Anna C. Peacock

Self-similar propagation of high-power parabolic pulses in optical fiber amplifiers

Self-similarity techniques are used to study pulse propagation in a normal-dispersion optical fiber amplifier with an arbitrary longitudinal gain profile. Analysis of the nonlinear Schrödinger equation that describes such an amplifier leads to an exact solution in the high-power limit that corresponds to a linearly chirped parabolic pulse. The self-similar scaling of the propagating pulse in the amplifier is found to be determined by the functional form of the gain profile, and the solution is confirmed by numerical simulations. The implications for achieving chirp-free pulses after compression of the amplifier output are discussed.

Silicon-Based Photonic Integration Beyond the Telecommunication Wavelength Range

In this paper we discuss silicon-based photonic integrated circuit technology for applications beyond the telecommunication wavelength range. Silicon-on-insulator and germanium-on-silicon passive waveguide circuits are described, as well as the integration of III-V semiconductors, IV-VI colloidal nanoparticles and GeSn alloys on these circuits for increasing the functionality. The strong nonlinearity of silicon combined with the low nonlinear absorption in the mid-infrared is exploited to generate picosecond pulse based supercontinuum sources, optical parametric oscillators and wavelength translators connecting the telecommunication wavelength range and the mid-infrared.

Zinc Selenide Optical Fibers

Semiconductor waveguide fabrication for photonics applications is usually performed in a planar geometry. However, over the past decade a new field of semiconductor-based optical fiber devices has emerged. The drawing of soft chalcogenide semiconductor glasses together with low melting point metals allows for meters-long distributed photoconductive detectors, for example.[1,2] Crystalline unary semiconductors (e.g., Si, Ge) have been chemically deposited at high pressure into silica capillaries,[3,4] allowing the optical and electronic properties of these materials to be exploited for applications such as all-fiber optoelectronics.[5-7] In contrast to planar rib and ridge waveguides with rectilinear cross sections that generally give rise to polarization dependence, the cylindrical fiber waveguides have the advantage of a circular, polarization-independent cross section. Furthermore, the fiber pores, and thus the wires deposited in them, are exceptionally smooth[8] with extremely uniform diameter over their entire length. The high-pressure chemical vapor deposition (HPCVD) technique is simple, low cost, and flexible so that it can be modified to fill a range of capillaries with differing core dimensions, while high production rates can be obtained by parallel fabrication of multiple fibers in a single deposition. It can also be extended to fill the large number of micro- and nanoscale pores in microstructured optical fibers (MOFs), providing additional geometrical design flexibility to enhance the potential application base of the fiber devices.[9] Semiconductor fibers fabricated via HPCVD in silica pores also retain the inherent characteristics of silica fibers, including their robustness and compatibility with existing optical fiber infrastructure, thus presenting considerable advantages over fibers based on multicomponent soft glasses.

Low loss silicon fibers for photonics applications

Silicon fibers are fabricated using a high pressure chemical deposition technique to deposit the semiconductor material inside a silica capillary. The silicon is deposited in an amorphous state into pure silica capillaries and can be crystallized to polysilicon after the deposition via a high temperature anneal. Optical transmission measurements of various amorphous and polycrystalline core materials were performed in order to determine their linear losses. Incorporating silicon functionality inside the fiber geometry opens up new possibilities for the next generation of integrated silicon photonics devices.

Nonlinear transmission properties of hydrogenated amorphous silicon core optical fibers.

The nonlinear properties of a low loss hydrogenated amorphous silicon core fiber have been characterized for transmission of high power pulses at 1540 nm. Numerical modelling of the pulse propagation in the amorphous core material was used to establish the two-photon absorption, free-carrier absorption and the nonlinear refractive index, which were found to be larger than the values typical for crystalline silicon. Calculation of a nonlinear figure of merit demonstrates the potential for these hydrogenated amorphous silicon core fibers to be used in nonlinear silicon photonics applications.

Silicon-based heterogeneous photonic integrated circuits for the mid-infrared

In this paper we present our recent work on mid-infrared photonic integrated circuits for spectroscopic sensing applications. We discuss the use of silicon-based photonic integrated circuits for this purpose and detail how a variety of optical functions in the mid-infrared besides passive waveguiding and filtering can be realized, either relying on nonlinear optics or on the integration of other materials such as GaSb-based compound semiconductors, GeSn epitaxy and PbS colloidal nanoparticles.

Guided modes in channel waveguides with a negative index of refraction

The guided modes of a negative refractive index channel waveguide have been numerically investigated. It has been found that the modes exhibit a number of unusual properties that differ considerably from those of a conventional waveguide. In particular, it has been shown that these waveguides can exhibit low or negative group velocity as well as extraordinarily large group velocity dispersion. Calculation of the Poynting vector reveals that it is possible to support a mode with a zero energy flux motivating a simple design for an optical trap.

Harmonic generation in a two-dimensional nonlinear quasi-crystal

Second-harmonic generation in a two-dimensional nonlinear quasi-crystal is demonstrated for the first time to our knowledge. Temperature and wavelength tuning of the crystal reveal the uniformity of the pattern while angle tuning reveals the dense nature of the crystals Fourier spectrum. These results compare well with theoretical predictions showing the excellent uniformity of the crystal and suggest that more-complicated nonlinear holograms should be possible.

Extreme electronic bandgap modification in laser-crystallized silicon optical fibres

For decades now, silicon has been the workhorse of the microelectronics revolution and a key enabler of the information age. Owing to its excellent optical properties in the near- and mid-infrared, silicon is now promising to have a similar impact on photonics. The ability to incorporate both optical and electronic functionality in a single material offers the tantalizing prospect of amplifying, modulating and detecting light within a monolithic platform. However, a direct consequence of silicons transparency is that it cannot be used to detect light at telecommunications wavelengths. Here, we report on a laser processing technique developed for our silicon fibre technology through which we can modify the electronic band structure of the semiconductor material as it is crystallized. The unique fibre geometry in which the silicon core is confined within a silica cladding allows large anisotropic stresses to be set into the crystalline material so that the size of the bandgap can be engineered. We demonstrate extreme bandgap reductions from 1.11 eV down to 0.59 eV, enabling optical detection out to 2,100 nm.

Ultrafast optical control using the Kerr nonlinearity in hydrogenated amorphous silicon microcylindrical resonators

Microresonators are ideal systems for probing nonlinear phenomena at low thresholds due to their small mode volumes and high quality (Q) factors. As such, they have found use both for fundamental studies of light-matter interactions as well as for applications in areas ranging from telecommunications to medicine. In particular, semiconductor-based resonators with large Kerr nonlinearities have great potential for high speed, low power all-optical processing. Here we present experiments to characterize the size of the Kerr induced resonance wavelength shifting in a hydrogenated amorphous silicon resonator and demonstrate its potential for ultrafast all-optical modulation and switching. Large wavelength shifts are observed for low pump powers due to the high nonlinearity of the amorphous silicon material and the strong mode confinement in the microcylindrical resonator. The threshold energy for switching is less than a picojoule, representing a significant step towards advantageous low power silicon-based photonic technologies.