Benedetta Pasquini

Quality by design in the chiral separation strategy for the determination of enantiomeric impurities: Development of a capillary electrophoresis method based on dual cyclodextrin systems for the analysis of levosulpiride

Quality by design (QbD) concepts, in accordance with International Conference on Harmonisation Pharmaceutical Development guideline Q8(R2), represent an innovative strategy for the development of analytical methods. In this paper QbD principles have been comprehensively applied in the set-up of a capillary electrophoresis method aimed to quantify enantiomeric impurities. The test compound was the chiral drug substance levosulpiride (S-SUL) and the developed method was intended to be used for routine analysis of the pharmaceutical product. The target of analytical QbD approach is to establish a design space (DS) of critical process parameters (CPPs) where the critical quality attributes (CQAs) of the method have been assured to fulfil the desired requirements with a selected probability. QbD can improve the understanding of the enantioseparation process, including both the electrophoretic behavior of enantiomers and their separation, therefore enabling its control. The CQAs were represented by enantioresolution and analysis time. The scouting phase made it possible to select a separation system made by sulfated-β-cyclodextrin and a neutral cyclodextrin, operating in reverse polarity mode. The type of neutral cyclodextrin was included among other CPPs, both instrumental and related to background electrolyte composition, which were evaluated in a screening phase by an asymmetric screening matrix. Response surface methodology was carried out by a Doehlert design and allowed the contour plots to be drawn, highlighting significant interactions between some of the CPPs. DS was defined by applying Monte-Carlo simulations, and corresponded to the following intervals: sulfated-β-cyclodextrin concentration, 9-12 mM; methyl-β-cyclodextrin concentration, 29-38 mM; Britton-Robinson buffer pH, 3.24-3.50; voltage, 12-14 kV. Robustness of the method was examined by a Plackett-Burman matrix and the obtained results, together with system repeatability data, led to define a method control strategy. The method was validated and was finally applied to determine the enantiomeric purity of S-SUL in pharmaceutical dosage forms.

Quality by Design approach in the development of a solvent-modified micellar electrokinetic chromatography method: finding the design space for the determination of amitriptyline and its impurities.

A solvent-modified micellar electrokinetic chromatography method was set up for the simultaneous determination of the tricyclic antidepressant amitriptyline (AMI) and its main impurities. The method was developed following Quality by Design (QbD) principles according to ICH Guideline Q8(R2). QbD approach made it possible to find the design space (DS), where quality was assured. After a scouting phase, aimed at selecting a suitable capillary electrophoresis pseudostationary phase, risk assessment tools were employed to define the critical process parameters (CPPs) to be considered in a screening phase (applied voltage, concentration and pH of the background electrolyte, concentration of the surfactant sodium dodecyl sulphate, of the cosurfactant n-butanol and of the organic modifiers acetonitrile and urea). The effects of the seven selected CPPs on critical quality attributes (CQAs), namely resolution values between critical peak pairs and analysis time, were investigated throughout the knowledge space by means of a symmetric screening matrix. Response surface study was then carried out on four selected CPPs by applying a Doehlert Design. Monte-Carlo simulations were performed in order to estimate the probability of meeting the desired specifications on CQAs, and thus to define the DS by means of a risk of failure map. Additional points at the edges of the DS were tested in order to verify the requirements for CQAs to be fulfilled. A control strategy was implemented by defining system suitability tests. The developed method was validated following ICH Guideline Q2(R1), including robustness assessment by Plackett-Burman design, and was applied to the analysis of real samples of amitriptyline coated tablets.

An integrated quality by design and mixture-process variable approach in the development of a capillary electrophoresis method for the analysis of almotriptan and its impurities

The development of a capillary electrophoresis (CE) method for the assay of almotriptan (ALM) and its main impurities using an integrated Quality by Design and mixture-process variable (MPV) approach is described. A scouting phase was initially carried out by evaluating different CE operative modes, including the addition of pseudostationary phases and additives to the background electrolyte, in order to approach the analytical target profile. This step made it possible to select normal polarity microemulsion electrokinetic chromatography (MEEKC) as operative mode, which allowed a good selectivity to be achieved in a low analysis time. On the basis of a general Ishikawa diagram for MEEKC methods, a screening asymmetric matrix was applied in order to screen the effects of the process variables (PVs) voltage, temperature, buffer concentration and buffer pH, on critical quality attributes (CQAs), represented by critical separation values and analysis time. A response surface study was then carried out considering all the critical process parameters, including both the PVs and the mixture components (MCs) of the microemulsion (borate buffer, n-heptane as oil, sodium dodecyl sulphate/n-butanol as surfactant/cosurfactant). The values of PVs and MCs were simultaneously changed in a MPV study, making it possible to find significant interaction effects. The design space (DS) was defined as the multidimensional combination of PVs and MCs where the probability for the different considered CQAs to be acceptable was higher than a quality level π=90%. DS was identified by risk of failure maps, which were drawn on the basis of Monte-Carlo simulations, and verification points spanning the design space were tested. Robustness testing of the method, performed by a D-optimal design, and system suitability criteria allowed a control strategy to be designed. The optimized method was validated following ICH Guideline Q2(R1) and was applied to a real sample of ALM coated tablets.

