Sorin Ion Jinga

Ultrasound influence upon calcium carbonate precipitation on bacterial cellulose membranes

The effect of ultrasonic irradiation (40 kHz) on the calcium carbonate deposition on bacterial cellulose membranes was investigated using calcium chloride (CaCl(2)) and sodium carbonate (Na(2)CO(3)) as starting reactants. The composite materials containing bacterial cellulose-calcium carbonate were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and color measurements. The polymorphs of calcium carbonate that were deposited on bacterial cellulose membranes in the presence or in the absence of ultrasonic irradiation were calcite and vaterite. The morphology of the obtained crystals was influenced by the concentration of starting solutions and by the presence of ultrasonic irradiation. In the presence of ultrasonic irradiation the obtained crystals were bigger and in a larger variety of shapes than in the absence of ultrasounds: from cubes of calcite to spherical and flower-like vaterite particles. Bacterial cellulose could be a good matrix for obtaining different types of calcium carbonate crystals.

Composite films of poly(vinyl alcohol)–chitosan–bacterial cellulose for drug controlled release

Mono and multilayer composite films of poly(vinyl alcohol)-chitosan-bacterial cellulose (PVA/chitosan/BC) have been prepared to achieve controlled release of ibuprofen sodium salt (IbuNa) as model drug. The composite films have been characterized by Fourier transformed infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Surface morphology was investigated by scanning electron microscopy (SEM). Equilibrium swelling was measured in water at two different pH values and in vitro release of IbuNa in pH 1.2 and pH 7.4 media was studied. The release experiments revealed that drug release is pH sensitive. The release kinetics of IbuNa could be described by the Fickian model of diffusion with a good agreement. The IbuNa release rate was decreasing for all the films as the BC concentration was increased in the films composition, the decrease being higher for the multilayer films.

Drug release kinetics from carboxymethylcellulose-bacterial cellulose composite films.

Composite films of sodium carboxymethyl cellulose and bacterial cellulose (NaCMC-BC) cross-linked with citric acid (CA) were prepared by solution casting method. Ibuprofen sodium salt (IbuNa) has been used to study the mechanism of drug release from composite films. Surface morphology was investigated by scanning electron microscopy (SEM) and proved that the BC content influences the aspect of the films. Fourier transformed infrared spectroscopy (FTIR) revealed specific peaks in IR spectra of composite films which sustain that NaCMC was cross-linked with CA. Starting from swelling observations, the release kinetic of IbuNa was described using a model which neglects the volume expansion due to polymer swelling and which considers non-linear diffusion coefficients for drug and solvent. The IbuNa release is also influenced by BC content, the drug release rate was decreasing with the increase of BC content.

Box-Behnken experimental design for chromium(VI) ions removal by bacterial cellulose-magnetite composites

In this study bacterial cellulose-magnetite composites were synthesised for the removal of chromium(VI) from aqueous solutions. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis and X-ray Photoelectron Spectroscopy (XPS) were used to characterize the bacterial cellulose-magnetite composites and to reveal the uniform dispersion of nanomagnetite in the BC matrix. Magnetic properties were also measured to confirm the magnetite immobilization on bacterial cellulose membrane. The effects of initial Cr(VI) concentration, solution pH and solid/liquid ratio upon chromium removal were examined using the statistical Box-Behnken Design. Because of the possibility of magnetite dissolution during chromium(VI) adsorption, the degree of iron leaching was also analysed in the same conditions as Cr(VI) adsorption. From the factors affecting chromium(VI) adsorption the most important was solution pH. The highest Cr(VI) removal efficiency was observed at pH 4, accompanied by the lowest iron leaching in the solution. The adsorption experiments also indicated that the adsorption process of chromium(VI) is well described by Freundlich adsorption model. Our results proved that the BC-magnetite composites could be used for an efficient removal of chromium(VI) from diluted solutions with a minimum magnetite dissolution during operation.

Plackett–Burman experimental design for bacterial cellulose–silica composites synthesis

Bacterial cellulose-silica hybrid composites were prepared starting from wet bacterial cellulose (BC) membranes using Stöber reaction. The structure and surface morphology of hybrid composites were examined by FTIR and SEM. The SEM pictures revealed that the silica particles are attached to BC fibrils and are well dispersed in the BC matrix. The influence of silica particles upon BC crystallinity was studied using XRD analysis. Thermogravimetric (TG) analysis showed that the composites are stable up to 300°C. A Plackett-Burman design was applied in order to investigate the influence of process parameters upon silica particle sizes and silica content of BC-silica composites. The statistical model predicted that it is possible for silica particles size to vary the synthesis parameters in order to obtain silica particles deposed on BC membranes in the range from 34.5 to 500 nm, the significant parameters being ammonia concentration, reaction time and temperature. The silica content also varies depending on process parameters, the statistical model predicting that the most influential parameters are water-tetraethoxysilane (TEOS) ratio and reaction temperature. The antimicrobial behavior on Staphylococcus aureus of BC-silica composites functionalized with usnic acid (UA) was also studied, in order to create improved surfaces with antiadherence and anti-biofilm properties.

