Avijit Pramanik

Aptamer-conjugated graphene oxide membranes for highly efficient capture and accurate identification of multiple types of circulating tumor cells.

Tumor metastasis is responsible for 1 in 4 deaths in the United States. Though it has been well-documented over past two decades that circulating tumor cells (CTCs) in blood can be used as a biomarker for metastatic cancer, there are enormous challenges in capturing and identifying CTCs with sufficient sensitivity and specificity. Because of the heterogeneous expression of CTC markers, it is now well understood that a single CTC marker is insufficient to capture all CTCs from the blood. Driven by the clear need, this study reports for the first time highly efficient capture and accurate identification of multiple types of CTCs from infected blood using aptamer-modified porous graphene oxide membranes. The results demonstrate that dye-modified S6, A9, and YJ-1 aptamers attached to 20–40 μm porous garphene oxide membranes are capable of capturing multiple types of tumor cells (SKBR3 breast cancer cells, LNCaP prostate cancer cells, and SW-948 colon cancer cells) selectively and simultaneously from infected blood. Our result shows that the capture efficiency of graphene oxide membranes is ∼95% for multiple types of tumor cells; for each tumor concentration, 10 cells are present per milliliter of blood sample. The selectivity of our assay for capturing targeted tumor cells has been demonstrated using membranes without an antibody. Blood infected with different cells also has been used to demonstrate the targeted tumor cell capturing ability of aptamer-conjugated membranes. Our data also demonstrate that accurate analysis of multiple types of captured CTCs can be performed using multicolor fluorescence imaging. Aptamer-conjugated membranes reported here have good potential for the early diagnosis of diseases that are currently being detected by means of cell capture technologies.

Spectroscopic, Structural, and Theoretical Studies of Halide Complexes with a Urea-Based Tripodal Receptor

A urea-based tripodal receptor L substituted with p-cyanophenyl groups has been studied for halide anions using (1)H NMR spectroscopy, density functional theory (DFT) calculations, and X-ray crystallography. The (1)H NMR titration studies suggest that the receptor forms a 1:1 complex with an anion, showing a binding trend in the order of fluoride > chloride > bromide > iodide. The interaction of a fluoride anion with the receptor was further confirmed by 2D NOESY and (19)F NMR spectroscopy in DMSO-d(6). DFT calculations indicate that the internal halide anion is held by six NH···X interactions with L, showing the highest binding energy for the fluoride complex. Structural characterization of the chloride, bromide, and silicon hexafluoride complexes of [LH(+)] reveals that the anion is externally located via hydrogen bonding interactions. For the bromide or chloride complex, two anions are bridged with two receptors to form a centrosymmetric dimer, while for the silicon hexafluoride complex, the anion is located within a cage formed by six ligands and two water molecules.

Antimicrobial peptide-conjugated graphene oxide membrane for efficient removal and effective killing of multiple drug resistant bacteria

According to the World Health Organization (WHO), multiple drug-resistant (MDR) bacterial infection is a top threat to human health. Since bacteria evolve to resist antibiotics faster than scientists can develop new classes of drugs, the development of new materials which can be used, not only for separation, but also for effective disinfection of drug resistant pathogens is urgent. Driven by this need, we report for the first time the development of a nisin antimicrobial peptide conjugated, three dimensional (3D) porous graphene oxide membrane for identification, effective separation, and complete disinfection of MDR methicillin-resistant Staphylococcus aureus (MRSA) pathogens from water. Experimental data show that due to the size differences, MRSA is captured by the porous membrane, allowing only water to pass through. SEM, TEM, and fluorescence images confirm that pathogens are captured by the membrane. RT-PCR data with colony counting indicate that almost 100% of MRSA can be removed and destroyed from the water sample using the developed membrane. Comparison of MDR killing data between nisin alone, the graphene oxide membrane and the nisin attached graphene oxide membrane demonstrate that the nisin antimicrobial peptide attached graphene oxide membrane can dramatically enhance the possibility of destroying MRSA via a synergestic effect due to the multimodal mechanism.

A Self-assembled Fluoride-Water Cyclic Cluster of [F(H2O)]44− in a Molecular Box

We present an unprecedented fluoride-water cyclic cluster of [F(H(2)O)](4)(4-) assembled in a cuboid molecular box formed by two large macrocycles. Structural characterization reveals that [F(H(2)O)](4)(4-) is assembled by strong H-bonding interactions [OH···F = 2.684(3)-2.724(3) Å], where a fluoride anion plays the topological role of a water molecule in the classical cyclic water octamer. The interaction of fluoride was further confirmed by (19)F NMR and (1)H NMR spectroscopies, indicating the encapsulation of the anionic species within the cavity in solution. High-level DFT calculations and Bader topological analyses fully support the crystallographic results, demonstrating that the bonding arrangement in the fluoride-water cluster arises from the unique geometry of the host.

