Anna Fàbregas

Impact of physical parameters on particle size and reaction yield when using the ionic gelation method to obtain cationic polymeric chitosan-tripolyphosphate nanoparticles

Ionic gelation is the most frequently used method to obtain chitosan-tripolyphosphate nanoparticles due to its simplicity and because it does not generate waste solvents in the samples prepared. This paper presents a study of the physical factors involved in this method for obtaining nanoparticles in order to determine which of them significantly influences the particle size of polymeric nanoparticles made from low-molecular-weight chitosan, without any additional chemical treatment, with the aim of standardising and optimising the method conditions, in addition to establishing the reaction yield. The results indicate that stirring speed during ionic gelation reaction is decisive for the size of the nanoparticles obtained. Furthermore, it thus follows that the stirring speed during ionic gelation significantly affects reaction yield, and therefore, by manipulating this parameter a greater proportion of nanoparticles of a given size range can be obtained.

A new optimized formulation of cationic solid lipid nanoparticles intended for gene delivery: Development, characterization and DNA binding efficiency of TCERG1 expression plasmid

Solid lipid nanoparticles (SLNs) are being considered as a new approach for therapeutics for many known diseases. In addition to drug delivery, their use as non-viral vectors for gene delivery can be achieved by the inclusion of cationic lipids, which provide a positive surface potential that favours binding to the DNA backbone. This work is based on the idea that the optimization of the components is required as the first step in simplifying the qualitative and quantitative composition of SLNs as much as possible without affecting the essential properties that define SLNs as optimal non-viral vectors for gene delivery. We selected the best lipids and surfactants in terms of particle size and zeta potential and characterized the properties of the resulting nanoparticles using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The SLNs had a particle size of approximately 120 nm and a positive surface charge of 42 mV. In addition, we analysed the main physicochemical characteristics of the bulk components of the nanoparticles using X-ray diffraction (XRD), differential scanning calorimetry (DSC) and mass spectrometry (MS). The suitability of the optimized SLNs for DNA binding was evaluated after the lyophilisation process using a carboxyl-terminal region of the TCERG1 gene, a human factor that has been implicated in several diseases. We show that the SLNs presented high efficiency in the binding of DNA, and importantly, they presented no toxicity when assayed in an in vivo system.

The use of the SeDeM diagram expert system for the formulation of Captopril SR matrix tablets by direct compression

The SeDeM diagram expert system has been used to study excipients, Captopril and designed formulations for their galenic characterization and to ascertain the critical points of the formula affecting product quality to obtain suitable formulations of Captopril direct compression SR matrix tablets. The application of the SeDeM diagram expert system enables selecting excipients with in order to optimize the formula in the preformulation and formulation studies. The methodology is based on the implementation of ICH Q8, establishing the design space of the formula with the use of experiment design, using the parameters of the SeDeM diagram expert system as system responses.

Chitosan nanoparticles as non-viral gene delivery systems: Determination of loading efficiency

Chitosan has been studied for use in particle delivery systems for therapeutic purposes, since one of its most important applications is as a non-viral vector in gene therapy. Due to its positive charge, it is capable of forming DNA complexes (polyplexes) obtained through several methods and with the property of protecting nucleic acids. Two methods for obtaining the nanoparticles of chitosan-nucleic acids are reported in this study: simple complexation (of depolymerized chitosan or of different chitosan salts with plasmid) and ionic gelation (by adsorption of plasmid in the nanoparticles or by encapsulation of plasmid into nanoparticles). The determination of the loading efficiency of chitosan nanoparticles with the plasmid is carried out by electrophoretic mobility of the samples on agarose gel. Furthermore, the nanoparticles have been characterized according to their morphology, size and surface charge using AFM, TEM, laser diffraction and dynamic light scattering techniques. The polyplexes obtained have been found to be spherical and nanometric in size (between 100-230nm) with a zeta potential between 37 and 48mV. Positive results have been obtained by agarose gel electrophoresis for all studied cases: a concentration of between 20 and 30μg/mL of chitosan salts is required while for the remaining chitosan samples studied, 100% loading efficiency does not occur until a concentration equal to 100μg/mL (regardless of previous depolymerisation and the method performed). Chitosan-plasmid nanocapsules have been obtained at the polymer concentrations worked with (between 0.025 and 0.2%).

