Armin Wagner

Suppression of 4-coumarate-CoA ligase in the coniferous gymnosperm Pinus radiata.

Severe suppression of 4-coumarate-coenzyme A ligase (4CL) in the coniferous gymnosperm Pinus radiata substantially affected plant phenotype and resulted in dwarfed plants with a “bonsai tree-like” appearance. Microscopic analyses of stem sections from 2-year-old plants revealed substantial morphological changes in both wood and bark tissues. This included the formation of weakly lignified tracheids that displayed signs of collapse and the development of circumferential bands of axial parenchyma. Acetyl bromide-soluble lignin assays and proton nuclear magnetic resonance studies revealed lignin reductions of 36% to 50% in the most severely affected transgenic plants. Two-dimensional nuclear magnetic resonance and pyrolysis-gas chromatography-mass spectrometry studies indicated that lignin reductions were mainly due to depletion of guaiacyl but not p-hydroxyphenyl lignin. 4CL silencing also caused modifications in the lignin interunit linkage distribution, including elevated β-aryl ether (β-O-4 unit) and spirodienone (β-1) levels, accompanied by lower phenylcoumaran (β-5), resinol (β-β), and dibenzodioxocin (5-5/β-O-4) levels. A sharp depletion in the level of saturated (dihydroconiferyl alcohol) end groups was also observed. Severe suppression of 4CL also affected carbohydrate metabolism. Most obvious was an up to approximately 2-fold increase in galactose content in wood from transgenic plants due to increased compression wood formation. The molecular, anatomical, and analytical data verified that the isolated 4CL clone is associated with lignin biosynthesis and illustrated that 4CL silencing leads to complex, often surprising, physiological and morphological changes in P. radiata.

Syringyl lignin production in conifers: Proof of concept in a Pine tracheary element system.

Significance This study shows that metabolic engineering can be used to imbue pine tracheary elements with an ability to synthesize sinapyl alcohol, a lignin monomer not normally used for lignification in conifers such as pine. The dynamic nature of the lignification process enables pines to incorporate this monolignol, allowing them to produce hardwood-like lignins that are known to facilitate refining processes such as biofuel production and chemical pulping. The potential to improve the refining of conifer-derived biomass through lignin manipulations is important, as even small improvements in yield can lead to significant environmental and economic benefits in such processes. Conifers (softwoods) naturally lack syringyl units in their lignins, rendering lignocellulosic materials from such species more difficult to process than syringyl-rich hardwood species. Using a transformable Pinus radiata tracheary element (TE) system as an experimental platform, we investigated whether metabolic engineering can be used to create syringyl lignin in conifers. Pyrolysis-GC/MS and 2D-NMR analysis of P. radiata TE cultures transformed to express ferulate 5-hydroxylase (F5H) and caffeic acid O-methyltransferase (COMT) from Liquidambar styraciflua confirmed the production and incorporation of sinapyl alcohol into the lignin polymer. Transformation with F5H was sufficient for the production of syringyl lignin in TEs, but cotransformation with COMT improved its formation. In addition, lower levels of the pathway intermediate 5-hydroxyconiferyl alcohol were evidenced in cotransformation experiments, indicating that the introduction of the COMT overcame the inefficiency of the native pine methyltransferases for supporting sinapyl alcohol production.Our results provide the proof of concept that it is possible to generate a lignin polymer that contains syringyl units in softwood species such as P. radiata, suggesting that it might be possible to retain the outstanding fiber properties of softwoods while imbuing them with the lignin characteristics of hardwoods that are more favorable for industrial processing.

Visualization of plant cell wall lignification using fluorescence‐tagged monolignols

Lignin is an abundant phenylpropanoid polymer produced by the oxidative polymerization of p-hydroxycinnamyl alcohols (monolignols). Lignification, i.e., deposition of lignin, is a defining feature of secondary cell wall formation in vascular plants, and provides an important mechanism for their disease resistance; however, many aspects of the cell wall lignification process remain unclear partly because of a lack of suitable imaging methods to monitor the process in vivo. In this study, a set of monolignol analogs γ-linked to fluorogenic aminocoumarin and nitrobenzofuran dyes were synthesized and tested as imaging probes to visualize the cell wall lignification process in Arabidopsis thaliana and Pinus radiata under various feeding regimens. In particular, we demonstrate that the fluorescence-tagged monolignol analogs can penetrate into live plant tissues and cells, and appear to be metabolically incorporated into lignifying cell walls in a highly specific manner. The localization of the fluorogenic lignins synthesized during the feeding period can be readily visualized by fluorescence microscopy and is distinguishable from the other wall components such as polysaccharides as well as the pre-existing lignin that was deposited earlier in development.