Mixture-process variable approach to optimize a microemulsion electrokinetic chromatography method for the quality control of a nutraceutical based on coenzyme Q10

In recent years, multivariate optimization has played an increasing role in analytical method development. ICH guidelines recommend using statistical design of experiments to identify the design space, in which multivariate combinations of composition variables and process variables have been demonstrated to provide quality results. Considering a microemulsion electrokinetic chromatography method (MEEKC), the performance of the electrophoretic run depends on the proportions of mixture components (MCs) of the microemulsion and on the values of process variables (PVs). In the present work, for the first time in the literature, a mixture-process variable (MPV) approach was applied to optimize a MEEKC method for the analysis of coenzyme Q10 (Q10), ascorbic acid (AA), and folic acid (FA) contained in nutraceuticals. The MCs (buffer, surfactant-cosurfactant, oil) and the PVs (voltage, buffer concentration, buffer pH) were simultaneously changed according to a MPV experimental design. A 62-run MPV design was generated using the I-optimality criterion, assuming a 46-term MPV model allowing for special-cubic blending of the MCs, quadratic effects of the PVs, and some MC-PV interactions. The obtained data were used to develop MPV models that express the performance of an electrophoretic run (measured as peak efficiencies of Q10, AA, and FA) in terms of the MCs and PVs. Contour and perturbation plots were drawn for each of the responses. Finally, the MPV models and criteria for the peak efficiencies were used to develop the design space and an optimal subregion (i.e., the settings of the mixture MCs and PVs that satisfy the respective criteria), as well as a unique optimal combination of MCs and PVs.

Microemulsion electrokinetic chromatography: An application for the simultaneous determination of suspected fragrance allergens in rinse-off products

A mixture of 18 neutral UV-active compounds with different characteristics of polarity was determined by capillary electrophoresis using a pseudostationary phase constituted by a microemulsion. The test analytes were volatile fragrance compounds, included in a list of 24 chemicals classified as suspected allergens according to Directive 2003/15/CE. The considered compounds were detected at 195 nm and p-anisaldehyde was chosen as internal standard. The background electrolyte consisted of a standard microemulsion made of 90.95% 10mM borax buffer, pH 9.2, 1.05% n-heptane, 8.00% SDS/n-butanol in 1:2 ratio, to which 40 mM methyl-β-cyclodextrin was added. Temperature and voltage were set at 20 °C and 25 kV, respectively. These experimental conditions allowed separation of the compounds to be obtained in about 20 min. The method was applied to real samples made up of rinse-off scented products. The results obtained using the standard microemulsion as pseudostationary phase showed its high resolution power, capable of effectively separating a complex mixture of analytes. Microemulsion electrokinetic chromatography was confirmed to have a great potential for different analytical challenges, holding up the possibility of using this technique as a good and complementary alternative to HPLC methods for routine analysis.

Development of a capillary electrophoresis method for the assay of ramipril and its impurities: An issue of cis–trans isomerization

The development of a rapid and selective capillary electrophoresis method for the quantitation of ramipril and its eight main impurities in pharmaceutical dosage form is described. Ramipril and three of its impurities contain a proline-similar moiety which causes in solution the presence of interconverting cis-trans isomers with respect to the amide bond. The interplay between electrophoretic migration and isomerization may yield the presence of an undesired interconversion zone between the two isomer peaks in the electropherogram, depending on the experimental conditions. Different capillary electrophoresis operative modes and pseudostationary phases were evaluated, both in normal and reverse polarity, in order to find the essential analytical parameters which could make it possible to overcome this issue and thus accurately quantify the analytes. The best results were obtained by using microemulsion electrokinetic chromatography in reverse polarity, where all the compounds which undergo cis-trans interconversion migrate as a single narrow peak. Experimental design led to identification of the following optimised conditions: background electrolyte, microemulsion made by 88.95% of 90 mM phosphate pH 2.5, 1.05% of n-heptane and 10.00% of SDS/n-butanol in 1:2 ratio; voltage, -26 kV; temperature, 17°C. Applying these conditions, the baseline separation of the analytes was obtained in about 10 min. Validation of the method following ICH guidelines was carried out and the procedure was applied to a real sample of ramipril tablets.

Combination of capillary electrophoresis, molecular modeling and NMR to study the enantioselective complexation of sulpiride with double cyclodextrin systems.

