Beate Bersch

Direct inhibition by nitric oxide of the transcriptional ferric uptake regulation protein via nitrosylation of the iron.

Ferric uptake regulation protein (Fur) is a bacterial global regulator that uses iron as a cofactor to bind to specific DNA sequences. The function of Fur is not limited to iron homeostasis. A wide variety of genes involved in various mechanisms such as oxidative and acid stresses are under Fur control. Flavohemoglobin (Hmp) is an NO-detoxifying enzyme induced by NO and nitrosothiol compounds. Fur recently was found to regulate hmp in Salmonella typhimurium, and in Escherichia coli, the iron-chelating agent 2,2′-dipyridyl induces hmp expression. We now establish direct inhibition of E. coli Fur activity by NO. By using chromosomal Fur-regulated lacZ reporter fusion in E. coli, Fur activity is switched off by NO at micromolar concentration. In vitro Fur DNA-binding activity, as measured by protection of restriction site in aerobactin promoter, is directly sensitive to NO. NO reacts with FeII in purified FeFur protein to form a S = 1/2 low-spin FeFur–NO complex with a g = 2.03 EPR signal. Appearance of the same EPR signal in NO-treated cells links nitrosylation of the iron with Fur inhibition. The nitrosylated Fur protein is still a dimer and is stable in anaerobiosis but slowly decays in air. This inhibition probably arises from a conformational switch, leading to an inactive dimeric protein. These data establish a link between control of iron metabolism and the response to NO effects.

Oxonol VI as an optical indicator for membrane potentials in lipid vesicles

Experiments with large unilamellar dioleoylphosphatidylcholine vesicles were carried out in order to study the effect of membrane potential on the fluorescence of Oxonol VI. A partition equilibrium of dye between membrane and water was found to exist with a partition coefficient gamma identical to c lipid/c water of about 19,000 (at zero voltage). In the presence of an inside-positive membrane potential, the negatively charged dye accumulates in the intravesicular aqueous space according to a Nernst equilibrium. This leads to an increased adsorption of dye to the inner lipid monolayer and to a concomitant increase of fluorescence. The fluorescence change can be calibrated as a function of transmembrane voltage by generating a potassium diffusion potential in the presence of valinomycin. The intrinsic fluorescence of the membrane-bound dye is not affected by voltage; the whole influence of voltage on the fluorescence results from voltage-dependent partitioning of the dye between water and membrane. The voltage dependence of the apparent partition coefficient can be quantitatively described by a three-capacitor model in which the dye is assumed to bind to adsorption planes located on the hydrocarbon side of the membrane/solution interface. Oxonol VI was found to be suitable for detecting changes of membrane potential associated with the activity of the (Na+ + K+)-ATPase in reconstituted vesicles. When ATP is added to the external medium, pump molecules with the ATP-binding side facing outward become activated; this results in a translocation of net positive charge towards the vesicle interior. Under this condition, fluorescence changes corresponding to (inside-positive) potentials of up to 150-200 mV are observed. After the build-up of the membrane potential, a quasi-stationary state is reached in which the pump current is compensated by a back-flow of charge through passive conductance pathways.

Structural changes of Escherichia coli ferric uptake regulator during metal-dependent dimerization and activation explored by NMR and X-ray crystallography

Ferric uptake regulator (Fur) is a global bacterial regulator that uses iron as a cofactor to bind to specific DNA sequences. Escherichia coli Fur is usually isolated as a homodimer with two metal sites per subunit. Metal binding to the iron site induces protein activation; however the exact role of the structural zinc site is still unknown. Structural studies of three different forms of the Escherichia coli Fur protein (nonactivated dimer, monomer, and truncated Fur-(1-82)) were performed. Dimerization of the oxidized monomer was followed by NMR in the presence of a reductant (dithiothreitol) and Zn(II). Reduction of the disulfide bridges causes only local structure variations, whereas zinc addition to reduced Fur induces protein dimerization. This demonstrates for the first time the essential role of zinc in the stabilization of the quaternary structure. The secondary structures of the mono- and dimeric forms are almost conserved in the N-terminal DNA-binding domain, except for the first helix, which is not present in the nonactivated dimer. In contrast, the C-terminal dimerization domain is well structured in the dimer but appears flexible in the monomer. This is also confirmed by heteronuclear Overhauser effect data. The crystal structure at 1.8Å resolution of a truncated protein (Fur-(1-82)) is described and found to be identical to the N-terminal domain in the monomeric and in the metal-activated state. Altogether, these data allow us to propose an activation mechanism for E. coli Fur involving the folding/unfolding of the N-terminal helix.

