Beatriz Orihuela

Characterization of the Adhesive Plaque of the Barnacle Balanus amphitrite: Amyloid-Like Nanofibrils Are a Major Component

The nanoscale morphology and protein secondary structure of barnacle adhesive plaques were characterized using atomic force microscopy (AFM), far-UV circular dichroism (CD) spectroscopy, transmission Fourier transform infrared (FTIR) spectroscopy, and Thioflavin T (ThT) staining. Both primary cement (original cement laid down by the barnacle) and secondary cement (cement used for reattachment) from the barnacle Balanus amphitrite (= Amphibalanus amphitrite) were analyzed. Results showed that both cements consisted largely of nanofibrillar matrices having similar composition. Of particular significance, the combined results indicate that the nanofibrillar structures are consistent with amyloid, with globular protein components also identified in the cement. Potential properties, functions, and formation mechanisms of the amyloid-like nanofibrils within the adhesive interface are discussed. Our results highlight an emerging trend in structural biology showing that amyloid, historically associated with disease, also has functional roles.

Bioinspired Surfaces with Dynamic Topography for Active Control of Biofouling

Dynamic change of the surface area and topology of elastomers is used as a general, environmentally friendly approach for effectively detaching micro- and macro-fouling organisms adhered on the elastomer surfaces. Deformation of elastomer surfaces under electrical or pneumatic actuation can debond various biofilms and barnacles. The bio-inspired dynamic surfaces can be fabricated over large areas through simple and practical processes. This new mechanism is complementary with existing materials and methods for biofouling control.

Barnacle cement: a polymerization model based on evolutionary concepts

SUMMARY Enzymes and biochemical mechanisms essential to survival are under extreme selective pressure and are highly conserved through evolutionary time. We applied this evolutionary concept to barnacle cement polymerization, a process critical to barnacle fitness that involves aggregation and cross-linking of proteins. The biochemical mechanisms of cement polymerization remain largely unknown. We hypothesized that this process is biochemically similar to blood clotting, a critical physiological response that is also based on aggregation and cross-linking of proteins. Like key elements of vertebrate and invertebrate blood clotting, barnacle cement polymerization was shown to involve proteolytic activation of enzymes and structural precursors, transglutaminase cross-linking and assembly of fibrous proteins. Proteolytic activation of structural proteins maximizes the potential for bonding interactions with other proteins and with the surface. Transglutaminase cross-linking reinforces cement integrity. Remarkably, epitopes and sequences homologous to bovine trypsin and human transglutaminase were identified in barnacle cement with tandem mass spectrometry and/or western blotting. Akin to blood clotting, the peptides generated during proteolytic activation functioned as signal molecules, linking a molecular level event (protein aggregation) to a behavioral response (barnacle larval settlement). Our results draw attention to a highly conserved protein polymerization mechanism and shed light on a long-standing biochemical puzzle. We suggest that barnacle cement polymerization is a specialized form of wound healing. The polymerization mechanism common between barnacle cement and blood may be a theme for many marine animal glues.

Nanoscale structures and mechanics of barnacle cement.

Polymerized barnacle glue was studied by atomic force microscopy (AFM), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and chemical staining. Nanoscale structures exhibiting rod-shaped, globular and irregularly-shaped morphologies were observed in the bulk cement of the barnacle Amphibalanus amphitrite (=Balanus amphitrite) by AFM. SEM coupled with energy dispersive X-ray (EDX) provided chemical composition information, making evident the organic nature of the rod-shaped nanoscale structures. FTIR spectroscopy gave signatures of β-sheet and random coil conformations. The mechanical properties of these nanoscale structures were also probed using force spectroscopy and indentation with AFM. Indentation data yielded higher elastic moduli for the rod-shaped structures when compared with the other structures in the bulk cement. Single molecule AFM force-extension curves on the matrix of the bulk cement often exhibited a periodic sawtooth-like profile, observed in both the extend and retract portions of the force curve. Rod-shaped structures stained with amyloid protein-selective dyes (Congo red and thioflavin-T) revealed that about 5% of the bulk cement were amyloids. A dominant 100 kDa cement protein was found to be mechanically agile, using repeating hydrophobic structures that apparently associate within the same protein or with neighbors, creating toughness on the 1–100 nm length scale.

Barnacle reattachment: a tool for studying barnacle adhesion.

Standard approaches for measuring adhesion strength of fouling organisms use barnacles, tubeworms or oysters settled and grown in the field or laboratory, to a measurable size. These approaches suffer from the vagaries of larval supply, settlement behavior, predation, disturbance and environmental stress. Procedures for reattaching barnacles to experimental surfaces are reported. When procedures are followed, adhesion strength measurements on silicone substrata after 2 weeks are comparable to those obtained using standard methods. Hydrophilic surfaces require reattachment for 2–4 weeks. The adhesion strength of barnacles in reattachment assays was positively correlated to results obtained from field testing a series of experimental polysiloxane fouling-release coatings (r = 0.89). The reattachment method allows for precise barnacle orientation, enabling the use of small surfaces and the potential for automation. The method enables down-selection of coatings from combinatorial approaches to manageable levels for definitive field testing. Reattachment can be used with coatings that combine antifouling and fouling-release technologies.

