Anna Mazhorova

Suspended core subwavelength fibers: towards practical designs for low-loss terahertz guidance

In this work we report two designs of subwavelength fibers packaged for practical terahertz wave guiding. We describe fabrication, modeling and characterization of microstructured polymer fibers featuring a subwavelength-size core suspended in the middle of a large porous outer cladding. This design allows convenient handling of the subwavelength fibers without distorting their modal profile. Additionally, the air-tight porous cladding serves as a natural enclosure for the fiber core, thus avoiding the need for a bulky external enclosure for humidity-purged atmosphere. Fibers of 5 mm and 3 mm in outer diameters with a 150 µm suspended solid core and a 900 µm suspended porous core respectively, were obtained by utilizing a combination of drilling and stacking techniques. Characterization of the fiber optical properties and the subwavelength imaging of the guided modes were performed using a terahertz near-field microscopy setup. Near-field imaging of the modal profiles at the fiber output confirmed the effectively single-mode behavior of such waveguides. The suspended core fibers exhibit transmission from 0.10 THz to 0.27 THz (larger core), and from 0.25 THz to 0.51 THz (smaller core). Due to the large fraction of power that is guided in the holey cladding, fiber propagation losses as low as 0.02 cm(-1) are demonstrated specifically for the small core fiber. Low-loss guidance combined with the core isolated from environmental perturbations make these all-dielectric fibers suitable for practical terahertz imaging and sensing applications.

Polymer microstructured optical fibers for terahertz wave guiding

We outline the most recent technological advancements in the design, fabrication and characterization of polymer microstructured optical fibers (MOFs) for applications in the terahertz waveband. Focusing on specific experimental demonstrations, we show that polymer optical fibers provide a very flexible route towards THz wave guiding. Crucial incentives include the large variety of the low-cost and relatively low absorption loss polymers, the facile fiber preform fabrication by molding, drilling, stacking and extrusion, and finally, the simple fabrication through fiber drawing at low forming temperatures.

Label-free bacteria detection using evanescent mode of a suspended core terahertz fiber

We propose for the first time an E. coli bacteria sensor based on the evanescent field of the fundamental mode of a suspended-core terahertz fiber. The sensor is capable of E. coli detection at concentrations in the range of 104-109 cfu/ml. The polyethylene fiber features a 150 μm core suspended by three deeply sub-wavelength bridges in the center of a 5.1 mm-diameter cladding tube. The fiber core is biofunctionalized with T4 bacteriophages which bind and eventually destroy (lyse) their bacterial target. Using environmental SEM we demonstrate that E. coli is first captured by the phages on the fiber surface. After 25 minutes, most of the bacteria is infected by phages and then destroyed with ~1μm-size fragments remaining bound to the fiber surface. The bacteria-binding and subsequent lysis unambiguously correlate with a strong increase of the fiber absorption. This signal allows the detection and quantification of bacteria concentration. Presented bacteria detection method is label-free and it does not rely on the presence of any bacterial “fingerprint” features in the THz spectrum.

Spectral characterization of porous dielectric subwavelength THz fibers fabricated using a microstructured molding technique

We report two novel fabrication techniques, as well as THz spectral transmission and propagation loss measurements of subwavelength plastic wires with highly porous (up to 86%) and non-porous transverse geometries. The two fabrication techniques we describe are based on the microstructured molding approach. In one technique the mold is made completely from silica by stacking and fusing silica capillaries to the bottom of a silica ampoule. The melted material is then poured into the silica mold to cast the microstructured preform. Another approach uses a microstructured mold made of a sacrificial plastic which is co-drawn with a cast preform. Material from the sacrificial mold is then dissolved after fi ber drawing. We also describe a novel THz-TDS setup with an easily adjustable optical path length, designed to perform cutback measurements using THz fibers of up to 50 cm in length. We fi nd that while both porous and non-porous subwavelength fibers of the same outside diameter have low propagation losses (alpha <or= 0.02 cm(-1)), the porous fi bers exhibit a much wider spectral transmission window and enable transmission at higher frequencies compared to the non-porous fibers. We then show that the typical bell-shaped transmission spectra of the subwavelengths fibers can be very well explained by the onset of material absorption loss at higher frequencies, due to strong confinement of the modal fields in the material region of the fi ber, as well as strong coupling loss at lower frequencies, due to mismatch between the modal field diameter and the size of the gaussian-like beam of a THz source.

