Azni Idris

Production and characterization of a bioflocculant produced by Aspergillus flavus.

The production and characterization of a bioflocculant, IH-7, by Aspergillus flavus was investigated. About 0.4 g of purified bioflocculant with an average molecular weight of 2.574 × 10(4)Da could be obtained from 1L of fermentation medium. The bioflocculant mainly consisted of protein (28.5%) and sugar (69.7%), including 40% of neutral sugar, 2.48% of uronic acid and 1.8% amino sugar. The neutral sugar components are sucrose, lactose, glucose, xylose, galactose, mannose and fructose at a molar ratio of 2.4:4.4:4.1:5.8:9.9:0.8:3.1. Fourier-transform infrared spectroscopy analysis revealed that purified IH-7 contained hydroxyl, amide, carboxyl and methoxyl groups. The elemental analysis of purified IH-7 showed that the weight fractions of the elements C, H, O, N and S were 29.9%, 4.8%, 34.7%, 3.3%, and 2.0%, respectively. IH-7 had good flocculating rate in kaolin suspension without cation addition and stable over wide range of pH and temperature.

An application of the theory of planned behaviour to study the influencing factors of participation in source separation of food waste.

Tremendous increases in biodegradable (food waste) generation significantly impact the local authorities, who are responsible to manage, treat and dispose of this waste. The process of separation of food waste at its generation source is identified as effective means in reducing the amount food waste sent to landfill and can be reused as feedstock to downstream treatment processes namely composting or anaerobic digestion. However, these efforts will only succeed with positive attitudes and highly participations rate by the public towards the scheme. Thus, the social survey (using questionnaires) to analyse publics view and influencing factors towards participation in source separation of food waste in households based on the theory of planned behaviour technique (TPB) was performed in June and July 2011 among selected staff in Universiti Putra Malaysia, Serdang, Selangor. The survey demonstrates that the public has positive intention in participating provided the opportunities, facilities and knowledge on waste separation at source are adequately prepared by the respective local authorities. Furthermore, good moral values and situational factors such as storage convenience and collection times are also encouraged publics involvement and consequently, the participations rate. The findings from this study may provide useful indicator to the waste management authorities in Malaysia in identifying mechanisms for future development and implementation of food waste source separation activities in household programmes and communication campaign which advocate the use of these programmes.

Incorporation of Sewage Sludge in Clay Brick and its Characterization

This study reports the use of sewage sludge generated from sewage treatment plant (STP) as raw material in a clay brick-making process. The physico-chemical and mineralogical characterization of the sewage sludge and clay were carried out in order to identify the major technological constraints and to define the sludge pretreatment requirements if necessary. Moreover, the effects on processing conditions and/or on changes of typical final characteristics are also evaluated. Bricks were produced with sewage sludge additions ranging from 10 to 40% by dry weight. The texture and finishing of the surface of sludge-amended clay bricks were rather poor. As for the physical and chemical properties, bricks with a sludge content of up to 40 wt.% were capable of meeting the relevant technical standards. However, bricks with more than 30 wt.% sludge addition are not recommended for use since they are brittle and easily broken even when handled gently. A tendency for a general degradation of brick properties with sludge additions was observed due to its refractory nature. Therefore, sludge bricks of this nature are only suitable for use as common bricks, which are normally not exposed to view, because of poor surface finishing.

Total removal of heavy metal from mixed plating rinse wastewater

A mixed plating rinse wastewater containing zinc, hexavalent chromium, trivalent chromium, and cyanide with total dissolved solids of 424 mg/1 was treated by a model consisting of a sand filter and ion exchange columns. A strongly acidic cation resin in hydrogen form and a strongly basic anion resin in hydroxide form were used in the columns as cationic and anionic exchangers, respectively. The cationic and anionic exchangers were regenerated by using 2% H2SO4 and 5% NaOH, respectively. A 100% removal of zinc, total chromium, hexavalent chromium and trivalent chromium was achieved in the studies. Very high removal of total dissolved solids, cyanide and hardness level was achieved at 98.9%, 99.9% and 96.5%, respectively. The conductivity of wastewater was reduced from an average of 358 μs/cm to 5 μs/cm. The case study has shown that treatment systems using cationic and anionic resin were able to treat a mixed plating bath effluent to comply with the standard discharge under the Malaysian Environmental Quality (Sewage and Industrial Effluents) Regulation, 1979.

