Belén Martín-Matute

A Highly Active Bifunctional Iridium Complex with an Alcohol/Alkoxide-Tethered N-Heterocyclic Carbene for Alkylation of Amines with Alcohols

A series of new iridium(III) complexes containing bidentate N-heterocyclic carbenes (NHC) functionalized with an alcohol or ether group (NHC-OR, R = H, Me) were prepared. The complexes catalyzed the alkylation of anilines with alcohols as latent electrophiles. In particular, biscationic Ir(III) complexes of the type [Cp*(NHC-OH)Ir(MeCN)](2+)2[BF(4)(-)] afforded higher-order amine products with very high efficiency; up to >99% yield using a 1:1 ratio of reactants and 1-2.5 mol % of Ir, in short reaction times (2-16 h) and under base-free conditions. Quantitative yields were also obtained at 50 °C, although longer reaction times (48-60 h) were needed. A large variety of aromatic amines have been alkylated with primary and secondary alcohols. The reactivity of structurally related iridium(III) complexes was also compared to obtain insights into the mechanism and into the structure of possible catalytic intermediates. The Ir(III) complexes were stable towards oxygen and moisture, and were characterized by NMR, HRMS, single-crystal X-ray diffraction, and elemental analyses.

Enantioselective synthesis of alcohols and amines by iridium-catalyzed hydrogenation, transfer hydrogenation, and related processes.

The preparation of chiral alcohols and amines by using iridium catalysis is reviewed. The methods presented include the reduction of ketones or imines by using hydrogen (hydrogenations), isopropanol, formic acid, or formate (transfer hydrogenations). Also dynamic and oxidative kinetic resolutions leading to chiral alcohols and amines are included. Selected literature reports from early contributions to December 2012 are discussed.

Allylic alcohols as synthetic enolate equivalents: isomerisation and tandem reactions catalysed by transition metal complexes.

Allylic alcohols can be isomerised into carbonyl compounds by transition metal complexes. In the last few years, catalyst design and development have resulted in highly efficient isomerisations under mild reaction conditions, including enantioselective versions. In addition, the isomerisation of allylic alcohols has been combined with C-C bond forming reactions when electrophiles such as aldehydes or imines were present in the reaction mixture. Also, C-F bonds can be formed when electrophilic fluorinating reagents are used. Thus, allylic alcohols can be treated as latent enol(ate)s. In this article, we highlight the latest developments concerning the isomerisation of allylic alcohols into carbonyl compounds, focusing in particular on tandem isomerisation/C-C or C-heteroatom bond formation processes. Significant attention is given to the mechanistic aspects of the reactions.

Selective Alkylation of (Hetero)Aromatic Amines with Alcohols Catalyzed by a Ruthenium Pincer Complex

A readily available pincer ruthenium(II) complex catalyzes the selective monoalkylation of (hetero)aromatic amines with a wide range of primary alcohols (including pyridine-, furan-, and thiophene-substituted alcohols) with high efficiency when used in low catalyst loadings (1 mol %). Tertiary amine formation via polyalkylation does not occur, making this ruthenium system an excellent catalyst for the synthesis of sec-amines.

Sustainable catalysis: rational Pd loading on MIL-101Cr-NH2 for more efficient and recyclable Suzuki-Miyaura reactions.

Palladium nanoparticles have been immobilized into an amino-functionalized metal–organic framework (MOF), MIL-101Cr-NH2, to form Pd@MIL-101Cr-NH2. Four materials with different loadings of palladium have been prepared (denoted as 4-, 8-, 12-, and 16 wt %Pd@MIL-101Cr-NH2). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), N2-sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL-101Cr-NH2, electron tomography was employed to reconstruct the 3D volume of 8 wt %Pd@MIL-101Cr-NH2 particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high-energy X-rays (60 keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki–Miyaura cross-coupling reaction. The best catalytic performance was obtained with the MOF that contained 8 wt % palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6 nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15 mol %). The material can be recycled at least 10 times without alteration of its catalytic properties.

Ruthenium Complexation in an Aluminium Metal–Organic Framework and Its Application in Alcohol Oxidation Catalysis

A ruthenium trichloride complex has been loaded into an aluminium metal-organic framework (MOF), MOF-253, by post-synthetic modification to give MOF-253-Ru. MOF-253 contains open bipyridine sites that are available to bind with the ruthenium complex. MOF-253-Ru was characterised by elemental analysis, N(2) sorption and X-ray powder diffraction. This is the first time that a Ru complex has been coordinated to a MOF through post-synthetic modification and used as a heterogeneous catalyst. MOF-253-Ru catalysed the oxidation of primary and secondary alcohols, including allylic alcohols, with PhI(OAc)(2) as the oxidant under very mild reaction conditions (ambient temperature to 40 °C). High conversions (up to >99%) were achieved in short reaction times (1-3 h) by using low catalyst loadings (0.5 mol% Ru). In addition, high selectivities (>90%) for aldehydes were obtained at room temperature. MOF-253-Ru can be recycled up to six times with only a moderate decrease in substrate conversion.

Catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides with α,β-unsaturated ketones

Alpha,beta-unsaturated ketones are no longer the missing dipolarophiles in catalytic asymmetric 1,3-dipolar cycloaddition of azomethine ylides. In the presence of Cu(I)-Fesulphos complexes as catalysts (5 mol %), these substrates combine high reactivity, wide substitution tolerance, moderate to good endo/exo selectivities, and high enantiocontrol. The endo/exo-diastereoselectivity of the reaction is strongly dependent on the cis or trans nature of the enone moiety.

Iridium-catalysed condensation of alcohols and amines as a method for aminosugar synthesis

Primary carbohydrate amines at primary and secondary carbons are alkylated by alcohols in the presence of [Cp*IrCl(2)](2). When primary carbohydrate alcohols are used as the coupling partners and in the presence of Cs(2)CO(3), amine-linked pseudodisaccharides are obtained. Secondary carbohydrate alcohols are unaffected under these conditions, which allows regioselective reactions.

Microporous Aluminoborates with Large Channels: Structural and Catalytic Properties

Channel zapping: PKU-1 and newly synthesized PKU-2 (Al(2)B(5)O(9)(OH)(3)⋅n H(2)O; see picture) possess microporous structures with 18-ring and 24-ring channels, respectively. They show high reactivity and size selectivity in the cyanosilylation of aldehydes as heterogeneous Lewis acid catalysts. The different channel sizes determine the substrate selectivity. These examples demonstrate the potential of octahedron-based aluminoborate channels in catalysis.

Intramolecular C−H Activation by Alkylpalladium(II) Complexes: Insights into the Mechanism of the Palladium‐Catalyzed Arylation Reaction

The cyclization of [ArOCH2PdL2Cl] complexes proceeds at room temperature in CH3CN in the presence of base, such as KOPh or carbonate, to form palladacycles. The effect of substituents on the aryl moiety (p-MeO > H >p-NO2) is as expected for an electrophilic aromatic substitution by electrophilic Pd(II). The absence of isotopic effect is also consistent with this proposal. Cyclopalladation proceeds with bidentate ligands (dppf, COD and phen); although the C-H activation reactions are slower in these cases. The starting [ArOCH2Pd(PPh3)2Cl] and [ArOCH2Pd(PPh3)Cl]2 complexes were prepared by transmetalation of organostannanes [(ArOCH2)4Sn] with [Pd(PPh3)2Cl2] or [Pd(PPh3)Cl2]2, respectively. Cleavage of palladacycles with HCl also gave [ArOCH2PdL2Cl] complexes.