The enantioselective complexation of sulpiride by a number of cyclodextrins (CDs) was deeply investigated by different techniques with the aim of evaluating the role of the used chiral selectors involved in the enantioseparation of the eutomer levosulpiride (S-SUL) and its dextro-isomer by capillary electrophoresis (CE). A CE method was previously developed with the aim of determining the optical purity of S-SUL and was based on the use of a dual cyclodextrin system, made by sulfated-β-cyclodextrin (SβCD) and methyl-β-cyclodextrin (MβCD). In this paper, a molecular modeling study made it possible to explain the different affinity of sulpiride enantiomers for several CDs, which had been tested during the early phase of CE method development. The potential and the gain energy of the inclusion complexes between the enantiomers and neutral and charged CDs were calculated on the minimized conformations. The calculated docking energies indicated that the most stable complexes were effectively obtained with SβCD and MβCD. A correlation between CE migration time of the last migrating enantiomer S-SUL and the stability of analyte-neutral CDs complexes was postulated. Furthermore, two-dimensional rotating-frame Overhauser effect spectroscopy NMR (2-D ROESY) experiments were carried out, which clearly indicated the formation of complexes and suggested the inclusion of the benzene sulfonamide moiety of S-SUL inside the hydrophobic cavity of the CDs.

Analytical quality by design in the development of a cyclodextrin‐modified capillary electrophoresis method for the assay of metformin and its related substances

Quality by Design (QbD) is a new paradigm of quality to be applied to pharmaceutical products and processes, recently encouraged by International Conference on Harmonisation guidelines. In this paper QbD approach was applied to the development of a CE method for the simultaneous assay of metformin hydrochloride (MET) and its main impurities. QbD strategy was focused on electrophoretic process understanding, and the analytical method was thoroughly evaluated by applying risk assessment and chemometric tools. Method scouting allowed CD‐CZE based on the addition of carboxymethyl‐β‐CD to Britton‐Robinson acidic buffer to be chosen as operative mode. Seven critical process parameters (CPPs) were selected, related to capillary, injection, BGE and instrumental settings. The effect of the different levels of the CPPs on critical quality attributes (CQAs), e.g. critical resolution values and analysis time, was evaluated in a screening study. Response surface methodology led to draw contour plots and sweet spot plots. The definition of design space was accomplished by applying Monte‐Carlo simulations, thus identifying by risk of failure maps a multivariate zone where the CQAs fulfilled the requirements with a selected probability. Finally, a control strategy was designed and the method was applied to a real sample of MET tablets.

Cyclodextrin- and solvent-modified micellar electrokinetic chromatography for the determination of captopril, hydrochlorothiazide and their impurities: A Quality by Design approach.

A fast and selective capillary electrophoresis method has been developed for the simultaneous determination of the antihypertensive drugs captopril and hydrochlorothiazide and their related impurities in a combined dosage form. Method development was carried out implementing each step of Quality by Design workflow, the new paradigm of quality outlined in International Conference on Harmonisation Guidelines. Captopril is characterized by the lack of a strong chromophore and contains a proline-similar moiety, which gives rise to the presence of interconverting cis-trans isomers and leads to the possible interference between electrophoretic migration and reaction of isomerization. The scouting phase was dedicated to the investigation of several operative modes in order to overcome detection and isomerization issues. The best performances were obtained with sodium cholate-based micellar electrokinetic chromatography with the addition of n-butanol and γ-cyclodextrin. Critical quality attributes were represented by the critical resolution values and by analysis time. Critical process parameters were defined as temperature, voltage, concentration and pH of borate buffer, concentration of sodium cholate, n-butanol and γ-cyclodextrin. Screening experimental design was applied for investigating knowledge space. Response surface methodology pointed out several significant interaction effects, and with Monte-Carlo simulations led to map out the design space at a selected probability level. Robustness testing was carried out and a control strategy based on system suitability tests was defined. The selected working conditions gave a complete separation of the analytes in less than three minutes. The method was validated and applied to the analysis of a real sample of coformulation tablets.

Enantioseparation and impurity determination of ambrisentan using cyclodextrin-modified micellar electrokinetic chromatography: Visualizing the design space within quality by design framework

A capillary electrophoresis method for the simultaneous determination of the enantiomeric purity and of impurities of the chiral drug ambrisentan has been developed following the Quality by Design principles. The selected separation system consisted of a micellar pseudostationary phase made by sodium dodecyl sulphate with the addition of γ-cyclodextrin. The effects of critical process parameters (capillary length, temperature, voltage, borate concentration, pH, sodium dodecyl sulphate concentration, γ-cyclodextrin concentration) on enantioresolution of ambrisentan and analysis time were extensively investigated by multivariate strategies involving a screening phase and Response Surface Methodology. The Design Space was defined with a desired probability level π≥90%, and the working conditions, with the limits of the Design Space, corresponded to the following: capillary length, 64.5cm; temperature, 22°C; voltage, 30kV (26-30kV); background electrolyte, 100mM borate buffer pH 9.20 (8.80-9.60), 100mM sodium dodecyl sulphate, 50mM (43-50mM) γ-cyclodextrin. A Plackett-Burman design was applied for robustness testing, and a method control strategy was established. The method was fully validated according to the International Conference on Harmonisation guidelines and was applied to ambrisentan coated tablets.