Seven-coordinate anion complex with a tren-based urea: Binding discrepancy of hydrogen sulfate in solid and solution states

Structural characterization of a hydrogen sulfate complex with a tren-based urea suggests that the anion is coordinated with six NH···O bonds (d(N···O) = 2.857 (3) to 3.092 (3) Å) and one OH···O bond (d(O···O) = 2.57 (2) Å) from three receptors; however, in solution the anion is bound within the pseudo-cavity of one receptor.

Bio-Conjugated CNT-Bridged 3D Porous Graphene Oxide Membrane for Highly Efficient Disinfection of Pathogenic Bacteria and Removal of Toxic Metals from Water

More than a billion people lack access to safe drinking water that is free from pathogenic bacteria and toxic metals. The World Health Organization estimates several million people, mostly children, die every year due to the lack of good quality water. Driven by this need, we report the development of PGLa antimicrobial peptide and glutathione conjugated carbon nanotube (CNT) bridged three-dimensional (3D) porous graphene oxide membrane, which can be used for highly efficient disinfection of Escherichia coli O157:H7 bacteria and removal of As(III), As(V), and Pb(II) from water. Reported results demonstrate that versatile membrane has the capability to capture and completely disinfect pathogenic pathogenic E. coli O157:H7 bacteria from water. Experimentally observed disinfection data indicate that the PGLa attached membrane can dramatically enhance the possibility of destroying pathogenic E. coli bacteria via synergistic mechanism. Reported results show that glutathione attached CNT-bridged 3D graphene oxide membrane can be used to remove As(III), As(V), and Pb(II) from water sample at 10 ppm level. Our data demonstrated that PGLa and glutathione attached membrane has the capability for high efficient removal of E. coli O157:H7 bacteria, As(III), As(V), and Pb(II) simultaneously from Mississippi River water.

Multifunctional Biocompatible Graphene Oxide Quantum Dots Decorated Magnetic Nanoplatform for Efficient Capture and Two-Photon Imaging of Rare Tumor Cells

Circulating tumor cells (CTCs) are extremely rare cells in blood containing billions of other cells. The selective capture and identification of rare cells with sufficient sensitivity is a real challenge. Driven by this need, this manuscript reports the development of a multifunctional biocompatible graphene oxide quantum dots (GOQDs) coated, high-luminescence magnetic nanoplatform for the selective separation and diagnosis of Glypican-3 (GPC3)-expressed Hep G2 liver cancer tumor CTCs from infected blood. Experimental data show that an anti-GPC3-antibody-attached multifunctional nanoplatform can be used for selective Hep G2 hepatocellular carcinoma tumor cell separation from infected blood containing 10 tumor cells/mL of blood in a 15 mL sample. Reported data indicate that, because of an extremely high two-photon absorption cross section (40530 GM), an anti-GPC3-antibody-attached GOQDs-coated magnetic nanoplatform can be used as a two-photon luminescence platform for selective and very bright imaging of a Hep G2 tumor cell in a biological transparency window using 960 nm light. Experimental results with nontargeted GPC3(−) and SK-BR-3 breast cancer cells show that multifunctional-nanoplatform-based cell separation, followed by two-photon imaging, is highly selective for Hep G2 hepatocellular carcinoma tumor cells.

Extremely High Two-Photon Absorbing Graphene Oxide for Imaging of Tumor Cells in the Second Biological Window

Cancer, a life-threatening disease, has become a global pandemic. Targeted tumor imaging using near-infrared (NIR) light is the key to improve the penetration depth and it is highly promising for clinical tumor diagnostics. Driven by this need, in this Letter we have reported aptamer conjugated graphene oxide-based two-photon imaging of breast tumor cells selectively. Reported data indicate that there is an extremely high two-photon absorption from aptamer conjugated graphene oxide (σ2PA = 46890 GM). Experimental data show that two-photon luminescence signal remains almost unchanged even after 2 h of illuminations. Reported results show that S6 RNA aptamers conjugated graphene oxide-based two-photon fluorescence can be used for selective two-photon imaging of SK-BR-3 breast tumor cell in second biological transparency windows using 1100 nm wavelength. Experimental data demonstrate that it is highly capable of distinguishing targeted breast cancer SK-BR-3 cells from other nontargeted MDA-MB-231 breast cancer cells.

