Anna Zimoch-Korzycka

Study on Alginate–Chitosan Complex Formed with Different Polymers Ratio

Biomaterials based on polyelectrolyte complexation are an innovative concept of coatings and packaging production to be applied in a wide range of food products. The aim of this study was to obtain and characterize a sodium alginate–chitosan complex material with variable degree of polyion interactions by complexation of oppositely charged polysaccharides. In order to characterize polyelectrolyte complexes, theromogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), matrix-assisted laser desorption/ionization technique with time of flight analyzer (MALDI-TOF), and scanning electron microscopy (SEM) were performed. TGA analysis showed that thermal decomposition temperature depends on the polymer ratio (R) and thermal resistance of samples was improved by increasing chitosan dosage. Accordingly to DMTA results, polyelectrolyte complexation led to obtain more flexible and resistant to mechanical deformation materials. Comparative analysis of the FTIR spectra of single polyelectrolytes, chitosan and alginate, and their mixtures indicated the formation of the polyelectrolyte complex without addition of reinforcing substances. MALDI-TOF analysis confirms the creation of polyelectrolyte aggregates (~197 Da) in samples with R ≥ 0.8; and their chemical stability and safety were proven by NMR analysis. The higher R the greater the number of polyanion–polycation aggregates seen in SEM as film morphology roughness.

The use of chitosan, lysozyme, and the nano-silver as antimicrobial ingredients of edible protective hydrosols applied into the surface of meat

The aim of this study was to design and produce biologically active edible hydrosols, which, when applied to the surface of food products, will protect them from oxidative changes, spoilage and growth of microorganisms. Verification of testing hypothesis and the degree of aim realization were performed by assessing a DPPH radical scavenging activity and microbial reduction of experimental hydrosols on the basis of hydroxypropylmethylcellulose (HPMC), chitosan (CH), lysozyme (L) and nanocolloidal silver (NAg). Antimicrobial activity of different concentrations of CH, L and NAg hydrosols against Gram (+) bacteria: Bacilllus cereus and Micrococcus flavus and Gram (−) bacteria: Escherichia coli and Pseudomonas fluorescens, which exist more often in food, were analyzed using serial dilution test. Total number of microorganisms was determined on meat sample covered by tested sols. Hydrosols containing chitosan and other bioactive substances caused death of each tested microorganism. Lack of chitosan in hydrosols is reflected in a slight inhibition of M. flavus, E. coli and P. fluorescens. Simultaneous influence of CH, L and NAg addition and storage time on total number of bacteria in meat samples with hydrosols was showed. The addition of lysozyme to sols composition significantly increases antioxidant activity.

Study of Enzymatically Treated Alginate/Chitosan Hydrosols in Sponges Formation Process

The aim of the study was to produce 3D sponges based on enzymatically modified lysozyme selected polysaccharides and assess their physicochemical properties. The alginate/chitosan sponges were formed from polymers hydrosols in different proportions at a final concentration of 1% polysaccharides. Hydrosols were modified by lysozyme addition of 1000 U. Hydrosols without or with enzyme were analyzed for their reducing sugar content, rheological properties and ability to scavenge free radicals. Sponges formed from hydrosols were tested for solubility and compressive properties. Only chitosan was hydrolyzed by lysozyme. The morphology of sponges was investigated by scanning electron microscopy (SEM). It was proven that the antioxidant properties of hydrosols are dependent on the concentration of chitosan. It was also shown that the addition of lysozyme negatively affected the free radical scavenging ability of single hydrosols of alginate and chitosan, and their mixtures. The Ostwald de Waele as well as Herschel–Bulkley models of rheological properties fitted the experimental data well (R2 is between 0.947 and 1.000). Increase in textural features values of sponges was observed. Sponges with pure alginate and pure chitosan were almost completely soluble. The enzyme addition significantly changed the characteristics of the cross-section structure of sponges, and made the surface smoother.

Effect of Film-Forming Alginate/Chitosan Polyelectrolyte Complex on the Storage Quality of Pork

Meat is one of the most challenging food products in the context of maintaining quality and safety. The aim of this work was to improve the quality of raw/cooked meat by coating it with sodium alginate (A), chitosan (C), and sodium alginate-chitosan polyelectrolyte complex (PEC) hydrosols. Antioxidant properties of A, C, and PEC hydrosols were determined. Subsequently, total antioxidant capacity (TAC), sensory quality of raw/cooked pork coated with experimental hydrosols, and antimicrobial efficiency of those hydrosols on the surface microbiota were analysed. Application analyses of hydrosol were performed during 0, 7, and 14 days of refrigerated storage in MAP (modified atmosphere packaging). Ferric reducing antioxidant power (FRAP) and (2,2-diphenyll-picrylhydrazyl (DPPH) analysis confirmed the antioxidant properties of A, C, and PEC. Sample C (1.0%) was characterized by the highest DPPH value (174.67 μM Trolox/mL) of all variants. PEC samples consisted of A 0.3%/C 1.0% and A 0.6%/C 1.0% were characterized by the greatest FRAP value (~7.21 μM Fe2+/mL) of all variants. TAC losses caused by thermal treatment of meat were reduced by 45% by coating meat with experimental hydrosols. Application of PEC on the meat surface resulted in reducing the total number of micro-organisms, psychrotrophs, and lactic acid bacteria by about 61%, and yeast and molds by about 45% compared to control after a two-week storage.

Cross-linked alginate/chitosan polyelectrolytes as carrier of active compound and beef color stabilizer.