Filamentous fungi in Indah Water Konsortium (IWK) sewage treatment plant for biological treatment of domestic wastewater sludge

ABSTRACT A study was carried out to isolate and identify filamentous fungi for the treatment of domestic wastewater sludge by enhancing biodegradability, settleability and dewaterability of treated sludge using liquid state bioconversion process. A total of 70 strains of filamentous fungi were isolated from three different sources (wastewater, sewage sludge and leachate) of IWKs (Indah Water Konsortium) sewage treatment plant, Malaysia. The isolated strains were purified by conventional techniques and identified by microscopic examination. The strains isolated belonged to the genera of Penicillium, Aspergillus, Trichoderma, Spicaria and Hyaloflorae The distribution of observed isolated fungi were 41% in sewage sludge followed by 39% in wastewater and 20% in leachate. The predominant fungus was Penicillium (39 strains). The second and third most common isolates were Aspergillus (14 strains) and Trichoderma (12 strains). The other isolates were Spicaria (3 strains) and Hyaloflorae (2 strains). Three strains (WWZP1003, LZP3001, LZP3005) of Penicillium (P. corylophilum, P. waksmanii, and P. citrinum respectively), 2 strains (WWZA1006 and SS2017) of Aspergillus (A. terrues and A. flavus respectively) and one strain (SSZT2008) of Trichoderma (T. harzianum) were tentatively identified up to species level and finally verified by CABI Bioscience Identification Services, UK.

Analysis of heavy metals during composting of the tannery sludge using physicochemical and spectroscopic techniques

The major limitation of direct application of tannery sludge compost in agriculture is the total heavy metal contents and their bioavailability to the soil-plant system. This study focused on the heavy metal characterization and the influence of changing the physicochemical properties of the medium throughout the composting on the concentrations, bioavailability or chemical forms of Cr, Cu, Zn, Pb and Cd in tannery sludge. The study shows that throughout the 60 days of composting, physicochemical analysis and Fourier-transformed infrared (FTIR) spectroscopic characterization show that all parameters elaborated and reached relatively stable levels reflecting the stability and maturity of the final product, and revealed the biodegradation of components that can be easily assimilated by microorganism. The C/N ratio reaches the optimal range of stable compost; inorganic nitrogen is transformed into stable organic forms. The total concentration of Cr, Zn, Cu, Pb and Cd is very low rendering final compost acceptable for agricultural use. The germination index for both Chinese cabbage and lettuce was 97% after 60 days of composting, showing that the final compost was not phytotoxic. Furthermore, in using a sequential extraction method in sludge compost at different phases of treatment, a less than 2% of metals bound to bioavailable fractions X-(KNO(3)+H(2)O). A large proportion of the heavy metals were associated to the residual fraction (75-85%) and more resistant fractions to extraction X-NaOH, X-EDTA, X-HNO(3) (15-25%). Mobile fractions of metals are poorly predictable from the total content. Bioavailability of all fractions of elements tends to decrease.