Nanoarchitecture Based SERS for Biomolecular Fingerprinting and Label-Free Disease Markers Diagnosis

Conspectus Surface-enhanced Raman spectroscopy (SERS) fingerprinting is highly promising for identifying disease markers from complex mixtures of clinical sample, which has the capability to take medical diagnoses to the next level. Although vibrational frequency in Raman spectra is unique for each biomolecule, which can be used as fingerprint identification, it has not been considered to be used routinely for biosensing due to the fact that the Raman signal is very weak. Contemporary SERS has been demonstrated to be an excellent analytical tool for practical label-free sensing applications due its ability to enhance Raman signals by factors of up to 108–1014 orders of magnitude. Although SERS was discovered more than 40 years ago, its applications are still rare outside the spectroscopy community and it is mainly due to the fact that how to control, manipulate and amplify light on the “hot spots” near the metal surface is in the infancy stage. In this Account, we describe our contribution to develop nanoachitecture based highly reproducible and ultrasensitive detection capability SERS platform via low-cost synthetic routes. Using one-dimensional (1D) carbon nanotube (CNT), two-dimensional (2D) graphene oxide (GO), and zero-dimensional (0D) plasmonic nanoparticle, 0D to 3D SERS substrates have been designed, which represent highly powerful platform for biological diagnosis. We discuss the major design criteria we have used to develop robust SERS substrate to possess high density “hot spots” with very good reproducibility. SERS enhancement factor for 3D SERS substrate is about 5 orders of magnitude higher than only plasmonic nanoparticle and more than 9 orders of magnitude higher than 2D GO. Theoretical finite-difference time-domain (FDTD) stimulation data show that the electric field enhancement |E|2 can be more than 2 orders of magnitude in “hot spots”, which suggests that SERS enhancement factors can be greater than 104 due to the formation of high density “hot spots” in 3D substrate. Next, we discuss the utilization of nanoachitecture based SERS substrate for ultrasensitive and selective diagnosis of infectious disease organisms such as drug resistance bacteria and mosquito-borne flavi-viruses that cause significant health problems worldwide. SERS based “whole-organism fingerprints” has been used to identify infectious disease organisms even when they are so closely related that they are difficult to distinguish. The detection capability can be as low as 10 CFU/mL for methicillin-resistant Staphylococcus aureus (MRSA) and 10 PFU/mL for Dengue virus (DENV) and West Nile virus (WNV). After that, we introduce exciting research findings by our group on the applications of nanoachitecture based SERS substrate for the capture and fingerprint detection of rotavirus from water and Alzheimer’s disease biomarkers from whole blood sample. The SERS detection limit for β-amyloid (Aβ proteins) and tau protein using 3D SERS platform is several orders of magnitude higher than the currently used technology in clinics. Finally, we highlight the promises, major challenges and prospect of nanoachitecture based SERS in biomedical diagnosis field.

Engineering fused coumarin dyes: a molecular level understanding of aggregation quenching and tuning electroluminescence via alkyl chain substitution

Simple molecular structures capable of emitting over the entire visible range are still a challenge. Planar molecular structures have the drawback of fluorescence quenching in the solid state thus limiting their application fields. Combining long range excimer/exciplex emissions with a compound emission have been used to get white light. In this work, a series of new coumarin derivatives having a planar structure have been synthesized and characterized. The effects of systematic variation in alkyl chain functionalization providing morphological variations that permit interesting solid state emitting properties have been discussed simultaneously with electrochemical behavior and OLED (organic light emitting diode) device applications. Carbon chains containing 0–16 carbon atoms have been studied in order to conclude the results that systematic changes in alkyl group substitution can be utilized as a tool to tune the emitting color of these planar coumarins. Alkyl chains were introduced by O-acylation and O-benzoylation reaction on the hydroxyl group of parent coumarin 5. Thus the present strategy is also helpful in establishing a template to control the unproductive interchromophore electronic couplings. Solid state fluorescence properties support the crystal studies. Theoretical studies are also in agreement with experimental data. Electroluminescence of Device 2 with a turn on voltage (Von) around 5–6 V having s-CBP doped with 1% of 8 having alkyl substitution of 2-carbons is found to exhibit white emission with CIE co-ordinates of (0.29, 0.34) which is close to white emission while the alkyl substitution of 14-carbons (compound 17) in Device 7 (Von = 7 V) exhibited green emission. Thus a strategy helpful to tune the electroluminescence has been discussed.