Barbara Molina-Moya

Clinical implications of molecular drug resistance testing for Mycobacterium tuberculosis: a TBNET/RESIST-TB consensus statement.

The emergence of drug-resistant strains of Mycobacterium tuberculosis is a challenge to global tuberculosis (TB) control. Although culture-based methods have been regarded as the gold standard for drug susceptibility testing (DST), molecular methods provide rapid information on mutations in the M. tuberculosis genome associated with resistance to anti-tuberculosis drugs. We ascertained consensus on the use of the results of molecular DST for clinical treatment decisions in TB patients. This document has been developed by TBNET and RESIST-TB groups to reach a consensus about reporting standards in the clinical use of molecular DST results. Review of the available literature and the search for evidence included hand-searching journals and searching electronic databases. The panel identified single nucleotide mutations in genomic regions of M. tuberculosis coding for katG, inhA, rpoB, embB, rrs, rpsL and gyrA that are likely related to drug resistance in vivo. Identification of any of these mutations in clinical isolates of M. tuberculosis has implications for the management of TB patients, pending the results of in vitro DST. However, false-positive and false-negative results in detecting resistance-associated mutations in drugs for which there is poor or unproven correlation between phenotypic and clinical drug resistance complicate the interpretation. Reports of molecular DST results should therefore include specific information on the mutations identified and provide guidance for clinicians on interpretation and on the choice of the appropriate initial drug regimen.

Diagnostic accuracy study of multiplex PCR for detecting tuberculosis drug resistance

OBJECTIVE To study the diagnostic accuracy of a multiplex real-time PCR (Anyplex II MTB/MDR/XDR, Seegene, Corea) that detects Mycobacterium tuberculosis resistant to isoniazid (INH), rifampicin (RIF), fluoroquinolones (FLQ) and injectable drugs (kanamycin [KAN], amikacin [AMK] and capreomycin [CAP]) in isolates and specimens. METHODS One hundred fourteen cultured isolates and 73 sputum specimens were retrospectively selected. Results obtained with multiplex PCR were compared with those obtained with BACTEC. Discordant results between multiplex PCR and BACTEC were tested by alternative molecular methods. RESULTS Sensitivity and specificity of multiplex PCR for detecting drug resistance in isolates were 76.5% and 100%, respectively, for INH; 97.2% and 96.0%, respectively, for RIF; 70.4% and 87.9%, respectively, for FLQ; 81.5% and 84.8%, respectively, for KAN; 100% and 60%, respectively, for AMK, and 100% and 72.3%, respectively, for CAP. Sensitivity and specificity of Anyplex for detecting drug resistance in specimens were 93.3% and 100%, respectively, for INH; 100% and 100%, respectively, for RIF; 50.0% and 100%, respectively, for FLQ; and 100% and 94.4%, respectively, for both KAN and CAP. Among the discordant results, 87.7% (71/81) of results obtained with the multiplex PCR were concordant with at least one of the alternative molecular methods. CONCLUSIONS This multiplex PCR may be a useful tool for the rapid identification of drug resistant tuberculosis in isolates and specimens, thus allowing an initial therapeutic approach. Nevertheless, for a correct management of patients, results should be confirmed by a phenotypic method.

AID TB resistance line probe assay for rapid detection of resistant Mycobacterium tuberculosis in clinical samples

OBJECTIVES To determine the sensitivity and specificity of AID TB Resistance line probe assay (AID Diagnostika, Germany) to detect Mycobacterium tuberculosis and its resistance to first- and second-line drugs in clinical samples using BACTEC 460TB as the reference standard. METHODS The test consists on three strips to detect resistance to isoniazid/rifampicin, fluoroquinolones/ethambutol, and kanamycin/amikacin/capreomycin/streptomycin, respectively. This test was performed on 65 retrospectively selected clinical samples corresponding to 32 patients. RESULTS A valid result was obtained for 92.3% (60/65), 90.8% (59/65) and 78.5% (51/65) of the samples tested, considering the three strips, respectively. Global concordance rates between AID and BACTEC for detecting resistance to isoniazid, rifampicin, fluoroquinolones, ethambutol, kanamycin/capreomycin and streptomycin were 98.3% (59/60), 100% (60/60), 91.5% (54/59), 72.9% (43/59), 100% (51/51) and 98.0% (50/51), respectively. Regarding the discordant results obtained between AID and BACTEC, the alternative molecular methods performed (GenoType MTBDRplus, GenoType MTBDRsl [Hain Lifescience, Germany] and/or pyrosequencing) confirmed the genotypic result in 90.9% (20/22) of the cases. CONCLUSIONS AID line probe assay is a useful tool for the rapid detection of drug resistance in clinical samples enabling an initial therapeutic approach. Nevertheless, for a correct management of drug resistant tuberculosis patients, molecular results should be confirmed by a phenotypic method.

