Austin G. Meyer

Systematic humanization of yeast genes reveals conserved functions and genetic modularity

Staying the same across a billion years How far across evolution do families of genes retain their function? Yeast and humans are separated by roughly a billion years of evolutionary history, and yet genes from one can substitute for orthologous genes in the other. To study this effect systematically, Kachroo et al. replaced over 400 essential yeast genes with their human orthologs. Roughly half of the human genes could functionally replace their yeast counterparts. Genes being in the same pathway was as important as sequence or expression similarity in determining replaceability. Science, this issue p. 921 Genes in the same pathway can retain their function in organisms separated by a billion years of evolutionary history. To determine whether genes retain ancestral functions over a billion years of evolution and to identify principles of deep evolutionary divergence, we replaced 414 essential yeast genes with their human orthologs, assaying for complementation of lethal growth defects upon loss of the yeast genes. Nearly half (47%) of the yeast genes could be successfully humanized. Sequence similarity and expression only partly predicted replaceability. Instead, replaceability depended strongly on gene modules: Genes in the same process tended to be similarly replaceable (e.g., sterol biosynthesis) or not (e.g., DNA replication initiation). Simulations confirmed that selection for specific function can maintain replaceability despite extensive sequence divergence. Critical ancestral functions of many essential genes are thus retained in a pathway-specific manner, resilient to drift in sequences, splicing, and protein interfaces.

Maximum Allowed Solvent Accessibilites of Residues in Proteins

The relative solvent accessibility (RSA) of a residue in a protein measures the extent of burial or exposure of that residue in the 3D structure. RSA is frequently used to describe a proteins biophysical or evolutionary properties. To calculate RSA, a residues solvent accessibility (ASA) needs to be normalized by a suitable reference value for the given amino acid; several normalization scales have previously been proposed. However, these scales do not provide tight upper bounds on ASA values frequently observed in empirical crystal structures. Instead, they underestimate the largest allowed ASA values, by up to 20%. As a result, many empirical crystal structures contain residues that seem to have RSA values in excess of one. Here, we derive a new normalization scale that does provide a tight upper bound on observed ASA values. We pursue two complementary strategies, one based on extensive analysis of empirical structures and one based on systematic enumeration of biophysically allowed tripeptides. Both approaches yield congruent results that consistently exceed published values. We conclude that previously published ASA normalization values were too small, primarily because the conformations that maximize ASA had not been correctly identified. As an application of our results, we show that empirically derived hydrophobicity scales are sensitive to accurate RSA calculation, and we derive new hydrophobicity scales that show increased correlation with experimentally measured scales.

Identifying structural variation in haploid microbial genomes from short-read resequencing data using breseq

BackgroundMutations that alter chromosomal structure play critical roles in evolution and disease, including in the origin of new lifestyles and pathogenic traits in microbes. Large-scale rearrangements in genomes are often mediated by recombination events involving new or existing copies of mobile genetic elements, recently duplicated genes, or other repetitive sequences. Most current software programs for predicting structural variation from short-read DNA resequencing data are intended primarily for use on human genomes. They typically disregard information in reads mapping to repeat sequences, and significant post-processing and manual examination of their output is often required to rule out false-positive predictions and precisely describe mutational events.ResultsWe have implemented an algorithm for identifying structural variation from DNA resequencing data as part of the breseq computational pipeline for predicting mutations in haploid microbial genomes. Our method evaluates the support for new sequence junctions present in a clonal sample from split-read alignments to a reference genome, including matches to repeat sequences. Then, it uses a statistical model of read coverage evenness to accept or reject these predictions. Finally, breseq combines predictions of new junctions and deleted chromosomal regions to output biologically relevant descriptions of mutations and their effects on genes. We demonstrate the performance of breseq on simulated Escherichia coli genomes with deletions generating unique breakpoint sequences, new insertions of mobile genetic elements, and deletions mediated by mobile elements. Then, we reanalyze data from an E. coli K-12 mutation accumulation evolution experiment in which structural variation was not previously identified. Transposon insertions and large-scale chromosomal changes detected by breseq account for ~25% of spontaneous mutations in this strain. In all cases, we find that breseq is able to reliably predict structural variation with modest read-depth coverage of the reference genome (>40-fold).ConclusionsUsing breseq to predict structural variation should be useful for studies of microbial epidemiology, experimental evolution, synthetic biology, and genetics when a reference genome for a closely related strain is available. In these cases, breseq can discover mutations that may be responsible for important or unintended changes in genomes that might otherwise go undetected.

