Begoña Monterroso

Elucidation of the Molecular Recognition of Bacterial Cell Wall by Modular Pneumococcal Phage Endolysin CPL-1 *□

Pneumococcal bacteriophage-encoded lysins are modular proteins that have been shown to act as enzymatic antimicrobial agents (enzybiotics) in treatment of streptococcal infections. The first x-ray crystal structures of the Cpl-1 lysin, encoded by the pneumococcal phage Cp-1, in complex with three bacterial cell wall peptidoglycan (PG) analogues are reported herein. The Cpl-1 structure is folded in two well defined modules, one responsible for anchoring to the pneumococcal cell wall and the other, a catalytic module, that hydrolyzes the PG. Conformational rearrangement of Tyr-127 is a critical event in molecular recognition of a stretch of five saccharide rings of the polymeric peptidoglycan (cell wall). The PG is bound at a stretch of the surface that is defined as the peptidoglycan-binding sites 1 and 2, the juncture of which catalysis takes place. The peptidoglycan-binding site 1 binds to a stretch of three saccharides of the peptidoglycan in a conformation essentially identical to that of the peptidoglycan in solution. In contrast, binding of two peptidoglycan saccharides at the peptidoglycan-binding site 2 introduces a kink into the solution structure of the peptidoglycan, en route to catalytic turnover. These findings provide the first structural evidence on recognition of the peptidoglycan and shed light on the discrete events of cell wall degradation by Cpl-1.

Structural and thermodynamic characterization of Pal, a phage natural chimeric lysin active against pneumococci.

Pal amidase, encoded by pneumococcal bacteriophage Dp-1, represents one step beyond in the modular evolution of pneumococcal murein hydrolases. It exhibits the choline-binding module attaching pneumococcal lysins to the cell wall, but the catalytic module is different from those present in the amidases coded by the host or other pneumococcal phages. Pal is also an effective antimicrobial agent against Streptococcus pneumoniae that may constitute an alternative to antibiotic prophylaxis. The structural implications of Pal singular structure and their effect on the choline-amidase interactions have been examined by means of several techniques. Pal stability is maximum around pH 8.0 (Tm ≅ 50.2 °C; ΔHt = 183 ± 4 kcal mol–1), and its constituting modules fold as two tight interacting cooperative units whose denaturation merges into a single process in the free amidase but may proceed as two well resolved events in the choline-bound state. Choline titration curves reflect low energy ligand-protein interactions and are compatible with two sets of sites. Choline binding strongly stabilizes the cell wall binding module, and the conformational stabilization is transmitted to the catalytic region. Moreover, the high proportion of aggregates formed by the unbound amidase together with choline preferential interaction with Pal dimers suggest the existence of marginally stable regions that would become stabilized through choline-protein interactions without significantly modifying Pal secondary structure. This structural rearrangement may underlie in vitro “conversion” of Pal from the low to the full activity form triggered by choline. The Pal catalytic module secondary structure could denote folding conservation within pneumococcal lytic amidases, but the number of functional choline binding sites is reduced (2–3 sites per monomer) when compared with pneumococcal LytA amidase (4–5 sites per monomer) and displays different intermodular interactions.

Development of a homogeneous fluorescence anisotropy assay to monitor and measure FtsZ assembly in solution.

We present here a fluorescence anisotropy method for the quantification of the polymerization of FtsZ, an essential protein for cytokinesis in prokaryotes whose GTP-dependent assembly initiates the formation of the divisome complex. Using Alexa 488 labeled wild-type FtsZ as a tracer, the assay allows determination of the critical concentration of FtsZ polymerization from the dependence of the measured steady-state fluorescence anisotropy on the concentration of FtsZ. The incorporation of the labeled protein into FtsZ polymers and the lack of spectral changes on assembly were independently confirmed by time-resolved fluorescence and fluorescence correlation spectroscopy. Critical concentration values determined by this new assay are compatible with those reported previously under the same conditions by other well-established methods. As a proof of principle, data on the sensitivity of the assay to changes in FtsZ assembly in response to Mg(2+) concentration or to the presence of high concentrations of Ficoll 70 as crowding agent are shown. The proposed method is sensitive, low sample consuming, rapid, and reliable, and it can be extended to other cooperatively polymerizing systems. In addition, it can help to discover new antimicrobials that may interfere with FtsZ polymerization because it can be easily adapted to systematic screening assays.

