Ashwin K. Rishinaramangalam

Internal quantum efficiency and carrier dynamics in semipolar (20 21 ) InGaN/GaN light-emitting diodes

The internal quantum efficiencies (IQE) and carrier lifetimes of semipolar (202¯1¯) InGaN/GaN LEDs with different active regions are measured using temperature-dependent, carrier-density-dependent, and time-resolved photoluminescence. Three active regions are investigated: one 12-nm-thick single quantum well (SQW), two 6-nm-thick QWs, and three 4-nm-thick QWs. The IQE is highest for the 12-nm-thick SQW and decreases as the well width decreases. The radiative lifetimes are similar for all structures, while the nonradiative lifetimes decrease as the well width decreases. The superior IQE and longer nonradiative lifetime of the SQW structure suggests using thick SQW active regions for high brightness semipolar (202¯1¯) LEDs.

High-Speed Nonpolar InGaN/GaN LEDs for Visible-Light Communication

Free-standing nonpolar GaN substrates provide an excellent platform for the fabrication of high-speed blue and green light-emitting diodes (LEDs), which are attractive for visible-light communication, plastic optical fiber communication, and short-range under water optical communication. Nonpolar LEDs on free-standing GaN exhibit a large electron-hole wave function overlap, low extended defect density, and favorable thermal properties. Here, we demonstrate high-speed nonpolar InGaN/GaN LEDs with a peak emission wavelength between 455 and 465 nm on free-standing nonpolar GaN substrates. A large frequency modulation bandwidth of 524 MHz is demonstrated at a current density of 10 kA/cm 2 .

Differential carrier lifetime and transport effects in electrically injected III-nitride light-emitting diodes

This work describes a small-signal microwave method for determining the differential carrier lifetime and transport effects in electrically injected InGaN/GaN light-emitting diodes (LEDs). By considering the carrier diffusion, capture, thermionic escape, and recombination, the rate equations are used to derive an equivalent small-signal electrical circuit for the LEDs, from which expressions for the input impedance and modulation response are obtained. The expressions are simultaneously fit to the experimental data for the input impedance and modulation response for nonpolar InGaN/GaN micro-LEDs on free-standing GaN substrates. The fittings are used to extract the transport related circuit parameters and differential carrier lifetimes. The dependence of the parameters on the device diameter and current density is reported. We also derive approximations for the modulation response under low and high injection levels and show that the transport of carriers affects the modulation response of the device, espe...

Tailoring the morphology and luminescence of GaN/InGaN core–shell nanowires using bottom-up selective-area epitaxy

Controlled bottom-up selective-area epitaxy (SAE) is used to tailor the morphology and photoluminescence properties of GaN/InGaN core-shell nanowire arrays. The nanowires are grown on c-plane sapphire substrates using pulsed-mode metal organic chemical vapor deposition. By varying the dielectric mask configuration and growth conditions, we achieve GaN nanowire cores with diameters ranging from 80 to 700 nm that exhibit various degrees of polar, semipolar, and nonpolar faceting. A single InGaN quantum well (QW) and GaN barrier shell is also grown on the GaN nanowire cores and micro-photoluminescence is obtained and analyzed for a variety of nanowire dimensions, array pitch spacings, and aperture diameters. By increasing the nanowire pitch spacing on the same growth wafer, the emission wavelength redshifts from 440 to 520 nm, while increasing the aperture diameter results in a ∼35 nm blueshift. The thickness of one QW/barrier period as a function of pitch and aperture diameter is inferred using scanning electron microscopy, with larger pitches showing significantly thicker QWs. Significant increases in indium composition were predicted for larger pitches and smaller aperture diameters. The results are interpreted in terms of local growth conditions and adatom capture radius around the nanowires. This work provides significant insight into the effects of mask configuration and growth conditions on the nanowire properties and is applicable to the engineering of monolithic multi-color nanowire LEDs on a single chip.

Controlled Growth of Ordered III-Nitride Core–Shell Nanostructure Arrays for Visible Optoelectronic Devices

We demonstrate the growth of ordered arrays of nonpolar

Three-dimensional GaN templates for molecular beam epitaxy of nonpolar InGaN/GaN coaxial light-emitting diodes

\{ 10\bar{1}0\}

Nanoporous distributed Bragg reflectors on free-standing nonpolar m-plane GaN

{101¯0} core–shell nanowalls and semipolar