Structural biology of C1: dissection of a complex molecular machinery

The classical pathway of complement is initiated by the C1 complex, a multimolecular protease comprising a recognition subunit (C1q) and two modular serine proteases (C1r and C1s) associated as a Ca2+‐dependent tetramer (C1s‐C1r‐C1r‐C1s). Early studies have allowed identification of specialized functional domains in these proteins and have led to low‐resolution models of the C1 complex. The objective of current studies is to gain deeper insights into the structure of C1, and the strategy used for this purpose mainly consists of dissecting the C1 components into modular fragments, in order to solve their three‐dimensional structure and establish the structural correlates of their function. The aim of this article is to provide an overview of the structural and functional information generated by this approach, with particular emphasis on the domains involved in the assembly, the recognition function, and the highly specific proteolytic properties of C1.

Optimized set of two-dimensional experiments for fast sequential assignment, secondary structure determination, and backbone fold validation of 13C/15N-labelled proteins

NMR experiments are presented which allow backbone resonance assignment, secondary structure identification, and in favorable cases also molecular fold topology determination from a series of two-dimensional 1H-15N HSQC-like spectra. The 1H-15N correlation peaks are frequency shifted by an amount ± ωX along the 15N dimension, where ωX is the Cα, Cβ, or Hα frequency of the same or the preceding residue. Because of the low dimensionality (2D) of the experiments, high-resolution spectra are obtained in a short overall experimental time. The whole series of seven experiments can be performed in typically less than one day. This approach significantly reduces experimental time when compared to the standard 3D-based methods. The here presented methodology is thus especially appealing in the context of high-throughput NMR studies of protein structure, dynamics or molecular interfaces.

Structure and functions of the interaction domains of C1r and C1s: keystones of the architecture of the C1 complex

C1r and C1s, the proteases responsible for activation and proteolytic activity of the C1 complex of complement, share similar overall structural organizations featuring five nonenzymic protein modules (two CUB modules surrounding a single EGF module, and a pair of CCP modules) followed by a serine protease domain. Besides highly specific proteolytic activities, both proteases exhibit interaction properties associated with their N-terminal regions. These properties include the ability to bind Ca2+ ions with high affinity, to associate with each other within a Ca2+-dependent C1s-C1r-C1r-C1s tetramer, and to interact with C1q upon C1 assembly. Precise functional mapping of these regions has been achieved recently, allowing identification of the domains responsible for these interactions, and providing a comprehensive picture of their structure and function. The objective of this article is to provide a detailed and up-to-date overview of the information available on these domains, which are keystones of the assembly of C1, and appear to play an essential role at the interface between the recognition function of C1 and its proteolytic activity.

CopK from Cupriavidus metallidurans CH34 binds Cu(I) in a tetrathioether site: characterization by X-ray absorption and NMR spectroscopy.

Cupriavidus metallidurans CH34 is a bacterium that is resistant to high metal concentrations in the environment. Increased copper resistance is associated with the cop cluster on the large plasmid pMOL30 that is composed of at least 21 genes. The copK gene encodes a 74 residue periplasmic protein whose expression is strongly upregulated in the presence of copper. CopK was previously shown to cooperatively bind Cu(I) and Cu(II) in distinct, specific sites. The solution structure of Cu(I)-CopK and the characterization of the Cu(I) site by X-ray absorption spectroscopy and NMR are reported here. EXAFS spectra are in agreement with a tetrathioether Cu(I) site, providing so far unique spectral information on a 4S-coordinated Cu(I) in a protein. The methionine residues forming the Cu(I) site, M28, M38, M44, and M54, are identified by NMR. We propose the chemical shift of the methionine C(epsilon) as a new and sensitive probe for the detection of Cu(I) bound to thioether groups. The solution structure of Cu(I)-CopK demonstrates that Cu(I) binding induces a complete structural modification with the disruption of the second beta-sheet and a rotation of the C-terminal part of nearly 180 degrees around a hinge formed by asparagine 57. This conformational change is directly related to the loss of the dimer interface and most probably to the formation of the Cu(II) site involving histidine 70. The solution structure of Cu(I)-CopK therefore provides the molecular basis for the understanding of the Cu(I)/Cu(II) binding cooperativity.