Integrating Sequence Variation and Protein Structure to Identify Sites under Selection

We present a novel method to identify sites under selection in protein-coding genes. Our method combines the traditional Goldman-Yang model of coding-sequence evolution with the information obtained from the 3D structure of the evolving protein, specifically the relative solvent accessibility (RSA) of individual residues. We develop a random-effects likelihood sites model in which rate classes are RSA dependent. The RSA dependence is modeled with linear functions. We demonstrate that our RSA-dependent model provides a significantly better fit to molecular sequence data than does a traditional, RSA-independent model. We further show that our model provides a natural, RSA-dependent neutral baseline for the evolutionary rate ratio ω = dN/dS Sites that deviate from this neutral baseline likely experience selection pressure for function. We apply our method to the influenza proteins hemagglutinin and neuraminidase. For hemagglutinin, our method recovers positively selected sites near the sialic acid-binding site and negatively selected sites that may be important for trimerization. For neuraminidase, our method recovers the oseltamivir resistance site and otherwise suggests that few sites deviate from the neutral baseline. Our method is broadly applicable to any protein sequences for which structural data are available or can be obtained via homology modeling or threading.

Modeling Coding-Sequence Evolution within the Context of Residue Solvent Accessibility

BackgroundProtein structure mediates site-specific patterns of sequence divergence. In particular, residues in the core of a protein (solvent-inaccessible residues) tend to be more evolutionarily conserved than residues on the surface (solvent-accessible residues).ResultsHere, we present a model of sequence evolution that explicitly accounts for the relative solvent accessibility of each residue in a protein. Our model is a variant of the Goldman-Yang 1994 (GY94) model in which all model parameters can be functions of the relative solvent accessibility (RSA) of a residue. We apply this model to a data set comprised of nearly 600 yeast genes, and find that an evolutionary-rate ratio ω that varies linearly with RSA provides a better model fit than an RSA-independent ω or an ω that is estimated separately in individual RSA bins. We further show that the branch length t and the transition-transverion ratio κ also vary with RSA. The RSA-dependent GY94 model performs better than an RSA-dependent Muse-Gaut 1994 (MG94) model in which the synonymous and non-synonymous rates individually are linear functions of RSA. Finally, protein core size affects the slope of the linear relationship between ω and RSA, and gene expression level affects both the intercept and the slope.ConclusionsStructure-aware models of sequence evolution provide a significantly better fit than traditional models that neglect structure. The linear relationship between ω and RSA implies that genes are better characterized by their ω slope and intercept than by just their mean ω.

Geometric Constraints Dominate the Antigenic Evolution of Influenza H3N2 Hemagglutinin.

We have carried out a comprehensive analysis of the determinants of human influenza A H3 hemagglutinin evolution. We consider three distinct predictors of evolutionary variation at individual sites: solvent accessibility (as a proxy for protein fold stability and/or conservation), Immune Epitope Database (IEDB) epitope sites (as a proxy for host immune bias), and proximity to the receptor-binding region (as a proxy for one of the functions of hemagglutinin-to bind sialic acid). Individually, these quantities explain approximately 15% of the variation in site-wise dN/dS. In combination, solvent accessibility and proximity explain 32% of the variation in dN/dS; incorporating IEDB epitope sites into the model adds only an additional 2 percentage points. Thus, while solvent accessibility and proximity perform largely as independent predictors of evolutionary variation, they each overlap with the epitope-sites predictor. Furthermore, we find that the historical H3 epitope sites, which date back to the 1980s and 1990s, only partially overlap with the experimental sites from the IEDB, and display similar overlap in predictive power when combined with solvent accessibility and proximity. We also find that sites with dN/dS > 1, i.e., the sites most likely driving seasonal immune escape, are not correctly predicted by either historical or IEDB epitope sites, but only by proximity to the receptor-binding region. In summary, a simple geometric model of HA evolution outperforms a model based on epitope sites. These results suggest that either the available epitope sites do not accurately represent the true influenza antigenic sites or that host immune bias may be less important for influenza evolution than commonly thought.