Orientation of blue crab, Callinectes sapidus (Rathbun), megalopae : Responses to visual and chemical cues

Post-larvae (megalopae) of the blue crab Callinectes sapidus are transported from offshore areas into estuaries where they settle and metamorphose in specific areas, such as seagrass beds. The present study tested the hypothesis that intermolt and premolt megalopae had different behavioral responses to visual and chemical cues that are associated with predator avoidance and settlement. Visually directed movements to solid and striped rectangular targets subtending different visual angles (5–350°) were tested in an arena in the presence of either Offshore Water, Seagrass (Zostera marina) Odor Water or Predator (Fundulus heteroclitus) Odor Water. Intermolt megalopae generally swam away from 10° to 180° targets in all water types which was interpreted as a predator avoidance response. Premolt megalopae had similar behavior in Offshore and Seagrass Odor Water. However in Predator Odor water, they displayed different predator avoidance behavior. When presented with a solid target, premolt megalopae either remained motionless or swam directly away from the target. If presented with targets resembling stalks of seagrass (vertical stripes), they swam in all directions which was interpreted as a startle response. In a chemical choice chamber, both molt stages were not attracted to Seagrass Odor Water but avoided Predator Odor Water. There was no evidence that megalopae used chemical cues for orientation toward settlement sites. Thus, the hypothesis was supported and the results suggest that behavioral responses to the test chemical and visual cues are involved in predator avoidance.

Variation among families for characteristics of the adhesive plaque in the barnacle Balanus amphitrite

A quantitative genetics approach was used to examine variation in the characteristics of the adhesive plaque of the barnacle Balanus amphitrite Darwin attached to two silicone substrata. Barnacles settled on silicone polymer films occasionally form thick, soft adhesive plaques, in contrast to the thin, hard plaques characteristic of attachment to other surfaces. The proportion of barnacles producing a thick adhesive plaque was 0.31 for Veridian, a commercially available silicone fouling-release coating, and 0.18 for Silastic T-2, a silicone rubber used for mold-making. For both materials, significant variation among maternal families in the proportion of barnacles producing a thick adhesive plaque was observed, which suggests the presence of genetic variation, or maternal environmental effects, for this plaque characteristic. For the Veridian coating, barnacles expressing the thick adhesive plaque also exhibited significantly reduced tenacity. This represents the first reported case for potential genetic control of intraspecific phenotypic variation in the physical characteristics and tenacity of the adhesive of a fouling invertebrate.

In situ ATR–FTIR characterization of primary cement interfaces of the barnacle Balanus amphitrite

A method is presented for characterizing primary cement interfaces of barnacles using in situ attenuated total reflection–Fourier transform infrared spectroscopy. Primary cement of the barnacle, Balanus amphitrite (Amphibalanus amphitrite), was characterized without any disruption to the original cement interface, after settling and growing barnacles directly on double sided polished germanium wafers. High-quality IR spectra were acquired of live barnacle cement interfaces, providing a spectroscopic fingerprint of cured primary cement in vivo with the barnacle adhered to the substratum. Additional spectra were also acquired of intact cement interfaces for which the upper portion of the barnacle had been removed leaving only the base plate and cement layer attached to the substratum. This allowed further characterization of primary cement interfaces that were dried or placed in D2O. The resulting spectra were consistent with the cement being proteinaceous, and allowed analysis of the protein secondary structure and water content in the cement layer. The estimated secondary structure composition was primarily β-sheet, with additional α-helix, turn and unordered components. The cement of live barnacles, freshly removed from seawater, was estimated to have a water content of 20–50% by weight. These results provide new insights into the chemical properties of the undisturbed barnacle adhesive interface.

Noradrenaline-functionalized hyperbranched fluoropolymer-poly(ethylene glycol) cross-linked networks as dual-mode, anti-biofouling coatings.

The strategy of decorating antibiofouling hyperbranched fluoropolymer-poly(ethylene glycol) (HBFP-PEG) networks with a settlement sensory deterrent, noradrenaline (NA), and the results of biofouling assays are presented. This example of a dual-mode surface, which combines both passive and active modes of antibiofouling, works in synergy to improve the overall antibiofouling efficiency against barnacle cyprids. The HBFP-PEG polymer surface, prior to modification with NA, was analyzed by atomic force microscopy, and a significant distribution of topographical features was observed, with a nanoscopic roughness measurement of 110 ± 8 nm. NA attachment to the surface was probed by secondary ion mass spectrometry to quantify the extent of polymer chain-end substitution with NA, where a 3- to 4-fold increase in intensity for a fragment ion associated with NA was observed and 39% of the available sites for attachment were substituted. Cytoskeletal assays confirmed the activity of tethered NA on adhering oyster hemocytes. Settlement assays showed deterrence toward barnacle cyprid settlement, while not compromising the passive biofouling resistance of the surface. This robust strategy demonstrates a methodology for the incorporation of actively antibiofouling moieties onto a passively antibiofouling network.

Synergistic roles for lipids and proteins in the permanent adhesive of barnacle larvae

Thoracian barnacles rely heavily upon their ability to adhere to surfaces and are environmentally and economically important as biofouling pests. Their adhesives have unique attributes that define them as targets for bio-inspired adhesive development. With the aid of multi-photon and broadband coherent anti-Stokes Raman scattering microscopies, we report that the larval adhesive of barnacle cyprids is a bi-phasic system containing lipids and phosphoproteins, working synergistically to maximize adhesion to diverse surfaces under hostile conditions. Lipids, secreted first, possibly displace water from the surface interface creating a conducive environment for introduction of phosphoproteins while simultaneously modulating the spreading of the protein phase and protecting the nascent adhesive plaque from bacterial biodegradation. The two distinct phases are contained within two different granules in the cyprid cement glands, implying far greater complexity than previously recognized. Knowledge of the lipidic contribution will hopefully inspire development of novel synthetic bioadhesives and environmentally benign antifouling coatings.