Potential transgenic routes to increase tree biomass

Biomass is a prime target for genetic engineering in forestry because increased biomass yield will benefit most downstream applications such as timber, fiber, pulp, paper, and bioenergy production. Transgenesis can increase biomass by improving resource acquisition and product utilization and by enhancing competitive ability for solar energy, water, and mineral nutrients. Transgenes that affect juvenility, winter dormancy, and flowering have been shown to influence biomass as well. Transgenic approaches have increased yield potential by mitigating the adverse effects of prevailing stress factors in the environment. Simultaneous introduction of multiple genes for resistance to various stress factors into trees may help forest trees cope with multiple or changing environments. We propose multi-trait engineering for tree crops, simultaneously deploying multiple independent genes to address a set of genetically uncorrelated traits that are important for crop improvement. This strategy increases the probability of unpredictable (synergistic or detrimental) interactions that may substantially affect the overall phenotype and its long-term performance. The very limited ability to predict the physiological processes that may be impacted by such a strategy requires vigilance and care during implementation. Hence, we recommend close monitoring of the resultant transgenic genotypes in multi-year, multi-location field trials.

Suppression of CCR impacts metabolite profile and cell wall composition in Pinus radiata tracheary elements

Suppression of the lignin-related gene cinnamoyl-CoA reductase (CCR) in the Pinus radiata tracheary element (TE) system impacted both the metabolite profile and the cell wall matrix in CCR-RNAi lines. UPLC–MS/MS-based metabolite profiling identified elevated levels of p-coumaroyl hexose, caffeic acid hexoside and ferulic acid hexoside in CCR-RNAi lines, indicating a redirection of metabolite flow within phenylpropanoid metabolism. Dilignols derived from coniferyl alcohol such as G(8-5)G, G(8-O-4)G and isodihydrodehydrodiconiferyl alcohol (IDDDC) were substantially depleted, providing evidence for CCR’s involvement in coniferyl alcohol biosynthesis. Severe CCR suppression almost halved lignin content in TEs based on a depletion of both H-type and G-type lignin, providing evidence for CCR’s involvement in the biosynthesis of both lignin types. 2D-NMR studies revealed minor changes in the H:G-ratio and consequently a largely unchanged interunit linkage distribution in the lignin polymer. However, unusual cell wall components including ferulate and unsaturated fatty acids were identified in TEs by thioacidolysis, pyrolysis-GC/MS and/or 2D-NMR in CCR-RNAi lines, providing new insights into the consequences of CCR suppression in pine. Interestingly, CCR suppression substantially promoted pyrolytic breakdown of cell wall polysaccharides, a phenotype most likely caused by the incorporation of acidic compounds into the cell wall matrix in CCR-RNAi lines.

Lignification and Lignin Manipulations in Conifers

Lignification is integral to wood formation and has been studied in great detail in conifers for decades. This effort has resulted in detailed knowledge about the chemical composition, structure and content of lignin in different cell and wood types. Lignin distribution and biochemical composition has been resolved at an ultra-structural level, and structural models for conifer lignin have been established. Recent years have seen significant advances in our molecular-level understanding of lignification, and in conifer monolignol biosynthesis. The majority of the genes involved have been identified and the molecular functions of several have been experimentally verified. Suppression of lignin-related genes confirmed that lignin is vital for plant fitness and vascular integrity in conifers and established that conifers do not tolerate substantial reductions in lignin content. Significant gaps in our understanding of conifer lignification nevertheless remain. Aspects of lignification about which we still know relatively little include: the regulatory cascades that trigger lignification, metabolic connections between monolignol biosynthesis and other metabolic processes, the cellular biology of monolignol biosynthesis, the transport of monolignols to the apoplast, the role of monolignol glucosides in lignification, the process of lignin initiation, and the interaction of lignin with other cell wall polymers such as non-cellulosic polysaccharides. These significant gaps in our understanding provide ample opportunity for new and exciting discoveries on lignification in conifers.

