Atsuko Matsuoka

Analysis of phthalic acid diesters, monoester, and other plasticizers in polyvinyl chloride household products in Japan.

The aim of this study was to determine the concentrations of six phthalic acid diesters (PAEs) [di(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), diisononyl phthalate (DINP), di-n-octyl phthalate (DNOP), and diisodecyl phthalate (DIDP)], two non-phthalic plasticizers [di(2-ethylhexyl) adipate (DEHA), 2,2,4-trimethyl-1,3-pentanediol diisobutylate (TMPDIB)], and mono 2-ethylhexyl phthalate(MEHP) in polyvinyl chloride (PVC) household products that children often places in their mouths and/or contact with their skin (41 products, 47 samples) in Japan. The detection frequencies of the studied compounds were as follows: DEHP (79 %), DINP-2 (13 %), DINP-1 (11 %), DBP (8.5 %), DEHA (8.5 %), DIDP (4.3 %), and DNOP (2.1 %). Concentrations of these compounds ranged from 0.021 % to 48 %. BBP and TMPDIB were not detected in the all samples. Most samples contained DEHP and DINP at high concentrations over 0.1 %. High concentrations of PAEs were detected in PVC household products that appear appealing to children and can possibly be licked and chewed by them. Di(2-ethylhexyl) terephtalete, diisononyl 1,2-cyclohexanedicarboxylic acid, acetyl tributyl citrate, and di(2-ethylhexyl) 4-cyclohexene-1,2-dicarboxylate used as substitute plasticizers were also detected in several samples. MEHP was present in 70 % of the samples, with concentrations ranging from trace amounts to 140 μg/g. The ratios of MEHP against DEHP were 6.2 × 10−4 to 1.6 × 10−1 %. MEHP in the household products investigated in this study was most probably an impurity in DEHP. The high concentrations of PAEs detected in products that children often place in their mouth reveal the importance of replacing plasticizers in common household products, and not just childrens toys, with safer alternatives.

Calcium‐incorporated titanium surfaces influence the osteogenic differentiation of human mesenchymal stem cells

In this study, a titanium surface was chemically modified with calcium ions and assessed for its influence on osteogenic differentiation and molecular responses of human mesenchymal stem cells (hMSCs). Titanium disks were treated with NaOH (NaOH treatment), NaOH + CaCl2 (CaCl2 treatment), or NaOH + Ca(OH)2 (Ca(OH)2 treatment). Ca(OH)2 treatment caused significantly greater calcium incorporation onto the titanium surface and apatite formation than CaCl2 treatment. The morphology of hMSCs differed on CaCl2- and Ca(OH)2-treated disks. The osteopontin (OPN) expression in hMSCs cultured on CaCl2-treated titanium was significantly higher than that in cells cultured on NaOH-treated disks; OPN expression was significantly higher in cells cultured on Ca(OH)2-treated disks than on un-, NaOH-, and CaCl2-treated disks. Osteocalcin (OCN) protein expression in hMSCs cultured on Ca(OH)2-treated disks was significantly higher than that on all the other disks. Comparative expression profiling by DNA microarray and pathway analyses revealed that calcium modification of the titanium surface induced integrin β3 after OPN upregulation and promoted Wnt/β-catenin signaling in hMSCs. In addition, Ca(OH)2 treatment upregulated the expression of bone morphogenetic protein 2, cyclooxygenase 2, and parathyroid hormone-like hormone in comparison to CaCl2 treatment. These observations suggest that calcium-modified titanium surfaces affect osteogenic differentiation in hMSCs and that Ca(OH)2 treatment induced osteogenic differentiation in hMSCs, whereas CaCl2 treatment had a limited effect.

