Timothy J. Strabala

Potential transgenic routes to increase tree biomass

Biomass is a prime target for genetic engineering in forestry because increased biomass yield will benefit most downstream applications such as timber, fiber, pulp, paper, and bioenergy production. Transgenesis can increase biomass by improving resource acquisition and product utilization and by enhancing competitive ability for solar energy, water, and mineral nutrients. Transgenes that affect juvenility, winter dormancy, and flowering have been shown to influence biomass as well. Transgenic approaches have increased yield potential by mitigating the adverse effects of prevailing stress factors in the environment. Simultaneous introduction of multiple genes for resistance to various stress factors into trees may help forest trees cope with multiple or changing environments. We propose multi-trait engineering for tree crops, simultaneously deploying multiple independent genes to address a set of genetically uncorrelated traits that are important for crop improvement. This strategy increases the probability of unpredictable (synergistic or detrimental) interactions that may substantially affect the overall phenotype and its long-term performance. The very limited ability to predict the physiological processes that may be impacted by such a strategy requires vigilance and care during implementation. Hence, we recommend close monitoring of the resultant transgenic genotypes in multi-year, multi-location field trials.

Exploring the Ultrastructural Localization and Biosynthesis of β(1,4)-Galactan in Pinus radiata Compression Wood

Softwood species such as pines react to gravitropic stimuli by producing compression wood, which unlike normal wood contains significant amounts of β(1,4)-galactan. Currently, little is known regarding the biosynthesis or physiological function of this polymer or the regulation of its deposition. The subcellular location of β(1,4)-galactan in developing tracheids was investigated in Pinus radiata D. Don using anti-β(1,4)-galactan antibodies to gain insight into its possible physiological role in compression wood. β(1,4)-Galactan was prominent and evenly distributed throughout the S2 layer of developing tracheid cell walls in P. radiata compression wood. In contrast, β(1,4)-galactan was not detected in normal wood. Greatly reduced antibody labeling was observed in fully lignified compression wood tracheids, implying that lignification results in masking of the epitope. To begin to understand the biosynthesis of galactan and its regulation, an assay was developed to monitor the enzyme that elongates the β(1,4)-galactan backbone in pine. A β(1,4)-galactosyltransferase (GalT) activity capable of extending 2-aminopyridine-labeled galacto-oligosaccharides was found to be associated with microsomes. Digestion of the enzymatic products using a β(1,4)-specific endogalactanase confirmed the production of β(1,4)-galactan by this enzyme. This GalT activity was substantially higher in compression wood relative to normal wood. Characterization of the identified pine GalT enzyme activity revealed pH and temperature optima of 7.0 and 20°C, respectively. The β(1,4)-galactan produced by the pine GalT had a higher degree of polymerization than most pectic galactans found in angiosperms. This observation is consistent with the high degree of polymerization of the naturally occurring β(1,4)-galactan in pine.

Proteomic analysis of membrane preparations from developing Pinus radiata compression wood.

For coniferous gymnosperms, few data exist as to the contribution of the membrane-associated proteome to cell wall and wood formation. In this study, we begin to address this knowledge deficiency by examining the proteomic profile of Golgi-enriched membrane preparations derived from developing Pinus radiata compression wood. These membrane preparations were generated by a combination of discontinuous sucrose gradient centrifugation and Triton X-114-based phase separation. Fractionation by phase separation removed contaminating proteins associated with the cytoskeleton and enabled the discrimination between soluble and membrane-bound/integral proteins. The proteomic analysis of the resulting aqueous and detergent phases using high-performance liquid chromatography-tandem mass spectrometry resulted in the identification of 175 proteins. The majority of the identified proteins were membrane bound/integral and originated from cellular components such as the nucleus, plastids, endoplasmic reticulum, plasma membrane and Golgi vesicles. On the basis of bioinformatic analysis, many of the identified proteins were predicted to be involved either in the regulation of wood formation or in cell wall biosynthesis, which indicated that the proteomic analysis of non-cytosolic proteins in developing xylem is a useful strategy to investigate the molecular aspects of wood formation in pine.