Characteristics of slag produced from incinerated hospital waste

Ash produced from a hospital waste incinerator was treated using a high temperature melting process at 1200 degrees C. The quality of the produced slag was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), leaching tests and sequential chemical extraction of metals. The slag contained large amounts of SiO(2,) CaO, Al(2)O(3), Sn, Ni, Cu, Ba and B. XRD analysis revealed a moderate crystal structure for the melted slag and identified the main crystals as quartz (SiO(2)), kaolinite (Al(2)Si(2)O(5)(OH)(4)), albite (NaAlSi(3)O(8)) and gibbsite (Al(OH)(3)). The observed crystal structure assists in preventing the leaching of heavy metals from the slag. Furthermore, the leaching results found the produced slag to comply with disposal limits set by the US EPA. Results from sequential chemical extraction analysis showed that metals in the slag exhibited the strongest preference to be bound to the residual fraction (stable fraction), which is known to have very low leaching characteristics. Melting was found to stabilize heavy metals in hospital waste successfully and therefore it can be an acceptable method for disposal.

Organic dye adsorption on activated carbon derived from solid waste

Activated carbon was prepared through a chemical activation of bamboo waste precursor (BMAC) using phosphoric acid as the activating agent at 500°C for 2 h. Batch adsorption studies were carried out for the adsorption of C.I. Reactive Black 5 (RB5) onto the BMAC. The effect of various experimental parameters such as initial dye concentration (50–500 mg/L), contact time (0–32 h), pH (2–12), and temperature (30–50°C) were investigated. Equilibrium data were found to be very well represented by the Freundlich isotherm and a pseudo-second-order model was found to explain the kinetics of RB5 adsorption more effectively. The mechanism of the adsorption process was determined by the intraparticle diffusion model. Thermodynamic parameters such as standard enthalpy (ΔH°), standard entropy (ΔS°), standard free energy (ΔG°), and activation energy were determined. The results indicated that BMAC is a suitable adsorbent material for adsorption of reactive dye from aqueous solutions.

A preliminary study on Jatropha curcas as coagulant in wastewater treatment

Many coagulants, mainly inorganic, are widely used in conventional water and wastewater treatment. Recent studies reported the occurrence of some chronic diseases associated with residual coagulant in treated wastewater. The use of alternative coagulants which are biodegradable and environmentally friendly could alleviate the problem associated with these diseases. This work investigates the capability of Jatropha curcas seed and presscake (the residue left after oil extraction) to reduce the turbidity of wastewater through coagulation. The coagulant was prepared by dissolving Jatropha curcas seed and presscake powder into solution. Then jar tests were conducted on kaolin solution as the model wastewater. The Jatropha seed was found to be an effective coagulant with more than 96% of turbidity removal at pH 1–3 and pH 11–12. The highest turbidity removal was recorded at pH 3 using a dosage of 120 mg/L. The flocs formed using Jatropha were observed to be bigger and to sediment faster when compared with flocs formed using alum. The turbidity removal was high (>98%) at all turbidities (100 NTU to 8000 NTU), suggesting its suitability for a wide range of industrial wastewater. The performance of Jatropha presscake after extraction of oil was also comparable to the fresh seed and alum at highly acidic and highly alkaline conditions. The addition of Jatropha did not significantly affect the pH of the kaolin samples after treatment and the sludge volume produced was less in comparison to alum. These results strongly support the use of Jatropha curcas seed and presscake as a potential coagulant agent.

Bioenergy II: Production of Biodegradable Lubricant from Jatropha curcas and Trimethylolpropane

Jatropha oil has good potential as the renewable energy as well as lubricant feedstock. Production of Jatropha oil based lubricant was performed via a two-step process; (i) the transesterification of Jatropha oil to produce Jatropha Methyl Ester (JME) and, (ii) transesterification of JME with trimethylolpropane (TMP) under the presence of alkaline based catalyst. Transesterification of Jatropha oil was carried out at 65°C for 1 hour by using 1-2% NaOH as catalyst. While, the transesterification of JME was carried out at 150°C with pressure kept at 10mbar. The conversion of JME to jatropha biolubricant was found to be more than 80%. However, to maintain forward reaction, the amount of JME was maintained at about 4:1 ratios to TMP. The basic properties of jatropha biolubricant are found comparable to other plant based biolubricant.