B. Toussaint

On-line coupling of partial filling-capillary zone electrophoresis with mass spectrometry for the separation of clenbuterol enantiomers

The on‐line coupling of capillary zone electrophoresis with mass spectrometry (CZE‐MS) for the separation of enantiomers is hampered by the presence of nonvolatile chiral selectors such as cyclodextrins in the separation buffer. This problem can be overcome by use of the partial filling technique where only a part of the capillary is filled with the separation buffer containing chiral selectors. Since the electroosmotic flow is almost completely suppressed at acidic pH, that dimethyl‐β‐cyclodextrin is neutral, no free cyclodextrin would reach the MS detector when using a partially filled capillary. By this method, clenbuterol enantiomers were successfully resolved and separated from salbutamol (internal standard) in aqueous solution and in plasma samples. A solid‐phase extraction (SPE) was used for the preparation of plasma samples before analysis.

Enantiomeric Separation of Clenbuterol by Transient Isotachophoresis-Capillary Zone Electrophoresis-Uv Detection New Optimization Technique for Transient Isotachophoresis

A method for the in-line preconcentration and enantioseparation of clenbuterol by transient isotachophoresis-capillary zone electrophoresis-UV absorbance detection (transient ITP-CZE-UV) has been developed. It implies the use of dimethyl-beta-cyclodextrin as chiral selector and the application of a hydrodynamic counterflow during the ITP step. ITP is used to focus the sample constituents prior to CE whereas a counterpressure counterbalances the electrophoretic migration of the compounds. The sample is then focused and kept stationary in the proximity of the capillary inlet before CZE separation, leading to an extended-volume ITP-CZE system. A new strategy for the fast optimization of the counterpressure has been developed which implies the measurement of the hydrodynamic and electrophoretic velocities of the analyte during ITP. The in-line preconcentration and enantioseparation of clenbuterol selected as model compound was optimized using this method. Salbutamol was chosen as internal reference in order to check the reproducibility of the method. A 173-nl volume of aqueous ample solution was injected which implies an improvement of the injection volume of about 16 and a resolution of 4.8 was obtained for the clenbuterol enantiomers. A concentration detection limit of 10(-6) mol/l was readily achieved for clenbuterol and salbutamol using only 3 min ITP preconcentration in in-line counterflow transient ITP-CZE-UV. Thanks to its fast optimization, the method is applicable to any enantioseparation by means of only five very short preliminary measurements.

Automated determination of verapamil and norverapamil in human plasma with on-line coupling of dialysis to high-performance liquid chromatography and fluorometric detection

A fully automated method for the simultaneous determination of verapamil and its main metabolite norverapamil in human plasma is described. This method is based on on-line sample preparation using dialysis followed by clean-up and enrichment of the dialysate on a precolumn and subsequent HPLC analysis with fluorometric detection. All sample handling operations were performed automatically by a sample processor equipped with a robotic arm (ASTED system). The plasma samples were dialysed on a cellulose acetate membrane (cut-off: 15 kD) and the dialysate was purified and enriched on a short pre-column filled with cyanopropyl silica. Before starting dialysis, this trace enrichment column (TEC) was first conditioned with the HPLC mobile phase and then with pH 3.0 acetate buffer. 370 microliters of plasma sample spiked with the internal standard (gallopamil) were dialysed in the static-pulsed mode. The solution at the donor side was pH 3.0 acetate buffer containing Triton X-100 while the acceptor solution was made of the same acetate buffer. When dialysis was discontinued, the analytes were desorbed from the TEC by the HPLC mobile phase and transferred to the C18 analytical column by means of a switching valve. This mobile phase consisted of a mixture of acetonitrile, pH 3.0 acetate buffer and 2-aminoheptane. The influence of different parameters of the dialysis process on the recovery of verapamil and norverapamil has been studied. The effect of the volume, the aspirating and dispensing flow-rates of the dialysis solution has been investigated. The recoveries of verapamil and norverapamil in plasma were close to 75% and the limits of quantification were 5 ng/ml for both analytes. The method was found to be linear in the concentration range from 5 to 500 ng/ml (r2: 0.9996 for both analytes). The intra-day and inter-day reproducibilities at a concentration of 100 ng/ml were 2.3% and 5.6% for verapamil and 1.7% and 5.1% for norverapamil, respectively.