Development and Validation of a Stability Indicating RP-HPLC Method for Hydrocortisone Acetate Active Ingredient, Propyl Parahydroxybenzoate and Methyl Parahydroxybenzoate Preservatives, Butylhydroxyanisole Antioxidant, and Their Degradation Products in a Rectal Gel Formulation.

A stability indicating method was established through a stress study, wherein different methods of degradation (oxidation, hydrolysis, photolysis, and temperature) were studied simultaneously to determine the active ingredient hydrocortisone acetate, preservatives propyl parahydroxybenzoate, and methyl parahydroxybenzoate, antioxidant butylhydroxyanisole (BHA), and their degradation products in a semisolid dosage gel form. The proposed method was suitably validated using a Zorbax SB-Phenyl column and gradient elution. The mobile phase consisted of a mixture of methanol, acetonitrile, and water in different proportions according to a planned program at a flow rate of 1.5 mL/min. The diode array detector was set at 240 nm for the active substance and two preservatives, and 290 nm for BHA. The validation study was conducted according to International Conference on Harmonization guidelines for specificity, linearity, repeatability, precision, and accuracy. The method was used for QC of hydrocortisone acetate gel and for the stability studies with the aim of quantifying the active substance, preservatives, antioxidant, and degradation products. It has proved to be suitable as a fast and reliable method for QC.

Improved formulation of cationic solid lipid nanoparticles displays cellular uptake and biological activity of nucleic acids

Non-viral delivery using cationic solid lipid nanoparticles (SLNs) represents a useful strategy to introduce large DNA and RNA molecules to target cells. A careful selection of components and their amounts is critical to improve transfection efficiency. In this work, a selected and optimized formulation of SLNs was used to efficiently transfect circular DNA and linear RNA molecules into cells. We characterized the main physicochemical characteristics and binding capabilities of these SLNs and show that they deliver DNA and RNA molecules into cells where they display full bioactivity at nontoxic concentrations using fluorescence- and luminescence-based methodologies. Hence, we established a novel and simple SLN formulation as a powerful tool for future therapeutic use.

Administration of chitosan-tripolyphosphate-DNA nanoparticles to knockdown glutamate dehydrogenase expression impairs transdeamination and gluconeogenesis in the liver

Glutamate dehydrogenase (GDH) plays a major role in amino acid catabolism. To increase the current knowledge of GDH function, we analysed the effect of GDH silencing on liver intermediary metabolism from gilthead sea bream (Sparus aurata). Sequencing of GDH cDNA from S. aurata revealed high homology with its vertebrate orthologues and allowed us to design short hairpin RNAs (shRNAs) to knockdown GDH expression. Following validation of shRNA-dependent downregulation of S. aurata GDH in vitro, chitosan-tripolyphosphate (TPP) nanoparticles complexed with a plasmid encoding a selected shRNA (pCpG-sh2GDH) were produced to address the effect of GDH silencing on S. aurata liver metabolism. Seventy-two hours following intraperitoneal administration of chitosan-TPP-pCpG-sh2GDH, GDH mRNA levels and immunodetectable protein decreased in the liver, leading to reduced GDH activity in both oxidative and reductive reactions to about 53-55 % of control values. GDH silencing decreased glutamate, glutamine and aspartate aminotransferase activity, while increased 2-oxoglutarate content, 2-oxoglutarate dehydrogenase activity and 6-phosphofructo-1-kinase/fructose-1,6-bisphosphatase activity ratio. Our findings show for the first time that GDH silencing reduces transdeamination and gluconeogenesis in the liver, hindering the use of amino acids as gluconeogenic substrates and enabling protein sparing and metabolisation of dietary carbohydrates, which would reduce environmental impact and production costs of aquaculture.