Andrzej Jarmoluk

Study on Alginate–Chitosan Complex Formed with Different Polymers Ratio

Biomaterials based on polyelectrolyte complexation are an innovative concept of coatings and packaging production to be applied in a wide range of food products. The aim of this study was to obtain and characterize a sodium alginate–chitosan complex material with variable degree of polyion interactions by complexation of oppositely charged polysaccharides. In order to characterize polyelectrolyte complexes, theromogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), matrix-assisted laser desorption/ionization technique with time of flight analyzer (MALDI-TOF), and scanning electron microscopy (SEM) were performed. TGA analysis showed that thermal decomposition temperature depends on the polymer ratio (R) and thermal resistance of samples was improved by increasing chitosan dosage. Accordingly to DMTA results, polyelectrolyte complexation led to obtain more flexible and resistant to mechanical deformation materials. Comparative analysis of the FTIR spectra of single polyelectrolytes, chitosan and alginate, and their mixtures indicated the formation of the polyelectrolyte complex without addition of reinforcing substances. MALDI-TOF analysis confirms the creation of polyelectrolyte aggregates (~197 Da) in samples with R ≥ 0.8; and their chemical stability and safety were proven by NMR analysis. The higher R the greater the number of polyanion–polycation aggregates seen in SEM as film morphology roughness.

The use of chitosan, lysozyme, and the nano-silver as antimicrobial ingredients of edible protective hydrosols applied into the surface of meat

The aim of this study was to design and produce biologically active edible hydrosols, which, when applied to the surface of food products, will protect them from oxidative changes, spoilage and growth of microorganisms. Verification of testing hypothesis and the degree of aim realization were performed by assessing a DPPH radical scavenging activity and microbial reduction of experimental hydrosols on the basis of hydroxypropylmethylcellulose (HPMC), chitosan (CH), lysozyme (L) and nanocolloidal silver (NAg). Antimicrobial activity of different concentrations of CH, L and NAg hydrosols against Gram (+) bacteria: Bacilllus cereus and Micrococcus flavus and Gram (−) bacteria: Escherichia coli and Pseudomonas fluorescens, which exist more often in food, were analyzed using serial dilution test. Total number of microorganisms was determined on meat sample covered by tested sols. Hydrosols containing chitosan and other bioactive substances caused death of each tested microorganism. Lack of chitosan in hydrosols is reflected in a slight inhibition of M. flavus, E. coli and P. fluorescens. Simultaneous influence of CH, L and NAg addition and storage time on total number of bacteria in meat samples with hydrosols was showed. The addition of lysozyme to sols composition significantly increases antioxidant activity.

The use of lysozyme to prepare biologically active chitooligomers

Two types of crustacean commercial chitosans (CS1, CS2) were dissolved in lactic acid solutions, hydrolysed by lysozyme and finally fractioned by methanol solutions into two parts containing chito-oligomers (CS-O1, CS-O2). The antioxidant power and antimicrobial properties of both fractions were studied and compared with non-hydrolysed CS1 and CS2. The antioxidant properties were determined by the ferric ion reducing antioxidant power (FRAP) method while the bioactive properties were evaluated against a strain of Listeria monocytogenes. CS-O obtained from the solid fraction of the chito-oligomers solid fractions treated with 90% methanol showed the highest reducing power. Microbiological tests showed that CS-O exhibit higher antilisterial activity than CS.

Characteristic of Gelatine, Carrageenan and Sodium Alginate Hydrosols Treated by Direct Electric Current

The aim of the study was to investigate the effect of using direct electric current (DC) of 400 mA for five minutes on the physiochemical properties of gelatine (2%, 4%, and 8%), carrageenan (1.5%, 2%, and 2.5%) and sodium alginate (0.75%, 1%, and 1.25%) hydrosols with different sodium chloride concentration. The pH, oxidation-reduction potential (ORP), electrical conductivity (EC), available chlorine concentration (ACC) and rheological parameters were measured. Moreover, Fourier transform infrared spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) analysis were carried out. The results have shown that pH, ORP, EC and ACC values are changed upon applying DC and the magnitude of change depends on the concentration of the polymer and the addition of sodium chloride. After seven days of storage, the ACC of the samples exposed to DC decreased by 88%–96%. The FT-IR spectra demonstrated that the structure of gelatine, carrageenan and sodium alginate are not significantly affected by DC. Furthermore, the use of DC did not affect the flow and gelation temperature of the hydrosols. These results suggest that the use of DC did not cause undesirable changes in hydrosols layer and these innovative materials can be used, e.g., for food preservation.