Isolation, Characterization and Lipid-Binding Properties of the Recalcitrant FtsA Division Protein from Escherichia coli

We have obtained milligram amounts of highly pure Escherichia coli division protein FtsA from inclusion bodies with an optimized purification method that, by overcoming the reluctance of FtsA to be purified, surmounts a bottleneck for the analysis of the molecular basis of FtsA function. Purified FtsA is folded, mostly monomeric and interacts with lipids. The apparent affinity of FtsA binding to the inner membrane is ten-fold higher than to phospholipids, suggesting that inner membrane proteins could modulate FtsA-membrane interactions. Binding of FtsA to lipids and membranes is insensitive to ionic strength, indicating that a net contribution of hydrophobic interactions is involved in the association of FtsA to lipid/membrane structures.

Characterization of Ejl, the cell‐wall amidase coded by the pneumococcal bacteriophage Ej‐1

The Ejl amidase is coded by Ej‐1, a temperate phage isolated from the atypical pneumococcus strain 101/87. Like all the pneumococcal cell‐wall lysins, Ejl has a bimodular organization; the catalytic region is located in the N‐terminal module, and the C‐terminal module attaches the enzyme to the choline residues of the pneumococcal cell wall. The structural features of the Ejl amidase, its interaction with choline, and the structural changes accompanying the ligand binding have been characterized by CD and IR spectroscopies, differential scanning calorimetry, analytical ultracentrifugation, and FPLC. According to prediction and spectroscopic (CD and IR) results, Ejl would be composed of short β‐strands (ca. 36%) connected by long loops (ca. 17%), presenting only two well‐predicted α‐helices (ca. 12%) in the catalytic module. Its polypeptide chain folds into two cooperative domains, corresponding to the N‐ and C‐terminal modules, and exhibits a monomer ↔ dimer self‐association equilibrium. Choline binding induces small rearrangements in Ejl secondary structure but enhances the amidase self‐association by preferential binding to Ejl dimers and tetramers. Comparison of LytA, the major pneumococcal amidase, with Ejl shows that the sequence differences (15% divergence) strongly influence the amidase stability, the organization of the catalytic module in cooperative domains, and the self‐association state induced by choline. Moreover, the ligand affinity for the choline‐binding locus involved in regulation of the amidase dimerization is reduced by a factor of 10 in Ejl. Present results evidence that sequence differences resulting from the natural variability found in the cell wall amidases coded by pneumococcus and its bacteriophages may significantly alter the protein structure and its attachment to the cell wall.

Insights into the Structure-Function Relationships of Pneumococcal Cell Wall Lysozymes, LytC and Cpl-1

The LytC lysozyme belongs to the autolytic system of Streptococcus pneumoniae and carries out a slow autolysis with optimum activity at 30 °C. Like all pneumococcal murein hydrolases, LytC is a modular enzyme. Its mature form comprises a catalytic module belonging to the GH25 family of glycosyl-hydrolases and a cell wall binding module (CBM), made of 11 sequence repeats, that is essential for activity and specifically targets choline residues present in pneumococcal lipoteichoic and teichoic acids. Here we show that the catalytic module is natively folded, and its thermal denaturation takes place at 45.4 °C. However, the CBM is intrinsically unstable, and the ultimate folding and stabilization of the active, monomeric form of LytC relies on choline binding. The complex formation proceeds in a rather slow way, and all sites (8.0 ± 0.5 sites/monomer) behave as equivalent (Kd = 2.7 ± 0.3 mm). The CBM stabilization is, nevertheless, marginal, and irreversible denaturation becomes measurable at 37 °C even at high choline concentration, compromising LytC activity. In contrast, the Cpl-1 lysozyme, a homologous endolysin encoded by pneumococcal Cp-1 bacteriophage, is natively folded in the absence of choline and has maximum activity at 37 °C. Choline binding is fast and promotes Cpl-1 dimerization. Coupling between choline binding and folding of the CBM of LytC indicates a high conformational plasticity that could correlate with the unusual alternation of short and long choline-binding repeats present in this enzyme. Moreover, it can contribute to regulate LytC activity by means of a tight, complementary binding to the pneumococcal envelope, a limited motility, and a moderate resistance to thermal denaturation that could also account for its activity versus temperature profile.

Effect of High Concentration of Inert Cosolutes on the Refolding of an Enzyme CARBONIC ANHYDRASE B IN SUCROSE AND FICOLL 70

The kinetics of refolding of carbonic anhydrase II following transfer from a buffer containing 5 m guanidinium chloride to a buffer containing 0.5 m guanidinium chloride were studied by measuring the time-dependent recovery of enzymatic activity. Experiments were carried out in buffer containing concentrations of two “inert” cosolutes, sucrose and Ficoll 70, a sucrose polymer, at concentrations up to 150 g/liter. Data analysis indicates that both cosolutes significantly accelerate the rate of refolding to native or compact near-native conformations, but decrease the fraction of catalytically active enzyme recovered in the limit of long time. According to the simplest model that fits the data, both cosolutes accelerate a competing side reaction yielding inactive compact species. Acceleration of the side reaction by Ficoll is significantly greater than that of sucrose at equal w/v concentrations.

