gene structure in the susceptible cvs. identifying it as the Rpg1 gene. Rpg1 encodes a receptor kinase-like protein with two tandem protein kinase domains, a novel structure for a plant disease-resistance gene. Thus, it may represent a new class of plant resistance genes.

A New Resource for Cereal Genomics: 22K Barley GeneChip Comes of Age

In recent years, access to complete genomic sequences, coupled with rapidly accumulating data related to RNA and protein expression patterns, has made it possible to determine comprehensively how genes contribute to complex phenotypes. However, for major crop plants, publicly available, standard platforms for parallel expression analysis have been limited. We report the conception and design of the new publicly available, 22K Barley1 GeneChip probe array, a model for plants without a fully sequenced genome. Array content was derived from worldwide contribution of 350,000 high-quality ESTs from 84 cDNA libraries, in addition to 1,145 barley (Hordeum vulgare) gene sequences from the National Center for Biotechnology Information nonredundant database. Conserved sequences expressed in seedlings of wheat (Triticum aestivum), oat (Avena strigosa), rice (Oryza sativa), sorghum (Sorghum bicolor), and maize (Zea mays) were identified that will be valuable in the design of arrays across grasses. To enhance the usability of the data, BarleyBase, a MIAME-compliant, MySQL relational database, serves as a public repository for raw and normalized expression data from the Barley1 GeneChip probe array. Interconnecting links with PlantGDB and Gramene allow BarleyBase users to perform gene predictions using the 21,439 non-redundant Barley1 exemplar sequences or cross-species comparison at the genome level, respectively. We expect that this first generation array will accelerate hypothesis generation and gene discovery in disease defense pathways, responses to abiotic stresses, development, and evolutionary diversity in monocot plants.

QTL analysis of malting quality in barley based on the doubled-haploid progeny of two elite North American varieties representing different germplasm groups

Abstract Characterization of the determinants of economically important phenotypes showing complex inheritance should lead to the more effective use of genetic resources. This study was conducted to determine the number, genome location and effects of QTLs determining malting quality in the two North American barley quality standards. Using a doubled-haploid population of 140 lines from the cross of Harrington×Morex, malting quality phenotype data sets from eight environments, and a 107-marker linkage map, QTL analyses were performed using simple interval mapping and simplified composite interval mapping procedures. Seventeen QTLs were associated with seven grain and malting quality traits (percentage of plump kernels, test weight, grain protein percentage, soluble/total protein ratio, α-amylase activity, diastatic power and malt-extract percentage). QTLs for multiple traits were coincident. The loci controlling inflorescence type [vrs1 on chromosome 2(2H) and int-c on chromosome 4(4H)] were coincident with QTLs affecting all traits except malt-extract percentage. The largest effect QTLs, for the percentage of plump kernels, test weight protein percentage, S/T ratio and diastatic power, were coincident with the vrs1 locus. QTL analyses were conducted separately for each sub-population (six-rowed and two-rowed). Eleven new QTLs were detected in the subpopulations. There were significant interactions between the vrs1 and int-c loci for grain-protein percentage and S/T protein ratio. Results suggest that this mating of two different germplasm groups caused a disruption of the balance of traits. Information on the number, position and effects of QTLs determining components of malting quality may be useful for maintaining specific allele configurations that determine target quality profiles.

A bacterial artificial chromosome library for barley (Hordeum vulgare L.) and the identification of clones containing putative resistance genes

Abstract Modern cultivated barley is an important cereal crop with an estimated genome size of 5000 Mb. To develop the resources for positional cloning and structural genomic analyses in barley, we constructed a bacterial artificial chromosome (BAC) library for the cultivar Morex using the cloning enzyme HindIII. The library contains 313344 clones (816 384-well plates). A random sampling of 504 clones indicated an average insert size of 106 kbp (range=30–195 kbp) and 3.4% empty vectors. Screening the colony filters for chloroplast DNA content indicated an exceptionally low 1.5% contamination with chloroplast DNA. Thus, the library provides 6.3 haploid genome equivalents allowing a >99% probability of recovering any specific sequence of interest. High-density filters were gridded robotically using a Genetix Q-BOT in a 4×4 double-spotted array on 22.5-cm2 filters. Each set of 17 filters allows the entire library to be screened with 18432 clones represented per filter. Screening the library with 40 single copy probes identified an average 6.4 clones per probe, with a range of 1–13 clones per probe. A set of resistance-gene analog (RGA) sequences identified 121 RGA-containing BAC clones representing 20 different regions of the genome with an average of 6.1 clones per locus. Additional screening of the library with a P-loop disease resistance primer probe identified 459 positive BAC clones. These data indicate that this library is a valuable resource for structural genomic applications in barley.

Genetics of seedling and adult plant resistance to net blotch (Pyrenophora teres f. teres) and spot blotch (Cochliobolus sativus) in barley.

Net blotch (caused by Pyrenophora teres f. teres) and spot blotch (Cochliobolus sativus) are important foliar diseases of barley in the midwestern region of the USA. To determine the number and chromosomal location of Mendelian and quantitative trait loci (QTL) controlling resistance to these diseases, a doubled haploid population (‘Steptoe’/‘Morex’) was evaluated to the pathogens at the seedling stage in the greenhouse and at the adult plant stage in the field. Alleles at two or three unlinked loci were found to confer resistance to the net blotch pathogen at the seedling stage depending on how progeny exhibiting an intermediate infection response were classified. This result was corroborated in the quantitative analysis of the raw infection response data as 2 major QTL were identified on chromosomes 4 and 6M. A third QTL was also identified on chromosome 6P. Seven QTL were identified for net blotch resistance at the adult plant stage and mapped to chromosomes 1P, 2P, 3P, 3M, 4, 6P, and 7P. The 7 QTL collectively accounted for 67.6% of the phenotypic variance under a multiple QTL model. Resistance to the spot blotch pathogen was conferred by a single gene at the seedling stage. This gene was mapped to the distal region of chromosome 1P on the basis of both qualitative and quantitative data analyses. Two QTL were identified for spot blotch resistance at the adult plant stage: the largest QTL effect mapped to chromosome 5P and the other mapped to chromosome 1P near the seedling resistance locus. Together, the 2 QTL explained 70.1% of the phenotypic variance under a multiple QTL model. On the basis of the chromosomal locations of resistance alleles detected in this study, it should be feasible to combine high levels of resistance to both P. teres f. teres and C. sativus in barley cultivars.