Composite THz materials using aligned metallic and semiconductor microwires, experiments and interpretation

We report fabrication method and THz characterization of composite films containing either aligned metallic (tin alloy) microwires or chalcogenide As2Se3 microwires. The microwire arrays are made by stack-and-draw fiber fabrication technique using multi-step co-drawing of low-melting-temperature metals or semiconductor glasses together with polymers. Fibers are then stacked together and pressed into composite films. Transmission through metamaterial films is studied in the whole THz range (0.1-20 THz) using a combination of FTIR and TDS. Metal containing metamaterials are found to have strong polarizing properties, while semiconductor containing materials are polarization independent and could have a designable high refractive index. Using the transfer matrix theory, we show how to retrieve the complex polarization dependent refractive index of the composite films. Finally, we study challenges in the fabrication of metamaterials with sub-micrometer metallic wires by repeated stack-and-draw process by comparing samples made using 2, 3 and 4 consecutive drawings. When using metallic alloys we observe phase separation effects and nano-grids formation on small metallic wires.

Terahertz Faraday rotation in a magnetic liquid: High magneto-optical figure of merit and broadband operation in a ferrofluid

We report on the demonstration of a high figure of merit (FOM) Faraday rotation in a liquid in the terahertz (THz) regime. Using a ferrofluid, a high broadband rotation (11 mrad/mm) is experimentally demonstrated in the frequency range of 0.2–0.9 THz at room temperature. Given the low absorption of the liquid, a high magneto-optical figure of merit (5-16 rad.cm/T) is obtained.

Planar Porous THz Waveguides for Low-Loss Guidance and Sensing Applications

Planar porous dielectric waveguides featuring periodic sequence of deeply subwavelength air/dielectric bi-layers are proposed, fabricated and characterized in view of their potential applications as low-loss waveguides and sensors in the THz spectral range. The waveguide design maximizes the fraction of power guided in the air to reduce waveguide loss due to material absorption, as well as to provide a conveniently accessible microfluidic channels for sensor measurements.

Active terahertz two-wire waveguides

Increasing coupling of terahertz radiation into a low dispersion, broadband two-wire waveguide is an important issue to address. To resolve this, we demonstrate an active two-wire waveguide with higher performance compared to its passive counterpart.

THz metamaterials using aligned metallic or semiconductor nanowires

We study the transmission of THz radiation through the metamaterial films containing metallic or semiconductor nanowires. The nanowire arrays are made by the stack-and-draw fiber fabrication technique. Metal embedded films exhibit strong polarizing properties, in contrast with those containing semiconductor.

Solid-state-biased coherent detection of ultra-broadband terahertz pulses

Significant progress in nonlinear and ultrafast optics has recently opened new and exciting opportunities for terahertz (THz) science and technology, which require the development of reliable THz sources, detectors, and supporting devices. In this work, we demonstrate the first solid-state technique for the coherent detection of ultra-broadband THz pulses (0.1–10 THz), relying on the electric-field-induced second-harmonic generation in a thin layer of ultraviolet fused silica. The proposed CMOS-compatible devices, which can be realized with standard microfabrication techniques, allow us to perform ultra-broadband detection with a high dynamic range by employing probe laser powers and bias voltages much lower than those used in gas-based techniques. Eventually, this may pave the way for the use of high-repetition-rate ultrafast lasers and commercially available electronics for the coherent detection of ultrashort THz pulses.