Influence of sodium dodecyl sulfate and cetyl trimethylammonium bromide upon calcium carbonate precipitation on bacterial cellulose

Calcium carbonate was deposed on bacterial cellulose (BC) never-dried membranes in the presence of different concentrations of sodium dodecyl sulfate (SDS) and cetyl trimethylammonium bromide (CTAB) by a precipitation reaction between aqueous solutions of calcium chloride (CaCl2) and sodium carbonate (Na2CO3) containing, or not, surfactant in their composition. Different shapes of crystals were obtained from rhombohedral ones to flowerlike, depending on surfactant type and concentration. From the two surfactants tested, SDS has a greater influence on calcium carbonate morphology than CTAB. The only polymorph obtained in all studied cases was calcite. The composite films BC-calcite were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and color measurements. The obtained BC-calcium carbonate composites could be used in paper manufacturing.

Ba(Zn1/3Ta2/3)O3 Ceramics for Microwave and Millimeter-wave Applications

The Ba(Zn1/3Ta2/3)O3 (BZT) ceramic samples were prepared by solid‐state reaction and sintered in the range 1550–1650°C for 2 h. Several methods—X‐ray diffraction (XRD) and scanning electron microscopy (SEM)—were used for structural and morphological characterization. The unit cell distortion and the presence of the secondary phase content were studied by XRD. A long‐range order with a 2:1 ratio of Ta and Zn cations on the octahedral positions of the perovskite structure was noticed with the increase of the sintering temperature. SEM investigations revealed polyhedral well‐faceted grains and large grain size distribution. The dielectric properties in the microwave range were measured at room temperature and at 1 kHz on a large temperature interval (±150°C). The dielectric parameters were correlated with morphological and structural properties. Ceramic samples were annealed at 1410°C for 30 h to improve the microwave properties. The dielectric constant of BZT samples measured at 6 GHz and at 1 kHz was between 27 and 28 on the whole temperature range, that is, typical values for BZT material. The temperature coefficient of the resonance frequency at 6 GHz exhibits positive values less than 6 ppm/°C.

New Coll-HA/BT composite materials for hard tissue engineering.

The integration of ceramic powders in composite materials for bone scaffolds can improve the osseointegration process. This work was aimed to the synthesis and characterization of new collagen-hydroxyapatite/barium titanate (Coll-HA/BT) composite materials starting from barium titanate (BT) nanopowder, hydroxyapatite (HA) nanopowder and collagen (Coll) gel. BT nanopowder was produced by combining two wet-chemical approaches, sol-gel and hydrothermal methods. The resulting materials were characterized in terms of phase composition and microstructure by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. Moreover, the biocompatibility and bioactivity of the composite materials were assessed by in vitro tests. The synthesized BT particles exhibit an average size of around 35 nm and a spherical morphology, with a pseudo-cubic or tetragonal symmetry. The diffraction spectra of Coll-HA and Coll-HA/BT composite materials indicate a pronounced interaction between Col and the mineral phases, meaning a good mineralization of Col fibres. As well, the in vitro tests highlight excellent osteoinductive properties for all biological samples, especially for Coll-HA/BT composite materials, fact that can be attributed to the ferromagnetic properties of BT.

5 nm structures produced by direct laser writing.

Here we present a new approach to overcome the optical diffraction limit by using novel materials. In the paper, we report experimental results obtained by high-resolution transmission electron microscopy (HRTEM) and optical absorption spectroscopy, for a fluorescent photosensitive glass-ceramic containing rare-earth ions such as samarium (Sm). Using a home built dynamic tester, with a low power laser, we recorded nanostructures having 5 nm line widths. In the line structure, measurements reveal the presence of silver nanocrystals with few nanometre sizes. HRTEM shows that there is a random orientation of the nanocrystals. A writing mechanism with three steps is proposed.

Potassium sorbate release from poly(vinyl alcohol)-bacterial cellulose films ‡

Active packaging materials are the subject of research because their performance exceeds that of traditional packaging. From this class, antimicrobial materials extend the shelf-life of products and reduce the risk of contamination by pathogens. In this paper, new composite materials with antimicrobial properties are obtained by using polyvinyl alcohol and bacterial cellulose powder. Potassium (2E,4E)-hexa-2,4-dienoate was used as the antimicrobial agent. The films thus obtained were characterised using Fourier-transform infrared spectroscopy and scanning electron microscopy. Mass transfer phenomena concerning the release of potassium (2E,4E)-hexa-2,4-dienoate were investigated. The results indicated that the new biocomposite films could be used as antimicrobial packaging materials.