Study of Enzymatically Treated Alginate/Chitosan Hydrosols in Sponges Formation Process

The aim of the study was to produce 3D sponges based on enzymatically modified lysozyme selected polysaccharides and assess their physicochemical properties. The alginate/chitosan sponges were formed from polymers hydrosols in different proportions at a final concentration of 1% polysaccharides. Hydrosols were modified by lysozyme addition of 1000 U. Hydrosols without or with enzyme were analyzed for their reducing sugar content, rheological properties and ability to scavenge free radicals. Sponges formed from hydrosols were tested for solubility and compressive properties. Only chitosan was hydrolyzed by lysozyme. The morphology of sponges was investigated by scanning electron microscopy (SEM). It was proven that the antioxidant properties of hydrosols are dependent on the concentration of chitosan. It was also shown that the addition of lysozyme negatively affected the free radical scavenging ability of single hydrosols of alginate and chitosan, and their mixtures. The Ostwald de Waele as well as Herschel–Bulkley models of rheological properties fitted the experimental data well (R2 is between 0.947 and 1.000). Increase in textural features values of sponges was observed. Sponges with pure alginate and pure chitosan were almost completely soluble. The enzyme addition significantly changed the characteristics of the cross-section structure of sponges, and made the surface smoother.

Effect of low-pressure plasma treatment on the color and oxidative stability of raw pork during refrigerated storage

The effect of low-pressure plasma on quality attributes of meat is an important aspect, which must be considered before application in food. The aim of this study was to determine the color, fatty acid composition, lipid oxidation expressed as thiobarbituric acid reactive substances and total antioxidant capacity of raw pork samples exposed to helium low-pressure plasma treatment (20 kPa) for 0, 2, 5, and 10 min during the storage period. The thiobarbituric acid reactive substance concentrations of all plasma-treated samples during storage were in the range from 0.26 to 0.61 mg malondialdehyde/kg. Exposure time caused significant changes only in total color difference, hue angle, and chroma after 10 min of treatment. Ferric reducing ability of plasma values of meat samples decreased from 1.93 to 1.40 mmol Trolox Eq/kg after 14 days of storage. The storage period significantly affected proportion of polyunsaturated fatty acids, with an increase about 3% after 14 days of refrigeration storage while the content of saturated fatty acids was at the same level. Helium low-pressure plasma does not induce oxidative processes. Application of this decontamination technique while maintaining product quality is possible in food industry.

Effect of Film-Forming Alginate/Chitosan Polyelectrolyte Complex on the Storage Quality of Pork

Meat is one of the most challenging food products in the context of maintaining quality and safety. The aim of this work was to improve the quality of raw/cooked meat by coating it with sodium alginate (A), chitosan (C), and sodium alginate-chitosan polyelectrolyte complex (PEC) hydrosols. Antioxidant properties of A, C, and PEC hydrosols were determined. Subsequently, total antioxidant capacity (TAC), sensory quality of raw/cooked pork coated with experimental hydrosols, and antimicrobial efficiency of those hydrosols on the surface microbiota were analysed. Application analyses of hydrosol were performed during 0, 7, and 14 days of refrigerated storage in MAP (modified atmosphere packaging). Ferric reducing antioxidant power (FRAP) and (2,2-diphenyll-picrylhydrazyl (DPPH) analysis confirmed the antioxidant properties of A, C, and PEC. Sample C (1.0%) was characterized by the highest DPPH value (174.67 μM Trolox/mL) of all variants. PEC samples consisted of A 0.3%/C 1.0% and A 0.6%/C 1.0% were characterized by the greatest FRAP value (~7.21 μM Fe2+/mL) of all variants. TAC losses caused by thermal treatment of meat were reduced by 45% by coating meat with experimental hydrosols. Application of PEC on the meat surface resulted in reducing the total number of micro-organisms, psychrotrophs, and lactic acid bacteria by about 61%, and yeast and molds by about 45% compared to control after a two-week storage.

