Anna I. Sulatskaya

Fluorescence Quantum Yield of Thioflavin T in Rigid Isotropic Solution and Incorporated into the Amyloid Fibrils

In this work, the fluorescence of thioflavin T (ThT) was studied in a wide range of viscosity and temperature. It was shown that ThT fluorescence quantum yield varies from 0.0001 in water at room temperature to 0.28 in rigid isotropic solution (T/η→0). The deviation of the fluorescence quantum yield from unity in rigid isotropic solution suggests that fluorescence quantum yield depends not only on the ultra-fast oscillation of ThT fragments relative to each other in an excited state as was suggested earlier, but also depends on the molecular configuration in the ground state. This means that the fluorescence quantum yield of the dye incorporated into amyloid fibrils must depend on its conformation, which, in turn, depends on the ThT environment. Therefore, the fluorescence quantum yield of ThT incorporated into amyloid fibrils can differ from that in the rigid isotropic solution. In particular, the fluorescence quantum yield of ThT incorporated into insulin fibrils was determined to be 0.43. Consequently, the ThT fluorescence quantum yield could be used to characterize the peculiarities of the fibrillar structure, which opens some new possibilities in the ThT use for structural characterization of the amyloid fibrils.

Interaction of Thioflavin T with Amyloid Fibrils: Stoichiometry and Affinity of Dye Binding, Absorption Spectra of Bound Dye

The fluorescence of the benzothiazole dye thioflavin T (ThT) is a well-known test for amyloid fibril formation. It has now become evident that ThT can also be used for structural investigations of amyloid fibrils and even for the treatment of amyloid diseases. In this case, one of the most urgent problems is an accurate determination of ThT-amyloid fibril binding parameters: the number of binding modes, stoichiometry, and binding constant for each mode. To obtain information concerning the ThT-amyloid fibril binding parameters, we propose to use absorption spectrophotometry of solutions prepared by equilibrium microdialysis. This approach is inherently designed for the determination of dye-receptor binding parameters. However, it has been very rarely used in the study of dye-protein interactions and has never been used to study the binding parameters of ThT or its analogues to amyloid fibrils. We showed that, when done in corpore, this approach enables the determination of not only binding parameters but also the absorption spectrum and molar extinction coefficient of ThT bound to sites of different binding modes. The proposed approach was used for the examination of lysozyme amyloid fibrils. Two binding modes were found for the ThT-lysozyme amyloid fibril interaction. These binding modes have significantly different binding constants (K(b1) = 7.5 × 10(6) M(-1), K(b2) = 5.6 × 10(4) M(-1)) and a different number of dye binding sites on the amyloid fibrils per protein molecule (n(1) = 0.11, n(2) = 0.24). The absorption spectra of ThT bound to sites of different modes differ from each other (ε(b1,max) = 5.1 × 10(4) M(-1) cm(-1), ε(b2,max) = 6.7 × 10(4) M(-1)cm(-1), λ(max) = 449 nm) and significantly differ from that of free ThT in aqueous solution (ε(max) = 3.2 × 10(4) M(-1)cm(-1), λ(max) = 412 nm).

Fluorescence of dyes in solutions with high absorbance. Inner filter effect correction.

Fluorescence is a proven tool in all fields of knowledge, including biology and medicine. A significant obstacle in its use is the nonlinearity of the dependence of the fluorescence intensity on fluorophore concentration that is caused by the so-called primary inner filter effect. The existing methods for correcting the fluorescence intensity are hard to implement in practice; thus, it is generally considered best to use dilute solutions. We showed that correction must be performed always. Furthermore, high-concentration solutions (high absorbance) are inherent condition in studying of the photophysical properties of fluorescent dyes and the functionally significant interactions of biological macromolecules. We proposed an easy to use method to correct the experimentally recorded total fluorescence intensity and showed that informative component of fluorescence intensity numerically equals to the product of the absorbance and the fluorescence quantum yield of the object. It is shown that if dye molecules do not interact with each other and there is no reabsorption (as for NATA) and spectrofluorimeter provides the proportionality of the detected fluorescence intensity to the part of the absorbed light (that is possible for spectrofluorimeter with horizontal slits) then the dependence of experimentally detected total fluorescence intensity of the dye on its absorbance coincides with the calculated dependence and the correction factor for eliminating the primary inner filter effect can be calculated on the basis of solution absorbance. It was experimentally shown for NATA fluorescence in the wide range of absorbance (at least up to 60). For ATTO-425, which fluorescence and absorption spectra overlap, the elimination of the primary and secondary filter effects and additional spectral analysis allow to conclude that the most probable reason of the deviation of experimentally detected fluorescence intensity dependence on solution absorbance from the calculated dependence is the dye molecules self-quenching, which accompanies resonance radiationless excitation energy transfer.

