Armin Neitzel

The Mechanism of Hydrocarbon Oxygenate Reforming: CC Bond Scission, Carbon Formation, and Noble-Metal-Free Oxide Catalysts

Towards a molecular understanding of the mechanism behind catalytic reforming of bioderived hydrocarbon oxygenates, we explore the C-C bond scission of C2 model compounds (acetic acid, ethanol, ethylene glycol) on ceria model catalysts of different complexity, with and without platinum. Synchrotron photoelectron spectroscopy reveals that the reaction pathway depends very specifically on both the reactant molecule and the catalyst surface. Whereas C-C bond scission on Pt sites and on oxygen vacancies involves intermittent surface carbon species, the reaction occurs without any carbon formation and deposition for ethylene glycol on CeO2(111).

Atomic Ordering and Sn Segregation in Pt–Sn Nanoalloys Supported on CeO2 Thin Films

The stability and atomic ordering in Pt–Sn nanoalloys supported on CeO2 thin films have been studied by means of synchrotron radiation photoelectron spectroscopy and density functional calculations. Using CO molecules as a probe, we explored the development of the surface structure of supported Pt–Sn nanoalloys with respect to a reference Pt/CeO2 model system. We found a significant decrease in the density of CO adsorption sites on supported Pt–Sn nanoalloys caused by Sn segregation to the surface upon annealing. Additionally, we found that atomic ordering in Pt–Sn nanoalloys is driven by the balance between the surface segregation energy of Sn atoms and the energy of heteroatomic bond formation. Our calculations demonstrate a clear tendency for Sn segregation to the nanoalloy surface. For Pt105Sn35 and Pt1097Sn386 nanoparticles, we calculated a surface stoichiometry of Pt2Sn which is only slightly dependent on temperature in thermodynamic equilibrium. The analysis of Bader charges in Pt–Sn nanoalloys revealed a strong correlation between the charge and the coordination number of Sn atoms with respect to Pt neighbors. In particular, the magnitude of the charge transfer from Sn to Pt increases as a function of the Sn coordination number.

Redox-mediated conversion of atomically dispersed platinum to sub-nanometer particles

The stability and the conversion of atomically dispersed Pt2+ species to sub-nanometer Pt particles have been investigated as a function of the Sn concentration in Pt–CeO2 films by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, and angle-resolved X-ray photoelectron spectroscopy in combination with density functional calculations. The deposition of Sn onto the Pt–CeO2 films triggers the reduction of Ce4+ cations to Ce3+ yielding Sn2+ cations. Consecutively, the redox coupling between the Ce3+ and Pt2+ species triggers the reduction of Pt2+ species yielding sub-nanometer Pt particles. The onset of reduction of Pt2+ species is directly related to the concentration of Ce3+ centers which, in turn, is controlled by the concentration of Sn2+ cations in the Pt–CeO2 film. On average, the formation of 6Ce3+ centers corresponding to the adsorption of 3Sn atoms gives rise to the reduction of one Pt2+ species. The analysis of the depth distribution of Sn atoms in the Pt–CeO2 films revealed preferential adsorption of Sn2+ at the surface followed by diffusion of Sn2+ ions into the bulk at higher Sn coverages. Density functional modeling suggested that the adsorption of three Sn atoms in the vicinity of the Pt2+ species results in a rearrangement of the local coordination accompanied by substantial destabilization of the Pt2+ species followed by its conversion to Pt0 atoms. The formation of sub-nanometer Pt particles is coupled with re-oxidation of two Ce3+ centers per one Pt2+ species reduced. Annealing of the Pt–CeO2 films in the presence of metallic Sn also leads to the reduction of the Pt2+ species due to thermally triggered oxidation of metallic Sn residues followed by diffusion of Sn2+ into the bulk. Annealing of the Pt–CeO2 films to temperatures above 600 K results in a loss of Sn yielding sub-nanometer Pt particles supported on nearly stoichiometric and Sn-free CeO2 films.

Steering the formation of supported Pt–Sn nanoalloys by reactive metal–oxide interaction

The formation of a supported Pt–Sn nanoalloy upon reactive metal–oxide interaction between Pt nanoparticles and a Sn–CeO2 substrate has been investigated by means of synchrotron radiation photoelectron spectroscopy and resonant photoemission spectroscopy in combination with density functional modeling. It was found that Pt deposition onto a Sn–CeO2 substrate triggers the reduction of Sn2+ cations yielding Pt–Sn nanoalloys at 300 K under ultra-high vacuum conditions. Three distinct stages of Pt–Sn nanoalloy formation were identified associated with the growth of (I) ultra-small monometallic Pt particles on a Sn–CeO2 substrate, (II) Pt–Sn nanoalloys on a Sn–CeO2 substrate, and (III) Pt–Sn nanoalloys on a stoichiometric CeO2 substrate. These findings suggest the existence of a critical size of monometallic Pt particles above which the formation of a Pt–Sn nanoalloy becomes favorable. In this respect, density functional modeling revealed a strong dependence of the formation energy of the PtxSn nanoalloy on the size of the Pt particle. Additionally, the thermodynamically favorable bulk and surface Pt/Sn stoichiometries were identified as two parameters that determine the composition of the supported Pt–Sn nanoalloys and limit the extraction of Sn2+ from the Sn–CeO2 substrate. Primarily, the formation of a bulk Pt3Sn alloy phase drives the growth of the Pt–Sn nanoalloy upon Pt deposition at 300 K. Upon annealing, Sn segregation on the surface of the Pt–Sn nanoalloy promotes further extraction of Sn2+ until the thermodynamically stable Pt/Sn concentration ratios of 3 for the bulk and approximately 1.6 for the surface are reached.

Electrifying model catalysts for understanding electrocatalytic reactions in liquid electrolytes

Electrocatalysis is at the heart of our future transition to a renewable energy system. Most energy storage and conversion technologies for renewables rely on electrocatalytic processes and, with increasing availability of cheap electrical energy from renewables, chemical production will witness electrification in the near future1–3. However, our fundamental understanding of electrocatalysis lags behind the field of classical heterogeneous catalysis that has been the dominating chemical technology for a long time. Here, we describe a new strategy to advance fundamental studies on electrocatalytic materials. We propose to ‘electrify’ complex oxide-based model catalysts made by surface science methods to explore electrocatalytic reactions in liquid electrolytes. We demonstrate the feasibility of this concept by transferring an atomically defined platinum/cobalt oxide model catalyst into the electrochemical environment while preserving its atomic surface structure. Using this approach, we explore particle size effects and identify hitherto unknown metal–support interactions that stabilize oxidized platinum at the nanoparticle interface. The metal–support interactions open a new synergistic reaction pathway that involves both metallic and oxidized platinum. Our results illustrate the potential of the concept, which makes available a systematic approach to build atomically defined model electrodes for fundamental electrocatalytic studies.Fundamental understanding of electrocatalysis is key to a transition to renewable energy systems. A strategy to ‘electrify’ complex oxide-based model catalysts is now proposed to explore electrocatalytic reactions in liquid electrolytes.