New insights into histidine triad proteins: solution structure of a Streptococcus pneumoniae PhtD domain and zinc transfer to AdcAII.

Zinc (Zn2+) homeostasis is critical for pathogen host colonization and invasion. Polyhistidine triad (Pht) proteins, located at the surface of various streptococci, have been proposed to be involved in Zn2+ homeostasis. The phtD gene, coding for a Zn2+-binding protein, is organized in an operon with adcAII coding for the extracellular part of a Zn2+ transporter. In the present work, we investigate the relationship between PhtD and AdcAII using biochemical and structural biology approaches. Immuno-precipitation experiments on purified membranes of Streptococcus pneumoniae (S. pneumoniae) demonstrate that native PhtD and AdcAII interact in vivo confirming our previous in vitro observations. NMR was used to demonstrate Zn2+ transfer from the Zn2+-bound form of a 137 amino acid N-terminal domain of PhtD (t-PhtD) to AdcAII. The high resolution NMR structure of t-PhtD shows that Zn2+ is bound in a tetrahedral site by histidines 83, 86, and 88 as well as by glutamate 63. Comparison of the NMR parameters measured for apo- and Zn2+-t-PhtD shows that the loss of Zn2+ leads to a diminished helical propensity at the C-terminus and increases the local dynamics and overall molecular volume. Structural comparison with the crystal structure of a 55-long fragment of PhtA suggests that Pht proteins are built from short repetitive units formed by three β-strands containing the conserved HxxHxH motif. Taken together, these results support a role for S. pneumoniae PhtD as a Zn2+ scavenger for later release to the surface transporter AdcAII, leading to Zn2+ uptake.

Molecular structure and metal-binding properties of the periplasmic CopK protein expressed in Cupriavidus metallidurans CH34 during copper challenge.

The copK gene is localized on the pMOL30 plasmid of Cupriavidus metallidurans CH34 within the complex cop cluster of genes, for which 21 genes have been identified. The expression of the corresponding periplasmic CopK protein is strongly upregulated in the presence of copper, leading to a high periplasmic accumulation. The structure and metal-binding properties of CopK were investigated by NMR and mass spectrometry. The protein is dimeric in the apo state with a dissociation constant in the range of 10(-5) M estimated from analytical ultracentrifugation. Mass spectrometry revealed that CopK has two high-affinity Cu(I)-binding sites per monomer with different Cu(I) affinities. Binding of Cu(II) was observed but appeared to be non-specific. The solution structure of apo-CopK revealed an all-beta fold formed of two beta-sheets in perpendicular orientation with an unstructured C-terminal tail. The dimer interface is formed by the surface of the C-terminal beta-sheet. Binding of the first Cu(I)-ion induces a major structural modification involving dissociation of the dimeric apo-protein. Backbone chemical shifts determined for the 1Cu(I)-bound form confirm the conservation of the N-terminal beta-sheet, while the last strand of the C-terminal sheet appears in slow conformational exchange. We hypothesize that the partial disruption of the C-terminal beta-sheet is related to dimer dissociation. NH-exchange data acquired on the apo-protein are consistent with a lower thermodynamic stability of the C-terminal sheet. CopK contains seven methionine residues, five of which appear highly conserved. Chemical shift data suggest implication of two or three methionines (Met54, Met38, Met28) in the first Cu(I) site. Addition of a second Cu(I) ion further increases protein plasticity. Comparison of the structural and metal-binding properties of CopK with other periplasmic copper-binding proteins reveals two conserved features within these functionally related proteins: the all-beta fold and the methionine-rich Cu(I)-binding site.

Proton-Detected Solid-State NMR Spectroscopy of a Zinc Diffusion Facilitator Protein in Native Nanodiscs

The structure, dynamics, and function of membrane proteins are intimately linked to the properties of the membrane environment in which the proteins are embedded. For structural and biophysical characterization, membrane proteins generally need to be extracted from the membrane and reconstituted in a suitable membrane-mimicking environment. Ensuring functional and structural integrity in these environments is often a major concern. The styrene/maleic acid co-polymer has recently been shown to be able to extract lipid/membrane protein patches directly from native membranes to form nanosize discoidal proteolipid particles, also referred to as native nanodiscs. In this work, we show that high-resolution solid-state NMR spectra can be obtained from an integral membrane protein in native nanodiscs, as exemplified by the 2×34 kDa bacterial cation diffusion facilitator CzcD.