Analysis of primary aromatic amines originated from azo dyes in commercial textile products in Japan

The purpose of this study was to clarify the actual condition of 26 types of carcinogenic primary aromatic amines (PAAs) originated from azo dyes in commercial textile products in Japan. In the case of textiles made of various fibers of various colors, the fibers were separated by color and analyzed. A total of 86 textile products (117 samples) were analyzed. Twenty-one kinds of PAAs were detected in the samples and almost all the PAAs were detected at low concentrations. However, the concentrations of benzidine, 3,3′-dimethoxybenzidine, and 2,4-diaminotoluene (56–440 μg g−1) in placemats made of cotton were found to exceed EU regulation limits of 30 μg g−1. Although such placemats do not always come into contact with the users skin, it is thought that they should be handled more carefully. Finally, 7 products (8 samples) contained PAAs at concentrations that exceeded the regulation limits. Two sample preparation methods (with and without solvent extraction) were performed on the same sample in order to compare the PAAs in samples in which it is difficult to separate the component materials, such as a cotton fabric that contained polyester fibers. In a comparison of the results obtained from the two methods, it was observed that the concentrations and/or kinds of PAAs detected in the samples were different. It was therefore thought that textile products that present this particular challenge should be analyzed by both methods.

Screening study on hemolysis suppression effect of an alternative plasticizer for the development of a novel blood container made of polyvinyl chloride

The aim of this study is to identify a plasticizer that is effective in the suppression of the autohemolysis of the stored blood and can be used to replace di(2-ethylhexyl) phthalate (DEHP) in blood containers. The results of hemolysis test using mannitol-adenine-phosphate/red cell concentrates (MAP/RCC) spiked with plasticizers included phthalate, phthalate-like, trimeliate, citrate, and adipate derivatives revealed that di-isononyl-cyclohexane-1,2-dicarboxylate (Hexamoll(®) DINCH), di(2-ethylhexyl)-1,2,3,6-tetrahydro-phthalate (DOTP), and diisodecyl phthalate (DIDP) exhibited a hemolysis suppression effect almost equal to that of DEHP, but not other plasticizers. This finding suggested that the presence of 2 carboxy-ester groups at the ortho position on a 6-membered ring of carbon atoms may be required to exhibit such an effect. The hemolytic ratios of MAP/RCC-soaked polyvinyl chloride (PVC) sheets containing DEHP or different amounts of DINCH or DOTP were reduced to 10.9%, 9.2-12.4%, and 5.2-7.8%, respectively (MAP/RCC alone, 28.2%) after 10 weeks of incubation. The amount of plasticizer eluted from the PVC sheet was 53.1, 26.1-36.5, and 78.4-150 µg/mL for DEHP, DINCH, and DOTP, respectively. PVC sheets spiked with DIDP did not suppress the hemolysis induced by MAP/RCC because of low leachability (4.8-6.0 µg/mL). These results suggested that a specific structure of the plasticizer and the concentrations of least more than ∼10 µg/mL were required to suppress hemolysis due to MAP/RCC.

Development and performance evaluation of a positive reference material for hemolysis testing

This study deals with the development and performance evaluation of a positive reference material for hemolysis testing, which is used for evaluating the biological safety of medical devices. Genapol X-080, a nonionic detergent, was selected as a candidate hemolytic substance in a survey of 23 chemical compounds; it showed significant hemolytic activity against rabbit defibrinated blood at concentrations more than 20 µg/mL. A polyvinyl chloride (PVC) sheet spiked with 0.6% (w/w) of the compound exhibited weak hemolytic activity in direct contact and/or extract-based assays after 4 h incubation at 37°C. A PVC sheet containing 5.8% (w/w) Genapol X-080 induced complete hemolysis in both assays. The amount of Genapol X-080 eluted from each PVC sheet during hemolysis testing using the direct contact method increased time-dependently and reached 25.6 (former sheet) or 1154 (later sheet) µg/mL after 4 h incubation, which was similar to or much higher than the critical micelle concentration, respectively. Similar elution behavior was observed using the extract-based method, and the Genapol X-080 content in test solutions prepared by autoclave extraction of both sheets was 22.5 and 358 µg/mL, respectively, indicating a clear relationship between the degree of hemolytic activity and the eluted amount of Genapol X-080. Thus, a PVC sheet spiked with a compound exhibiting different hemolytic activity depending on its concentration may be useful as a positive reference material to validate the hemolysis tests.