Bioinformatic and phylogenetic analysis of the CLAVATA3/EMBRYO-SURROUNDING REGION (CLE) and the CLE-LIKE signal peptide genes in the Pinophyta

BackgroundThere is a rapidly growing awareness that plant peptide signalling molecules are numerous and varied and they are known to play fundamental roles in angiosperm plant growth and development. Two closely related peptide signalling molecule families are the CLAVATA3-EMBRYO-SURROUNDING REGION (CLE) and CLE-LIKE (CLEL) genes, which encode precursors of secreted peptide ligands that have roles in meristem maintenance and root gravitropism. Progress in peptide signalling molecule research in gymnosperms has lagged behind that of angiosperms. We therefore sought to identify CLE and CLEL genes in gymnosperms and conduct a comparative analysis of these gene families with angiosperms.ResultsWe undertook a meta-analysis of the GenBank/EMBL/DDBJ gymnosperm EST database and the Picea abies and P. glauca genomes and identified 93 putative CLE genes and 11 CLEL genes among eight Pinophyta species, in the genera Cryptomeria, Pinus and Picea. The predicted conifer CLE and CLEL protein sequences had close phylogenetic relationships with their homologues in Arabidopsis. Notably, perfect conservation of the active CLE dodecapeptide in presumed orthologues of the Arabidopsis CLE41/44-TRACHEARY ELEMENT DIFFERENTIATION (TDIF) protein, an inhibitor of tracheary element (xylem) differentiation, was seen in all eight conifer species. We cloned the Pinus radiata CLE41/44-TDIF orthologues. These genes were preferentially expressed in phloem in planta as expected, but unexpectedly, also in differentiating tracheary element (TE) cultures. Surprisingly, transcript abundances of these TE differentiation-inhibitors sharply increased during early TE differentiation, suggesting that some cells differentiate into phloem cells in addition to TEs in these cultures. Applied CLE13 and CLE41/44 peptides inhibited root elongation in Pinus radiata seedlings. We show evidence that two CLEL genes are alternatively spliced via 3′-terminal acceptor exons encoding separate CLEL peptides.ConclusionsThe CLE and CLEL genes are found in conifers and they exhibit at least as much sequence diversity in these species as they do in other plant species. Only one CLE peptide sequence has been 100% conserved between gymnosperms and angiosperms over 300 million years of evolutionary history, the CLE41/44-TDIF peptide and its likely conifer orthologues. The preferential expression of these vascular development-regulating genes in phloem in conifers, as they are in dicot species, suggests close parallels in the regulation of secondary growth and wood formation in gymnosperm and dicot plants. Based on our bioinformatic analysis, we predict a novel mechanism of regulation of the expression of several conifer CLEL peptides, via alternative splicing resulting in the selection of alternative C-terminal exons encoding separate CLEL peptides.

Golgi Enrichment and Proteomic Analysis of Developing Pinus radiata Xylem by Free-Flow Electrophoresis

Our understanding of the contribution of Golgi proteins to cell wall and wood formation in any woody plant species is limited. Currently, little Golgi proteomics data exists for wood-forming tissues. In this study, we attempted to address this issue by generating and analyzing Golgi-enriched membrane preparations from developing xylem of compression wood from the conifer Pinus radiata. Developing xylem samples from 3-year-old pine trees were harvested for this purpose at a time of active growth and subjected to a combination of density centrifugation followed by free flow electrophoresis, a surface charge separation technique used in the enrichment of Golgi membranes. This combination of techniques was successful in achieving an approximately 200-fold increase in the activity of the Golgi marker galactan synthase and represents a significant improvement for proteomic analyses of the Golgi from conifers. A total of thirty known Golgi proteins were identified by mass spectrometry including glycosyltransferases from gene families involved in glucomannan and glucuronoxylan biosynthesis. The free flow electrophoresis fractions of enriched Golgi were highly abundant in structural proteins (actin and tubulin) indicating a role for the cytoskeleton during compression wood formation. The mass spectrometry proteomics data associated with this study have been deposited to the ProteomeXchange with identifier PXD000557.

Draft Genome Sequence of Novosphingobium nitrogenifigens Y88T

Novosphingobium nitrogenifigens was originally isolated from pulp and paper mill wastewater, a low-nitrogen, high-carbon environment. N. nitrogenifigens is the first known nitrogen-fixing, polyhydroxyalkanoate-accumulating sphingomonad, and we report the annotated draft genome sequence of the type strain Y88(T) here.