Enantioselective determination of oxprenolol in human plasma using dialysis coupled on-line to reversed-phase chiral liquid chromatography☆

A fully automated method for the determination of the enantiomers of oxprenolol in human plasma was developed, involving dialysis through a cellulose acetate membrane, clean-up and enrichment of the dialysate on a short precolumn and subsequent chiral liquid chromatographic (LC) analysis. All sample handling operations were executed automatically by a sample processor equipped with a robotic arm (ASTED system). The trace enrichment column (TEC) was packed with octadecylsilica. After conditioning of the TEC with the LC mobile phase and pH 3.0 acetate buffer. After the enrichment step, the analyte was transferred by the LC mobile phase to the analytical column by means of a switching valve. The influence of different parameters of the dialysis process on the recovery of oxprenolol was first investigated using achiral LC conditions. The volume as well as the aspirating and dispensing flow rates of the acceptor solution were the main parameters studied. Oxprenolol was separated on a C18 stationary phase used for the enantioseparation of oxprenolol was a Chiralcel OD-R column which contained cellulose tris (3,5-dimethylphenylcarbamate) coated on silica as chiral selector. The corresponding mobile phase consisted of a mixture of pH 6.0 phosphate buffer containing NaClO4 at 0.45 M concentration and acetonitrile (70:30 v/v). UV detection was performed at 273 nm. The method developed was validated. Recoveries for each enantiomer of oxprenolol were about 80%. The method was found to be linear in the 50-2500 ng ml-1 concentration range (r2 = 0.999 for both enantiomers) and good results with respect to intra- and inter-day reproducibility as well as accuracy were obtained.

Determination of the Enantiomers of 3-Tert.-Butylamino-1,2-Propanediol by High-Performance Liquid Chromatography Coupled to Evaporative Light Scattering Detection

A method for the separation and quantitation of the enantiomers of 3-tert.-butylamino-1,2-propanediol by high-performance liquid chromatography and evaporative light scattering detection has been developed. Separation of the enantiomers was performed in normal-phase liquid chromatography on a Chiralpak AS chiral stationary phase. The influence of the gas nature, gas pressure and temperature of the drift tube of the evaporative light scattering detector on the detection sensitivity was investigated. The method was validated in terms of linearity, limit of quantitation, accuracy and precision. The enantiomeric excess of (S)-3-tert.-butylamino-1,2-propanediol, used for the industrial synthesis of (S)-timolol, was measured from 0 to 94%.

Determination of the enantiomers of 3-tert.-butylamino-1,2-propanediol by high-performance liquid chromatography using mass spectrometric detection

The chiral synthesis of beta-blockers such as (S)-timolol requires a sensitive analytical method for the enantioseparation of its intermediate, 3-tert.-butylamino-1,2-propanediol, in the ng/ml range. The method developed is based on on-line normal-phase LC-MS-MS using a chiral stationary phase and an atmospheric pressure chemical ionization (APCI) interface. The MS detection of 3-tert.-butylamino-1,2-propanediol was first optimized with a pneumatically-assisted electrospray interface (ionspray). The APCI interface was then selected for LC-MS-MS because of the incompatibility of electrospray with n-hexane. The method was validated for both enantiomers in the 25-500 ng/ml concentration range.

Determination of L-lysine N-acetylcysteinate and its mono- and dimeric related compounds by liquid chromatography-mass spectrometry

Abstract Methods for the simultaneous determination of N-acetylcysteine, l -lysine, l -cysteine, l -cystine, N,N′-diacetylcystine and N,S-diacetylcysteine in aqueous solutions were developed. The method is based on the on-line coupling of liquid chromatography (LC) to tandem mass spectrometry (MS–MS) with an atmospheric pressure chemical ionisation (APCI) interface. The optimal LC phase system consisted of a C18 stationary phase and an acidic solution of formic acid in acetonitrile as the mobile phase, while d , l -phenylalanine was selected as an internal reference compound. The best transitions for MS–MS detection were selected after optimisation of the APCI ionisation yield in full scan. The optimisation was performed by loop injection. By coupling LC to MS–MS in the APCI+ (positive ion mode) as well as in the multiple reaction monitoring mode, satisfactory results were obtained with a mixture of the seven compounds, each at a concentration level of 1 μg/ml. For a further improvement of the detection limit of the dimeric compounds, electrospray ionisation was then investigated. By use of this interface a quantitation limit down to 10−8 M (3 ng/ml) could be achieved for both dimers. The developed method provides improved selectivity based on the combination of chromatography and mass spectrometry thus facilitating identification.