Proteomic analysis of membrane preparations from developing Pinus radiata compression wood.

For coniferous gymnosperms, few data exist as to the contribution of the membrane-associated proteome to cell wall and wood formation. In this study, we begin to address this knowledge deficiency by examining the proteomic profile of Golgi-enriched membrane preparations derived from developing Pinus radiata compression wood. These membrane preparations were generated by a combination of discontinuous sucrose gradient centrifugation and Triton X-114-based phase separation. Fractionation by phase separation removed contaminating proteins associated with the cytoskeleton and enabled the discrimination between soluble and membrane-bound/integral proteins. The proteomic analysis of the resulting aqueous and detergent phases using high-performance liquid chromatography-tandem mass spectrometry resulted in the identification of 175 proteins. The majority of the identified proteins were membrane bound/integral and originated from cellular components such as the nucleus, plastids, endoplasmic reticulum, plasma membrane and Golgi vesicles. On the basis of bioinformatic analysis, many of the identified proteins were predicted to be involved either in the regulation of wood formation or in cell wall biosynthesis, which indicated that the proteomic analysis of non-cytosolic proteins in developing xylem is a useful strategy to investigate the molecular aspects of wood formation in pine.

Golgi Enrichment and Proteomic Analysis of Developing Pinus radiata Xylem by Free-Flow Electrophoresis

Our understanding of the contribution of Golgi proteins to cell wall and wood formation in any woody plant species is limited. Currently, little Golgi proteomics data exists for wood-forming tissues. In this study, we attempted to address this issue by generating and analyzing Golgi-enriched membrane preparations from developing xylem of compression wood from the conifer Pinus radiata. Developing xylem samples from 3-year-old pine trees were harvested for this purpose at a time of active growth and subjected to a combination of density centrifugation followed by free flow electrophoresis, a surface charge separation technique used in the enrichment of Golgi membranes. This combination of techniques was successful in achieving an approximately 200-fold increase in the activity of the Golgi marker galactan synthase and represents a significant improvement for proteomic analyses of the Golgi from conifers. A total of thirty known Golgi proteins were identified by mass spectrometry including glycosyltransferases from gene families involved in glucomannan and glucuronoxylan biosynthesis. The free flow electrophoresis fractions of enriched Golgi were highly abundant in structural proteins (actin and tubulin) indicating a role for the cytoskeleton during compression wood formation. The mass spectrometry proteomics data associated with this study have been deposited to the ProteomeXchange with identifier PXD000557.

Metabolic Engineering of Wood Formation

Wood is one of the most abundant composite materials on earth consisting primarily of cellulose, noncellulosic polysaccharides and lignin. It is a sustainable and quite versatile natural resource that can be processed into many useful products including biofuels, biochemicals, wood pellets, pulp and paper, fibres, biocomposites and timber. Transgenic studies targeting wood formation have in the past largely been of exploratory nature to better understand the molecular basis of wood formation. However, metabolic engineering approaches of woody biomass designed to enhance the quality and quantity of desired end products started to emerge in recent years. A substantial number of studies have recently been published on improving the generation of bioenergy or biofuels from lignocellulosic material, reflecting this new trend in the utilization of woody biomass. A sizable body of literature also exists on metabolic engineering strategies designed to improve the production of pulp and paper, which are important traditional products derived from lignocellulosic material. All these product streams are influenced by the structure and content of cell wall polymers that constitute wood, justifying the current research effort on this topic. Metabolic engineering experiments trying to increase the formation of woody biomass itself have also gained momentum in recent years. Metabolic engineering strategies designed to improve the quality of wood or to enhance the production of nontraditional bioproducts from wood seem also to be feasible but have received little attention to date. This might in part reflect our insufficient knowledge on biochemical and cellular processes that govern wood formation.