Cross-linked alginate/chitosan polyelectrolytes as carrier of active compound and beef color stabilizer.

The aim of this work was to develop polyelectrolyte material suitable for active beef steaks coatings, by complexation of chitosan (CH) and sodium alginate (ALG) in a broad range of alginate/chitosan ratios (R). The rheological analysis confirmed significant effect of polymers ratios on the physical properties of sodium alginate-chitosan (ACH) hydrosols. The shear thinning non-Newtonian nature, thixotropic behavior and gel-like structure of solutions were displayed. Obtained complexes possess DPPH radical scavenging activity corresponding to 5.33, 17.06 and 41.41μMTrolox/ml for 0ppm, 500ppm and 1000pmm of sodium erythorbate dose, respectively. Application of ACH hydrosols enriched with 1000ppm of sodium erythorbate enhanced redness and color stability of beef steaks during storage (∆E after 2-weeks of storage=1.44±0.08) compared to uncovered beef (∆E after 2-weeks of storage=3.53±0.13). The limited solubility in range of 0%-54.56% as well as favorable wetting properties (contact angle between 45°-66°) of polyelectrolyte ACH films were obtained.

Cytotoxicity, Bactericidal, and Antioxidant Activity of Sodium Alginate Hydrosols Treated with Direct Electric Current

The aim of the study was to investigate the effect of using direct electric current (DC) of 0, 200, and 400 mA for five minutes on the physiochemical properties, cytotoxicity, antibacterial, and antioxidant activity of sodium alginate hydrosols with different sodium chloride concentrations. The pH, oxidation-reduction potential (ORP), electrical conductivity (EC), and available chlorine concentration (ACC) were measured. The effect of sodium alginate hydrosols treated with DC on Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus, Micrococcus luteus, Escherichia coli, Salmonella enteritidis, Yersinia enterocolitica, Pseudomonas fluorescence, and RAW 264.7 and L929 cells was investigated. Subsequently, the antioxidant properties of hydrosols were evaluated by determining the scavenging ability of 1,1-diphenyl-2-picrylhydrazyl free radical (DPPH) and ferric reducing antioxidant power (FRAP). The results have shown that after applying 400 mA in hydrosol samples with 0.1% and 0.2% NaCl all tested bacteria were inactivated. The ACC concentration of C400 samples with NaCl was equal to 13.95 and 19.71 mg/L, respectively. The cytotoxicity analysis revealed that optimized electric field conditions and the addition of sodium chloride allow for the avoidance of toxicity effects on normal cells without disturbing the antibacterial effects. Due to the presence of oxidizing substances, the DPPH of variants treated with DC was lower than the DPPH of control samples.

Physicochemical Properties of Biopolymer Hydrogels Treated by Direct Electric Current

The objective of this study was to evaluate the changes within the physicochemical properties of gelatine (2%; 4%; 8%), carrageenan (1.5%; 2%; 2.5%) and sodium alginate (0.75%; 1%; 1.25%) hydrogels with different sodium chloride concentrations that were triggered by applying direct current (DC) of 400 mA for a duration of five minutes. There were three types of gels prepared for the purpose of the study: C, control; H, gels on the basis of hydrosols that were treated with DC; and G, gels treated with DC. In the course of the study, the authors carried out the following analyses: Texture Profile Analysis (TPA), Fourier Transform Infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and Swelling Ratio (SR). Furthermore, the color and pH of hydrogels were measured. The FTIR spectra showed that the structures of gelatine, carrageenan and sodium alginate do not significantly change upon applying DC. The results of TPA, SR, color and pH measurement indicate that hydrogels’ properties are significantly dependent on the type of polymer, its concentration and the type of the gel. By changing those parameters, the characteristics of such gels can be additionally tuned, which extends their applicability, e.g., in the food industry. Moreover, the analysis revealed that SR of H gel gelatine after 72 h of storage was 1.84-times higher than SR of the control sample, which indicated that this gel may be considered as a possible component for wound dressing materials.