MinC protein shortens FtsZ protofilaments by preferentially interacting with GDP-bound subunits.

Background: The MinC protein of the site selection Min system targets FtsZ to prevent polar division ring formation. Results: At similar MinC concentrations, MinC protein shortens FtsZ protofilaments and interacts preferentially with GDP-bound FtsZ. Conclusion: MinC disrupts FtsZ protofilaments by specifically targeting FtsZ-GDP subunits. Significance: Biophysical analysis reveals how MinC disrupts FtsZ filaments in solution. The interaction of MinC with FtsZ and its effects on FtsZ polymerization were studied under close to physiological conditions by a combination of biophysical methods. The Min system is a widely conserved mechanism in bacteria that ensures the correct placement of the division machinery at midcell. MinC is the component of this system that effectively interacts with FtsZ and inhibits the formation of the Z-ring. Here we report that MinC produces a concentration-dependent reduction in the size of GTP-induced FtsZ protofilaments (FtsZ-GTP) as demonstrated by analytical ultracentrifugation, dynamic light scattering, fluorescence correlation spectroscopy, and electron microscopy. Our experiments show that, despite being shorter, FtsZ protofilaments maintain their narrow distribution in size in the presence of MinC. The protein had the same effect regardless of its addition prior to or after FtsZ polymerization. Fluorescence anisotropy measurements indicated that MinC bound to FtsZ-GDP with a moderate affinity (apparent KD ∼10 μm at 100 mm KCl and pH 7.5) very close to the MinC concentration corresponding to the midpoint of the inhibition of FtsZ assembly. Only marginal binding of MinC to FtsZ-GTP protofilaments was observed by analytical ultracentrifugation and fluorescence correlation spectroscopy. Remarkably, MinC effects on FtsZ-GTP protofilaments and binding affinity to FtsZ-GDP were strongly dependent on ionic strength, being severely reduced at 500 mm KCl compared with 100 mm KCl. Our results support a mechanism in which MinC interacts with FtsZ-GDP, resulting in smaller protofilaments of defined size and having the same effect on both preassembled and growing FtsZ protofilaments.

Combined analytical ultracentrifugation, light scattering and fluorescence spectroscopy studies on the functional associations of the bacterial division FtsZ protein

The combined application of different biophysical techniques - analytical ultracentrifugation, light scattering and fluorescence-based assays - to study the ligand-linked self-association and assembly properties of the cell division protein FtsZ from Escherichia coli is described. These reactions are thought to be important for the formation of the dynamic division ring that drives bacterial cytokinesis. In addition, the use of this orthogonal experimental approach to measure the interactions between FtsZ oligomers (GDP forms) and polymers (GTP forms) with two variants (a soluble form and a full-length protein incorporated in phospholipid bilayer nanodiscs) of the ZipA protein, which provides membrane tethering to FtsZ, is described as well. The power of a global analysis of the results obtained from complementary biophysical methods to discriminate among alternative self- and hetero-associating schemes and to propose a more robust description of the association reactions involved is emphasized. This orthogonal approach will contribute to complete our quantitative understanding of the initial events of bacterial division.

Unravelling the structure of the pneumococcal autolytic lysozyme

The LytC lysozyme of Streptococcus pneumoniae forms part of the autolytic system of this important pathogen. This enzyme is composed of a C-terminal CM (catalytic module), belonging to the GH25 family of glycosyl hydrolases, and an N-terminal CBM (choline-binding module), made of eleven homologous repeats, that specifically recognizes the choline residues that are present in pneumococcal teichoic and lipoteichoic acids. This arrangement inverts the general assembly pattern of the major pneumococcal autolysin, LytA, and the lytic enzymes encoded by pneumococcal bacteriophages that place the CBM (made of six repeats) at the C-terminus. In the present paper, a three-dimensional model of LytC built by homology modelling of each module and consistent with spectroscopic and hydrodynamic studies is shown. In addition, the putative catalytic-pair residues are identified. Despite the inversion in the modular arrangement, LytC and the bacteriophage-encoded Cpl-1 lysozyme most probably adopt a similar global fold. However, the distinct choline-binding ability and their substrate-binding surfaces may reflect a divergent evolution directed by the different roles played by them in the host (LytC) or in the bacteriophage (Cpl-1). The tight binding of LytC to the pneumococcal envelope, mediated by the acquisition of additional choline-binding repeats, could facilitate the regulation of the potentially suicidal activity of this autolysin. In contrast, a looser attachment of Cpl-1 to the cell wall and the establishment of more favourable interactions between its highly negatively charged catalytic surface and the positively charged chains of pneumococcal murein could enhance the lytic activity of the parasite-encoded enzyme and therefore liberation of the phage progeny.