Pyrosequencing for rapid detection of Mycobacterium tuberculosis second-line drugs and ethambutol resistance.

The aim of this work was to study the diagnostic accuracy of pyrosequencing to detect resistance to fluoroquinolones, kanamycin, amikacin, capreomycin, and ethambutol (EMB) in Mycobacterium tuberculosis clinical strains. One hundred four clinical isolates previously characterized by BACTEC 460TB/MGIT 960 were included. Specific mutations were targeted in gyrA, rrs, eis promoter, and embB. When there was a discordant result between BACTEC and pyrosequencing, Genotype MTBDRsl (Hain Lifescience, Nehren, Germany) was performed. Sensitivity and specificity of pyrosequencing were 70.6% and 100%, respectively, for fluoroquinolones; 93.3% and 81.7%, respectively, for kanamycin; 94.1% and 95.9%, respectively, for amikacin; 90.0% and 100%, respectively, for capreomycin; and 64.8% and 87.8%, respectively, for EMB. This study shows that pyrosequencing may be a useful tool for making early decisions regarding second-line drugs and EMB resistance. However, for a correct management of patients with suspected extensively drug-resistant tuberculosis, susceptibility results obtained by molecular methods should be confirmed by a phenotypic method.

FluoroType MTB system for the detection of pulmonary tuberculosis

Diagnosis continues to be a major barrier for the control of tuberculosis (TB), especially in low- and middle-income countries (LMIC) [1]. The number of platforms for the molecular diagnosis of TB have increased in recent years and they can provide test results more rapidly than culture. Molecular assays are increasingly being used as alternative or adjunct methods to culture and smear microscopy, and modern systems seek to partially or fully automate the DNA extraction and amplification steps, increasing their suitability for resource-limited laboratories. One of these platforms, the GeneXpert MTB/RIF (Cepheid, USA), has a sensitivity of roughly 85% compared to culture [2] and has seen significant uptake in developing countries [3]. However, as a fully closed system, the DNA extracted during the process cannot be used for further downstream drug susceptibility testing (DST), which is crucial for patients with suspected drug-resistant TB. FluoroType MTB is a sensitive test for TB but specificity is low compared with fully integrated molecular systems http://ow.ly/WhEO30b1luY

Molecular Characterization of Mycobacterium tuberculosis Strains with TB-SPRINT

We evaluated Tuberculosis-Spoligo-Rifampicin-Isoniazid Typing (TB-SPRINT), a microbead-based method for spoligotyping and detection of rifampicin and isoniazid resistance in Mycobacterium tuberculosis. For that, 67 M. tuberculosis complex strains were retrospectively selected. Membrane-based spoligotyping, restriction fragment length polymorphism, DNA sequencing/pyrosequencing of rpoB, katG, and inhA promoter, TB-SPRINT, and SNP typing were performed. Concordance between spoligotyping methods was 99.6% (2,785/2,795 spoligotype data points). For most of the discordant cases, the same lineage was assigned with both methods. Concordance between phenotypic drug susceptibility testing and TB-SPRINT for detecting rifampicin and isoniazid resistance was 98.4% (63/64) and 93.8% (60/64), respectively. Concordance between DNA sequencing/pyrosequencing and TB-SPRINT for detecting mutations in rpoB, katG, and inhA were 98.4% (60/61), 100% (64/64), and 96.9% (62/64), respectively. In conclusion, TB-SPRINT is a rapid and easy-to-perform assay for genotyping and detecting drug resistance in a single tube; therefore, it may be a useful tool to improve epidemiological surveillance.