Interaction of Thioflavin T with Amyloid Fibrils: Fluorescence Quantum Yield of Bound Dye

Benzothiazole dye thioflavin T (ThT) is a sensitive probe for amyloid fibril detection. The ThT probing is based on its unique ability to form highly fluorescent complexes with amyloid and amyloid-like fibrils. In this work we propose an approach of ThT fluorescence quantum yield determination based on two key points: (1) fluorescence intensity (I) presentation as a multiple of two factors one of which the correcting factor (W) depends only on total optical density of solution, while the other is a multiple of optical density and fluorescence quantum yield of ThT bound to amyloid fibrils or their sum in the case of several binding modes (I = W Σ D(bi)q(i)) and (2) sample and reference solutions preparation by equilibrium microdialysis. The last allows to determine the values of optical densities of free (D(f)) and bound (D(b) = ΣD(bi)) dye. Thereafter, fluorescence quantum yield (q(bi)) of ThT bound to sites of i binding mode can be determined by multiple linear regression. The fluorescence quantum yield of ThT molecules bound to the sites of two binding modes of lysozyme amyloid fibrils with high and low binding constants (7.5 × 10(6) and 5.6 × 10(4) M(-1)) was found equal to 0.44 and 5 × 10(-4), respectively. The higher value of fluorescence quantum yield is larger than that for ThT in rigid isotropic solution (0.28), whereas the lower value is comparable to that of ThT in aqueous solution (1 × 10(-4)). At the same time absorption spectra of ThT bound to these modes coincide (450 nm) and are red-shifted in comparison with that of free ThT in aqueous solution (412 nm).

Reevaluation of ANS Binding to Human and Bovine Serum Albumins: Key Role of Equilibrium Microdialysis in Ligand – Receptor Binding Characterization

In this work we return to the problem of the determination of ligand–receptor binding stoichiometry and binding constants. In many cases the ligand is a fluorescent dye which has low fluorescence quantum yield in free state but forms highly fluorescent complex with target receptor. That is why many researchers use dye fluorescence for determination of its binding parameters with receptor, but they leave out of account that fluorescence intensity is proportional to the part of the light absorbed by the solution rather than to the concentration of bound dye. We showed how ligand–receptor binding parameters can be determined by spectrophotometry of the solutions prepared by equilibrium microdialysis. We determined the binding parameters of ANS – human serum albumin (HSA) and ANS – bovine serum albumin (BSA) interaction, absorption spectra, concentration and molar extinction coefficient, as well as fluorescence quantum yield of the bound dye. It was found that HSA and BSA have two binding modes with significantly different affinity to ANS. Correct determination of the binding parameters of ligand–receptor interaction is important for fundamental investigations and practical aspects of molecule medicine and pharmaceutics. The data obtained for albumins are important in connection with their role as drugs transporters.

Analyzing Thioflavin T Binding to Amyloid Fibrils by an Equilibrium Microdialysis-Based Technique

A new approach for the determination of the amyloid fibril – thioflavin T (ThT) binding parameters (the number of binding modes, stoichiometry, and binding constants of each mode) is proposed. This approach is based on the absorption spectroscopy determination of the concentration of free and bound to fibril dye in solutions, which are prepared by equilibrium microdialysis. Furthermore, the proposed approach allowed us, for the first time, to determine the absorption spectrum, molar extinction coefficient, and fluorescence quantum yield of the ThT bound to fibril by each binding modes. This approach is universal and can be used for determining the binding parameters of any dye interaction with a receptor, such as ANS binding to proteins in the molten globule state or to protein amorphous aggregates.