Molecular mapping of the Oregon Wolfe Barleys: a phenotypically polymorphic doubled-haploid population

Abstract A phenotypically polymorphic barley (Hordeum vulgare L.) mapping population was developed using morphological marker stocks as parents. Ninety-four doubled-haploid lines were derived for genetic mapping from an F1 using the Hordeum bulbosum system. A linkage map was constructed using 12 morphological markers, 87 restriction fragment length polymorphism (RFLP), five random amplified polymorphic DNA (RAPD), one sequence-tagged site (STS), one intron fragment length polymorphism (IFLP), 33 simple sequence repeat (SSR), and 586 amplified fragment length polymorphism (AFLP) markers. The genetic map spanned 1,387 cM with an average density of one marker every 1.9 cM. AFLP markers tended to cluster on centromeric regions and were more abundant on chromosome 1 (7H). RAPD markers showed a high level of segregation distortion, 54% compared with the 26% observed for AFLP markers, 27% for SSR markers, and 18% for RFLP markers. Three major regions of segregation distortion, based on RFLP and morphological markers, were located on chromosomes 2 (2H), 3 (3H), and 7 (5H). Segregation distortion may indicate that preferential gametic selection occurred during the development of the doubled-haploid lines. This may be due to the extreme phenotypes determined by alleles at morphological trait loci of the dominant and recessive parental stocks. Several molecular markers were found to be closely linked to morphological loci. The linkage map reported herein will be useful in integrating data on quantitative traits with morphological variants and should aid in map-based cloning of genes controlling morphological traits.

An atlas of gene expression from seed to seed through barley development.

Assaying relative and absolute levels of gene expression in a diverse series of tissues is a central step in the process of characterizing gene function and a necessary component of almost all publications describing individual genes or gene family members. However, throughout the literature, such studies lack consistency in genotype, tissues analyzed, and growth conditions applied, and, as a result, the body of information that is currently assembled is fragmented and difficult to compare between different studies. The development of a comprehensive platform for assaying gene expression that is available to the entire research community provides a major opportunity to assess whole biological systems in a single experiment. It also integrates detailed knowledge and information on individual genes into a unified framework that provides both context and resource to explore their contributions in a broader biological system. We have established a data set that describes the expression of 21,439 barley genes in 15 tissues sampled throughout the development of the barley cv. Morex grown under highly controlled conditions. Rather than attempting to address a specific biological question, our experiment was designed to provide a reference gene expression data set for barley researchers; a gene expression atlas and a comparative data set for those investigating genes or regulatory networks in other plant species. In this paper we describe the tissues sampled and their transcriptomes, and provide summary information on genes that are either specifically expressed in certain tissues or show correlated expression patterns across all 15 tissue samples. Using specific examples and an online tutorial, we describe how the data set can be interrogated for patterns and levels of barley gene expression and how the resulting information can be used to generate and/or test specific biological hypotheses.

Does function follow form? Principal QTLs for Fusarium head blight (FHB) resistance are coincident with QTLs for inflorescence traits and plant height in a doubled-haploid population of barley

Abstract Fusarium head blight (FHB), an important disease of barley in many areas of the world, causes losses in grain yield and quality. Deoxynivalenol (DON) mycotoxin residues, produced by the primary pathogen Fusarium graminearum, pose potential health risks. Barley producers may not be able to profitably market FHB-infected barley, even though it has a low DON level. Three types of FHB resistance have been described in wheat: Type I (penetration), Type II (spread), and Type III (mycotoxin degradation). We describe putative measures of these three types of resistance in barley. In wheat, the three resistance mechanisms show quantitative inheritance. Accordingly, to study FHB resistance in barley, we used quantitative trait locus (QTL) mapping to determine the number, genome location, and effects of QTLs associated with Type-I and -II resistance and the concentration of DON in the grain. We also mapped QTLs for plant height, heading date, and morphological attributes of the inflorescence (seeds per inflorescence, inflorescence density, and lateral floret size). QTL analyses were based on a mapping population of F1-derived doubled-haploid (DH) lines from the cross of the two-rowed genotypes Gobernadora and CMB643, a linkage map constructed with RFLP marker loci, and field evaluations of the three types of FHB resistance performed in China, Mexico, and two environments in North Dakota, USA. Resistance QTLs were detected in six of the seven linkage groups. Alternate favorable alleles were found at the same loci when different inoculation techniques were used to measure Type-I resistance. The largest-effect resistance QTL (for Type-II resistance) was mapped in the centromeric region of chromosome 2. All but two of the resistance QTLs coincided with QTLs determining morphological attributes of the inflorescence and/or plant height. Additional experiments are needed to determine if these coincident QTLs are due to linkage or pleiotropy and to more clearly define the biological basis of the FHB resistance QTLs. Plant architecture should be considered in FHB resistance breeding efforts, particularly those directed at resistance QTL introgression and/or pyramiding.