CLE genes in plant development: Gain-of-function analyses, pleiotropy, hypermorphy and neomorphy.

In Arabidopsis, the CLE genes encode a family of at least 32 peptide ligands. Our gain-of-function studies demonstrated that all of the 18 genes we examined caused pleiotropic and often opposing phenotypes, including various combinations of increased root and rosette growth, root stunting, dwarfing, shoot apical meristem (SAM) arrest, asymmetric leaf development, and “shrub-like” phenotypes. Many CLE genes caused similar phenotypes that correlated with common amino acid substitutions among subsets of the genes, suggesting key amino acids necessary for certain phenotypes. The pleiotropic phenotypes we observed were the results of integrated hypermorphic and global neomorphic responses to abundant ectopic ligands through multiple signaling pathways. The phenotypes are also suggestive of wide ranging, often antagonistic roles played by these genes in plant development. The interpretations of our findings and some apparently contradictory recent results are discussed in this context.

A survey of the natural variation in biomechanical and cell wall properties in inflorescence stems reveals new insights into the utility of Arabidopsis as a wood model

The natural trait variation in Arabidopsis thaliana (L.) Heynh. accessions is an important resource for understanding many biological processes but it is underexploited for wood-related properties. Twelve A. thaliana accessions from diverse geographical locations were examined for variation in secondary growth, biomechanical properties, cell wall glycan content, cellulose microfibril angle (MFA) and flowering time. The effect of daylength was also examined. Secondary growth in rosette and inflorescence stems was observed in all accessions. Organised cellulose microfibrils in inflorescence stems were found in plants grown under long and short days. A substantial range of phenotypic variation was found in biochemical and wood-related biophysical characteristics, particularly for tensile strength, tensile stiffness, MFA and some cell wall components. The four monosaccharides galactose, arabinose, rhamnose and fucose strongly correlated with each other as well as with tensile strength and MFA, consistent with mutations in arabinogalactan protein and fucosyl- and xyloglucan galactosyl-transferase genes that result in decreases in strength. Conversely, these variables showed negative correlations with lignin content. Our data support the notion that large-scale natural variation studies of wood-related biomechanical and biochemical properties of inflorescence stems will be useful for the identification of novel genes important for wood formation and quality, and therefore biomaterial and renewable biofuel production.

Proteomic Phenotyping of Novosphingobium nitrogenifigens Reveals a Robust Capacity for Simultaneous Nitrogen Fixation, Polyhydroxyalkanoate Production, and Resistance to Reactive Oxygen Species

ABSTRACT Novosphingobium nitrogenifigens Y88T (Y88) is a free-living, diazotrophic Alphaproteobacterium, capable of producing 80% of its biomass as the biopolymer polyhydroxybutyrate (PHB). We explored the potential utility of this species as a polyhydroxybutyrate production strain, correlating the effects of glucose, nitrogen availability, dissolved oxygen concentration, and extracellular pH with polyhydroxybutyrate production and changes in the Y88 proteomic profile. Using two-dimensional differential in-gel electrophoresis and tandem mass spectrometry, we identified 217 unique proteins from six growth conditions. We observed reproducible, characteristic proteomic signatures for each of the physiological states we examined. We identified proteins that changed in abundance in correlation with either nitrogen fixation, dissolved oxygen concentration, or acidification of the growth medium. The proteins that correlated with nitrogen fixation were identified either as known nitrogen fixation proteins or as novel proteins that we predict play roles in aspects of nitrogen fixation based on their proteomic profiles. In contrast, the proteins involved in central carbon and polyhydroxybutyrate metabolism were constitutively abundant, consistent with the constitutive polyhydroxybutyrate production that we observed in this species. Three proteins with roles in detoxification of reactive oxygen species were identified in this obligate aerobe. The most abundant protein in all experiments was a polyhydroxyalkanoate granule-associated protein, phasin. The full-length isoform of this protein has a long, intrinsically disordered Ala/Pro/Lys-rich N-terminal segment, a feature that appears to be unique to sphingomonad phasins. The data suggest that Y88 has potential as a PHB production strain due to its aerobic tolerance and metabolic orientation toward polyhydroxybutyrate accumulation, even in low-nitrogen growth medium.