Predicting Evolutionary Site Variability from Structure in Viral Proteins: Buriedness, Packing, Flexibility, and Design

Several recent works have shown that protein structure can predict site-specific evolutionary sequence variation. In particular, sites that are buried and/or have many contacts with other sites in a structure have been shown to evolve more slowly, on average, than surface sites with few contacts. Here, we present a comprehensive study of the extent to which numerous structural properties can predict sequence variation. The quantities we considered include buriedness (as measured by relative solvent accessibility), packing density (as measured by contact number), structural flexibility (as measured by B factors, root-mean-square fluctuations, and variation in dihedral angles), and variability in designed structures. We obtained structural flexibility measures both from molecular dynamics simulations performed on nine non-homologous viral protein structures and from variation in homologous variants of those proteins, where they were available. We obtained measures of variability in designed structures from flexible-backbone design in the Rosetta software. We found that most of the structural properties correlate with site variation in the majority of structures, though the correlations are generally weak (correlation coefficients of 0.1–0.4). Moreover, we found that buriedness and packing density were better predictors of evolutionary variation than structural flexibility. Finally, variability in designed structures was a weaker predictor of evolutionary variability than buriedness or packing density, but it was comparable in its predictive power to the best structural flexibility measures. We conclude that simple measures of buriedness and packing density are better predictors of evolutionary variation than the more complicated predictors obtained from dynamic simulations, ensembles of homologous structures, or computational protein design.

Functional Sites Induce Long-Range Evolutionary Constraints in Enzymes

Functional residues in proteins tend to be highly conserved over evolutionary time. However, to what extent functional sites impose evolutionary constraints on nearby or even more distant residues is not known. Here, we report pervasive conservation gradients toward catalytic residues in a dataset of 524 distinct enzymes: evolutionary conservation decreases approximately linearly with increasing distance to the nearest catalytic residue in the protein structure. This trend encompasses, on average, 80% of the residues in any enzyme, and it is independent of known structural constraints on protein evolution such as residue packing or solvent accessibility. Further, the trend exists in both monomeric and multimeric enzymes and irrespective of enzyme size and/or location of the active site in the enzyme structure. By contrast, sites in protein–protein interfaces, unlike catalytic residues, are only weakly conserved and induce only minor rate gradients. In aggregate, these observations show that functional sites, and in particular catalytic residues, induce long-range evolutionary constraints in enzymes.

PeptideBuilder: A simple Python library to generate model peptides

We present a simple Python library to construct models of polypeptides from scratch. The intended use case is the generation of peptide models with pre-specified backbone angles. For example, using our library, one can generate a model of a set of amino acids in a specific conformation using just a few lines of python code. We do not provide any tools for energy minimization or rotamer packing, since powerful tools are available for these purposes. Instead, we provide a simple Python interface that enables one to add residues to a peptide chain in any desired conformation. Bond angles and bond lengths can be manipulated if so desired, and reasonable values are used by default.

Cross-species comparison of site-specific evolutionary-rate variation in influenza haemagglutinin.

We investigate the causes of site-specific evolutionary-rate variation in influenza haemagglutinin (HA) between human and avian influenza, for subtypes H1, H3, and H5. By calculating the evolutionary-rate ratio, ω = dN/dS as a function of a residues solvent accessibility in the three-dimensional protein structure, we show that solvent accessibility has a significant but relatively modest effect on site-specific rate variation. By comparing rates within HA subtypes among host species, we derive an upper limit to the amount of variation that can be explained by structural constraints of any kind. Protein structure explains only 20–40% of the variation in ω. Finally, by comparing ω at sites near the sialic-acid-binding region to ω at other sites, we show that ω near the sialic-acid-binding region is significantly elevated in both human and avian influenza, with the exception of avian H5. We conclude that protein structure, HA subtype, and host biology all impose distinct selection pressures on sites in influenza HA.