The aim of this work was to develop polyelectrolyte material suitable for active beef steaks coatings, by complexation of chitosan (CH) and sodium alginate (ALG) in a broad range of alginate/chitosan ratios (R). The rheological analysis confirmed significant effect of polymers ratios on the physical properties of sodium alginate-chitosan (ACH) hydrosols. The shear thinning non-Newtonian nature, thixotropic behavior and gel-like structure of solutions were displayed. Obtained complexes possess DPPH radical scavenging activity corresponding to 5.33, 17.06 and 41.41μMTrolox/ml for 0ppm, 500ppm and 1000pmm of sodium erythorbate dose, respectively. Application of ACH hydrosols enriched with 1000ppm of sodium erythorbate enhanced redness and color stability of beef steaks during storage (∆E after 2-weeks of storage=1.44±0.08) compared to uncovered beef (∆E after 2-weeks of storage=3.53±0.13). The limited solubility in range of 0%-54.56% as well as favorable wetting properties (contact angle between 45°-66°) of polyelectrolyte ACH films were obtained.

Polysaccharide-Based Edible Coatings Containing Cellulase for Improved Preservation of Meat Quality during Storage

The objectives of this study were to optimize the composition of edible food coatings and to extend the shelf-life of pork meat. Initially, nine meat samples were coated with solutions containing chitosan and hydroxypropyl methylcellulose at various cellulase concentrations: 0%, 0.05%, and 0.1%, stored for 0, 7, and 14 days. Uncoated meat served as the controls. The samples were tested for pH, water activity (aw), total number of microorganisms (TNM), psychrotrophs (P), number of yeast and molds (NYM), colour, and thiobarbituric acid-reactive substances (TBARS). The pH and aw values varied from 5.42 to 5.54 and 0.919 to 0.926, respectively. The reductions in the TNM, P, and NYM after 14 days of storage were approximately 2.71 log cycles, 1.46 log cycles, and 0.78 log cycles, respectively. The enzyme addition improved the stability of the red colour. Significant reduction in TBARS was noted with the inclusion of cellulase in the coating material. Overall, this study provides a promising alternative method for the preservation of pork meat in industry.

Antimicrobial and Antioxidant Activity of Chitosan/Hydroxypropyl Methylcellulose Film-Forming Hydrosols Hydrolyzed by Cellulase

The aim of this study was to evaluate the impact of cellulase (C) on the biological activity of chitosan/hydroxypropyl methylcellulose (CH/HPMC) film-forming hydrosols. The hydrolytic activity of cellulase in two concentrations (0.05% and 0.1%) was verified by determination of the progress of polysaccharide hydrolysis, based on viscosity measurement and reducing sugar-ends assay. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging effect, the ferric reducing antioxidant power (FRAP), and microbial reduction of Pseudomonas fluorescens, Yersinia enterocolitica, Bacillus cereus, and Staphylococcus aureus were studied. During the first 3 h of reaction, relative reducing sugar concentration increased progressively, and viscosity decreased rapidly. With increasing amount of enzyme from 0.05% to 0.1%, the reducing sugar concentration increased, and the viscosity decreased significantly. The scavenging effect of film-forming solutions was improved from 7.6% at time 0 and without enzyme to 52.1% for 0.1% cellulase after 20 h of reaction. A significant effect of cellulase addition and reaction time on antioxidant power of the tested film-forming solutions was also reported. Film-forming hydrosols with cellulase exhibited a bacteriostatic effect on all tested bacteria, causing a total reduction.

Physicochemical Properties of Edible Chitosan/Hydroxypropyl Methylcellulose/Lysozyme Films Incorporated with Acidic Electrolyzed Water

The treatment with acidic electrolyzed water (AEW) is a promising disinfection method due to its effectiveness in reducing microbial population. The aim of the study was to evaluate physicochemical properties of chitosan/HPMC films incorporated with lysozyme and acidic electrolyzed water. In the composite films, decreasing film solubility and increasing concentration of sodium chloride solution and prolongation of electrolysis time were observed. Electrolysis process with sodium chloride induces spongy network of film structure. The use of AEW has not changed chemical composition of films which was proved by 1H NMR, MALDI-TOF, and FT-IR spectroscopy. The research confirmed that electrolysis significantly improved thermomechanical properties of the examined films. The contact angle values of the films were quite similar and ranged between 56° and 73°. The increase of salt concentration used in the electrolysis process had an impact on increasing flexibility of samples. Application of electrolyzed water in commonly used food processing systems is possible. Fusion of AEW and biopolymers may provide better integration with coated food product and multidirectional protecting effect.

The Effects of Using Sodium Alginate Hydrosols Treated with Direct Electric Current as Coatings for Sausages

We investigated the effect of sodium alginate hydrosols (1%) with 0.2% of NaCl treated with direct electric current (DC) used as a coating on microbial (Total Viable Counts, Psychrotrophic bacteria, yeast and molds, Lactic acid bacteria, Enterobacteriaceae), physiochemical (pH, lipid oxidation, antioxidant activity, weight loss, color) and sensory properties of skinned pork sausages or with artificial casing stored at 4 °C for 28 days. Moreover, the cytotoxicity analysis of sodium alginate hydrogels was performed. The results have shown that application of experimental coatings on the sausage surface resulted in reducing all tested groups of microorganisms compared to control after a 4-week storage. The cytotoxicity analysis revealed that proliferation of RAW 264.7 and L929 is not inhibited by the samples treated with 200 mA. Ferric reducing antioxidant power (FRAP) and free radical scavenging activity (DPPH) analyses showed that there are no significant differences in antioxidant properties between control samples and those covered with sodium alginate. After 28 days of storage, the highest value of thiobarbituric acid-reactive substances (TBARS) was noticed for variants treated with 400 mA (1.07 mg malondialdehyde/kg), while it was only slightly lower for the control sample (0.95 mg MDA/kg). The obtained results suggest that sodium alginate treated with DC may be used as a coating for food preservation because of its antimicrobial activity and lack of undesirable impact on the quality factors of sausages.