Microbead-based spoligotyping of Mycobacterium tuberculosis from Ziehl-Neelsen-stained microscopy preparations in Ethiopia

The worldwide dissemination of Mycobacterium tuberculosis strains has led to the study of their genetic diversity. One of the most used genotyping methods is spoligotyping, based on the detection of spacers in the clustered regularly interspaced short palindromic repeats (CRISPR) locus. This study assessed the performance of a microbead-based spoligotyping assay using samples extracted from Ziehl-Neelsen-stained smear-microscopy preparations and described the genetic diversity of Mycobacterium tuberculosis among new TB patients in Southern Nations, Nationalities and Peoples’ Region (SNNPR) in Ethiopia. Among the 91 samples analysed, 59 (64.8%) generated spoligotyping patterns. Fifty (84.7%) samples were classified into 12 clusters (mostly Lineage 4 or 3) comprising 2–11 samples and nine had unique spoligotyping patterns. Among the 59 spoligotyping patterns, 25 belonged to the T1 sublineage, 11 to the T3-ETH, 5 to the URAL, 4 to the H3 and 14 to other L4 sublineages. There was a remarkable variation in genetic distribution in SNNPR compared to other regions of the country. Microbead-based spoligotyping is an easy-to-perform, high-throughput assay that can generate genotyping information using material obtained from smear microscopy preparations. The method provides an opportunity to obtain data of the M. tuberculosis genetic epidemiology in settings with limited laboratory resources.

PyroTyping, a novel pyrosequencing-based assay for Mycobacterium tuberculosis genotyping

We developed a novel method, PyroTyping, for discrimination of Mycobacterium tuberculosis isolates combining pyrosequencing and IS6110 polymorphism. A total of 100 isolates were analysed with IS6110-restriction fragment length polymorphism (RFLP), spoligotyping, mycobacterial interspersed repetitive units – variable number tandem repeats (MIRU-VNTR), and PyroTyping. PyroTyping results regarding clustering or discrimination of the isolates were highly concordant with the other typing methods performed. PyroTyping is more rapid than RFLP and presents the same discriminatory power, thus, it may be useful for taking timely decisions for tuberculosis control.

Evaluation of GenoFlow DR-MTB Array Test for Detection of Rifampin and Isoniazid Resistance in Mycobacterium tuberculosis

ABSTRACT The aim of this study was to evaluate the GenoFlow DR-MTB array test (DiagCor Bioscience, Hong Kong) on 70 cultured isolates and 50 sputum specimens. The GenoFlow array test showed good sensitivity and specificity compared to the phenotypic Bactec 460TB. This array accurately detected mutations in rpoB, katG, and inhA associated with resistance to rifampin and isoniazid.

Mycobacterium tuberculosis complex genotypes circulating in Nigeria based on spoligotyping obtained from Ziehl-Neelsen stained slides extracted DNA.

Tuberculosis (TB) remains one of the most threatening diseases and Nigeria has one of the world’s largest burdens. This study performed high-throughput spoligotyping directly on sputum smears to describe the Mycobacterium tuberculosis strains circulating among new TB patients in Nigeria. Methods All State TB control programmes in Nigeria were requested to submit 25–50 smear-positive Ziehl-Neelsen (ZN) stained slides for screening during 2013–2014. DNA was extracted from 929 slides for spoligotyping and drug-resistance analysis using microbead-based flow-cytometry suspension arrays. Results Spoligotyping results were obtained for 549 (59.1%) of 929 samples. Lineage 4 Cameroon sublineage (L4.6.2) represented half of the patterns, Mycobacterium africanum (L5 and L6) represented one fifth of the patterns, and all other lineages, including other L4 sublineages, represented one third of the patterns. Sublineage L4.6.2 was mostly identified in the north of the country whereas L5 was mostly observed in the south and L6 was scattered. The spatial distribution of genotypes had genetic geographic gradients. We did not obtain results enabling the detection of drug-resistance mutations. Conclusion/Significance We present the first national snapshot of the M. tuberculosis spoligotypes circulating in Nigeria based on ZN slides. Spoligotyping data can be obtained in a rapid and high-throughput manner with DNA extracted from ZN-stained slides, which may potentially improve our understanding of the genetic epidemiology of TB.