Anicuta Stoica-Guzun

Ultrasound influence upon calcium carbonate precipitation on bacterial cellulose membranes

The effect of ultrasonic irradiation (40 kHz) on the calcium carbonate deposition on bacterial cellulose membranes was investigated using calcium chloride (CaCl(2)) and sodium carbonate (Na(2)CO(3)) as starting reactants. The composite materials containing bacterial cellulose-calcium carbonate were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and color measurements. The polymorphs of calcium carbonate that were deposited on bacterial cellulose membranes in the presence or in the absence of ultrasonic irradiation were calcite and vaterite. The morphology of the obtained crystals was influenced by the concentration of starting solutions and by the presence of ultrasonic irradiation. In the presence of ultrasonic irradiation the obtained crystals were bigger and in a larger variety of shapes than in the absence of ultrasounds: from cubes of calcite to spherical and flower-like vaterite particles. Bacterial cellulose could be a good matrix for obtaining different types of calcium carbonate crystals.

Composite films of poly(vinyl alcohol)–chitosan–bacterial cellulose for drug controlled release

Mono and multilayer composite films of poly(vinyl alcohol)-chitosan-bacterial cellulose (PVA/chitosan/BC) have been prepared to achieve controlled release of ibuprofen sodium salt (IbuNa) as model drug. The composite films have been characterized by Fourier transformed infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Surface morphology was investigated by scanning electron microscopy (SEM). Equilibrium swelling was measured in water at two different pH values and in vitro release of IbuNa in pH 1.2 and pH 7.4 media was studied. The release experiments revealed that drug release is pH sensitive. The release kinetics of IbuNa could be described by the Fickian model of diffusion with a good agreement. The IbuNa release rate was decreasing for all the films as the BC concentration was increased in the films composition, the decrease being higher for the multilayer films.

Drug release kinetics from carboxymethylcellulose-bacterial cellulose composite films.

Composite films of sodium carboxymethyl cellulose and bacterial cellulose (NaCMC-BC) cross-linked with citric acid (CA) were prepared by solution casting method. Ibuprofen sodium salt (IbuNa) has been used to study the mechanism of drug release from composite films. Surface morphology was investigated by scanning electron microscopy (SEM) and proved that the BC content influences the aspect of the films. Fourier transformed infrared spectroscopy (FTIR) revealed specific peaks in IR spectra of composite films which sustain that NaCMC was cross-linked with CA. Starting from swelling observations, the release kinetic of IbuNa was described using a model which neglects the volume expansion due to polymer swelling and which considers non-linear diffusion coefficients for drug and solvent. The IbuNa release is also influenced by BC content, the drug release rate was decreasing with the increase of BC content.

Box-Behnken experimental design for chromium(VI) ions removal by bacterial cellulose-magnetite composites

In this study bacterial cellulose-magnetite composites were synthesised for the removal of chromium(VI) from aqueous solutions. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis and X-ray Photoelectron Spectroscopy (XPS) were used to characterize the bacterial cellulose-magnetite composites and to reveal the uniform dispersion of nanomagnetite in the BC matrix. Magnetic properties were also measured to confirm the magnetite immobilization on bacterial cellulose membrane. The effects of initial Cr(VI) concentration, solution pH and solid/liquid ratio upon chromium removal were examined using the statistical Box-Behnken Design. Because of the possibility of magnetite dissolution during chromium(VI) adsorption, the degree of iron leaching was also analysed in the same conditions as Cr(VI) adsorption. From the factors affecting chromium(VI) adsorption the most important was solution pH. The highest Cr(VI) removal efficiency was observed at pH 4, accompanied by the lowest iron leaching in the solution. The adsorption experiments also indicated that the adsorption process of chromium(VI) is well described by Freundlich adsorption model. Our results proved that the BC-magnetite composites could be used for an efficient removal of chromium(VI) from diluted solutions with a minimum magnetite dissolution during operation.

Influence of sodium dodecyl sulfate and cetyl trimethylammonium bromide upon calcium carbonate precipitation on bacterial cellulose

Calcium carbonate was deposed on bacterial cellulose (BC) never-dried membranes in the presence of different concentrations of sodium dodecyl sulfate (SDS) and cetyl trimethylammonium bromide (CTAB) by a precipitation reaction between aqueous solutions of calcium chloride (CaCl2) and sodium carbonate (Na2CO3) containing, or not, surfactant in their composition. Different shapes of crystals were obtained from rhombohedral ones to flowerlike, depending on surfactant type and concentration. From the two surfactants tested, SDS has a greater influence on calcium carbonate morphology than CTAB. The only polymorph obtained in all studied cases was calcite. The composite films BC-calcite were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and color measurements. The obtained BC-calcium carbonate composites could be used in paper manufacturing.

Batch Extraction of Citric Acid with Liquid Surfactant Membranes

The aim of this paper is to study, experimentally and theoretically, the extraction of citric acid. A new tertiary amine is tested as the carrier. The influence of amine, surfactant, and stripping agent concentrations on the final product recovery are the main aspects analyzed experimentally. The experimental results are compared with the theoretical predictions of a model similar to the developed by Chaudhury and Pyle.

Green Synthesis of Silver-Bacterial Cellulose Composites Using Turmeric Powder Extract

Abstract. Bacterial cellulose-silver (BC-silver) composites are known as biomaterials with good antimicrobial properties. The aim of this paper is to present a green route to produce antibacterial BC-silver composites using Curcuma longa tuber powder (turmeric) extract as reducing agent. The effect of medium pH and immersion time in the turmeric extract upon the silver nanoparticles was studied. The synthesis of silver nanoparticles deposited on bacterial cellulose was confirmed by ultraviolet-visible (UV-VIS) spectral studies, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX). The antibacterial activity of the nanocomposites was studied by inhibition zone method against Escherichia coli K12-MG1655, all the composites having a good antimicrobial activity.