A new trend in the experimental methodology for the analysis of the thioflavin T binding to amyloid fibrils.

The studies on the determination of the characteristics of the amyloid fibril interaction with the dye were based on the analysis of the dependence of the ThT fluorescence intensity on its concentration in the solution containing the amyloid fibrils. In the present work, we revealed that this intuitive approach provided erroneous data. We propose a new approach which provides a means for characterizing the interaction of thioflavin T (ThT) with amyloid fibrils and for determining the binding stoichiometry and binding constants, absorption spectrum, molar extinction coefficient, and fluorescence quantum yield of the ThT bound to the sites of different binding modes of fibrils. The key point of this approach is sample preparation by equilibrium microdialysis. The efficiency of the proposed approach is demonstrated via the examination of the ThT binding to insulin and Aβ42 fibrils as well as to the native form of the Electrophorus electricus acetylcholinesterase. We show that the peculiarities of ThT interaction with amyloid fibrils depend on the amyloidogenic protein and on the binding mode. This approach is universal and can be used for the analysis of binding mechanism of any dye that interacts with its receptor. Therefore, the proposed approach represents an important addition to the existing arsenal of means for the diagnostics and therapy of the neurodegenerative diseases.

High Fluorescence Anisotropy of Thioflavin T in Aqueous Solution Resulting from Its Molecular Rotor Nature

Thioflavin T (ThT) is widely used to study amyloid fibrils while its properties are still debated in the literature. By steady-state and femtosecond time-resolved fluorescence we showed that, unlike small sized rigid molecules, the fluorescence anisotropy value of the free ThT in aqueous solutions is very high, close to the limiting value. This is determined by the molecular rotor nature of ThT, where the direction of the ThT transition dipole moment S₀ → S₁* is not changed either by the internal rotation of the ThT benzothiazole and aminobenzene rings relative to each other in the excited state, because the axis of this rotation coincides with the direction of the transition dipole moment, or by the rotation of the ThT molecule as a whole, because the rate of this process is 3 orders of magnitude smaller than the rate of the internal rotation which leads to the fluorescence quenching. Consequently, ThT fluorescence anisotropy cannot be directly used to study amyloid fibrils formation, as it was proposed by some authors.

Protein unfolding in crowded milieu: what crowding can do to a protein undergoing unfolding?

The natural environment of a protein inside a cell is characterized by the almost complete lack of unoccupied space, limited amount of free water, and the tightly packed crowd of various biological macromolecules, such as proteins, nucleic acids, polysaccharides, and complexes thereof. This extremely crowded natural milieu is poorly mimicked by slightly salted aqueous solutions containing low concentrations of a protein of interest. The accepted practice is to model crowded environments by adding high concentrations of various polymers that serve as model “crowding agents” to the solution of a protein of interest. Although studies performed under these model conditions revealed that macromolecular crowding might have noticeable influence on various aspects related to the protein structure, function, folding, conformational stability, and aggregation propensity, the complete picture describing conformational behavior of a protein under these conditions is missing as of yet. Furthermore, there is an accepted belief that the conformational stability of globular proteins increases in the presence crowding agents due to the excluded volume effects. The goal of this study was to conduct a systematic analysis of the effect of high concentrations of PEG-8000 and Dextran-70 on the unfolding behavior of eleven globular proteins belonging to different structural classes.

Binding stoichiometry and affinity of fluorescent dyes to proteins in different structural states

Protocol of determination of binding stoichiometry and affinity of fluorescent dyes with proteins in different structural states is proposed. The proposed approach is based on the spectrophotometric determination of concentrations of dye bound to protein and free dye in solutions prepared by equilibrium microdialysis. This technique allows also determining spectral properties of the bound dyes. The restrictions of the use of dye fluorescence intensity for characterization of its interaction with the target protein are discussed. It is shown that the dependence of the dye fluorescence intensity on its optical density together with the data on its binding parameter can give information about the dye fluorescence quantum yield. All procedures are illustrated by interaction of 8-anilino-1-naphthalenesulfonate (ANS) with bovine serum albumin.