A development and biological safety evaluation of novel PVC medical devices with surface structures modified by UV irradiation to suppress plasticizer migration

This study examines the chemical, physicochemical, and biological properties of PVC sheets treated with UV irradiation on their surfaces to suppress the elution of a plasticizer, di-(2-ethylhexyl) phthalate (DEHP), for developing novel polyvinyl chloride (PVC) medical devices. The PVC sheets irradiated under conditions 1 (52.5 μW/cm(2), 136 J/cm(2)) and 2 (0.45 mW/cm(2), 972 J/cm(2)) exhibited considerable toxicity in cytotoxicity tests and chromosome aberration tests due to the generation of DEHP oxidants, but no toxicity was detected in the PVC sheet irradiated under condition 3 (8.3 mW/cm(2), 134 J/cm(2)). The release of DEHP from the surface irradiated under condition 3 was significantly suppressed, and mono-(2-ethylhexyl) phthalate (MEHP) converted from a portion of DEHP could be easily removed from the surface by washing with methanol. The physicochemical properties of the surface regarding the suppression of DEHP elution remained stable through all sterilizations tested, but MEHP elution was partially recrudesced by the sterilizations except for gamma irradiation. These results indicated that UV irradiation using a strong UV-source over a short time (condition 3) followed by methanol washing and gamma sterilization may be useful for preparing novel PVC products that did not elute plasticizers and do not exhibit toxicity originating from UV irradiation.

Development of an in vitro screening method for safety evaluation of nanomaterials

To evaluate the role of particle size in cytotoxicity tests of nanomaterials (NMs), we exposed Chinese hamster cells to polystyrene (PS) spheres with defined diameters ranging from 0.1 to 9.2 microm. We found that the 4.45-microm PS particles were most cytotoxic while sizes 0.1 and 0.2 microm showed no cytotoxicity up to 1000 microg/ml. In the chromosome aberration test, the 4.45-microm PS particles induced polyploidy in a mass concentration-dependent manner in 24- and 48-h treatments. The 5.26-microm PS particles induced polyploidy only at 1000 microg/ml for 48 h. Next, we performed the cytotoxicity test with as-grown single walled carbon nanohorns (NHas). These were suspended in DMSO and then transferred into the culture medium followed by sonication. Six suspensions differently sonicated showed the same apparent toxicity, although the total particle size distributions differed. However, the sizes of NHas particles predicted to be most toxic from the experiments with PS particles, i.e. 1.01-4.47 microm constituted 40-60% of all particles in all six suspensions. The results suggest that the cytotoxicity of NMs in suspension depends on specific sizes of aggregates and therefore suspensions should be checked with regard to particle size distributions in assays of toxic effects. The uptake of particles into cells was confirmed by confocal microscopy.

Evaluation of the Immuno-Protective Effects of the New-Type of Bags Using ELISA- and FACS-Analysis

This study investigated the usefulness of modified polyurethane (MPU) coating micropore membrane bags for diminishing the immunological responses following organ or tissue transplantation in allogeneic setting. Spleen from Brown Norway (BN) rats (donor) were placed into the peritoneal cavity of Lewis rat (recipient) either directly or inside of MPU coated bags. Lewis rat with Sham’s operation served as control. After 12 and 24 weeks, cytokines of IL -4, IL -13, TNF -α and IFN -γ, and flow cytometric evaluations for CD4+ and CD8+ cells of the recipient blood were carried out. TNF -α levels proved polyurethane coating effective in reducing inflammatory reaction at 12 weeks. Twelve week IFN -γ and, CD4+ and CD8 cells indicated that graft-versus-host-reaction (GVHR) took place but polyurethane coated bag did not prevent or reduced this reaction. Thus, this study shows that MPU coating might be functional in preventing inflammatory reaction but is not useful for preventing GVHR.