Serena Orlandini

QuEChERS sample preparation for the determination of pesticides and other organic residues in environmental matrices: a critical review

Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) is an extraction and clean-up technique originally developed for recovering pesticide residues from fruits and vegetables. Since its introduction, and until December 2013, about 700 papers have been published using the QuEChERS technique, according to a literature overview carried out using SciFinder, Elsevier SciVerse, and Google search engines. Most of these papers were dedicated to pesticide multiresidue analysis in food matrices, and this topic has been thoroughly reviewed over recent years. The QuEChERS approach is now rapidly developing beyond its original field of application to analytes other than pesticides, and matrices other than food, such as biological fluids and non-edible plants, including Chinese medicinal plants. Recently, the QuEChERS concept has spread to environmental applications by analyzing not only pesticides but also other compounds of environmental concern in soil, sediments, and water. To the best of our knowledge, QuEChERS environmental applications have not been reviewed so far; therefore, in this contribution, after a general discussion on the evolution and changes of the original QuEChERS method, a critical survey of the literature regarding environmental applications of conventional and modified QuEChERS methodology is provided. The overall recoveries obtained with QuEChERS and other extraction approaches (e.g., accelerated solvent extraction, ultrasonic solvent extraction, liquid/solid extraction, and soxhlet extraction) were compared, providing evidence for QuEChERS higher recoveries for various classes of compounds, such as biopesticides, chloroalkanes, phenols, and perfluoroalkyl substances. The role of physicochemical properties of soil (i.e., clay and organic carbon content, as well as cation exchange capacity) and target analytes (i.e., log KOW, water solubility, and vapor pressure) were also evaluated in order to interpret recovery and matrix effect data.

Application of quality by design to the development of analytical separation methods.

AbstractRecent pharmaceutical regulatory documents have stressed the critical importance of applying quality by design (QbD) principles for in-depth process understanding to ensure that product quality is built in by design. This article outlines the application of QbD concepts to the development of analytical separation methods, for example chromatography and capillary electrophoresis. QbD tools, for example risk assessment and design of experiments, enable enhanced quality to be integrated into the analytical method, enabling earlier understanding and identification of variables affecting method performance. A QbD guide is described, from identification of quality target product profile to definition of control strategy, emphasizing the main differences from the traditional quality by testing (QbT) approach. The different ways several authors have treated single QbD steps of method development are reviewed and compared. In a final section on outlook, attention is focused on general issues which have arisen from the surveyed literature, and on the need to change the researcher’s mindset from the QbT to QbD approach as an important analytical trend for the near future. FigureQuality by design guide for analytical method development

Identification and determination of mainstream and sidestream smoke components in different brands and types of cigarettes by means of solid-phase microextraction-gas chromatography-mass spectrometry

The qualitative and quantitative determination of components of mainstream and sidestream smoke has been performed by solid-phase microextraction-gas chromatography-mass spectrometry. Several brands and types of cigarettes sold in Italy were considered: normal, mild, light, extra light, some with filter and some without. Extraction of the analytes was performed by means of solid-phase microextraction (SPME) and the optimisation of the extraction procedure was performed by experimental design, taking into consideration type of fiber polymer, exposure temperature and time. Sixty-seven components of mainstream and sidestream smoke were identified. The quantified compounds (by means of deuterium-labelled isotopologues) were benzene, toluene, p-xylene, m-xylene, pyridine, o-xylene, limonene, naphthalene, phenol and nicotine. Finally, a comparison between the chemical profile of smoke from the different cigarettes was made.

Multivariate optimization of capillary electrophoresis methods: a critical review.

In this article a review on the recent applications of multivariate techniques for optimization of electromigration methods, is presented. Papers published in the period from August 2007 to February 2013, have been taken into consideration. Upon a brief description of each of the involved CE operative modes, the characteristics of the chemometric strategies (type of design, factors and responses) applied to face a number of analytical challenges, are presented. Finally, a critical discussion, giving some practical advices and pointing out the most common issues involved in multivariate set-up of CE methods, is provided.

Recent advances in chiral separation of amino acids using capillary electromigration techniques.

This review highlights recent progresses in the chiral recognition and separation of amino acid enantiomers obtained by capillary electromigration techniques, using different chiral selectors and especially cyclodextrins, covering the literature published from January 2010 to March 2014. Sections are dedicated to the use of derivatization reagents and to the possibility to enantioseparate underivatized amino acids by using either ligand exchange capillary electrophoresis (LECE) and capillary electrophoresis (CE) coupled on line with mass spectrometry. A short insight on frontier nanomaterials is also given.

Quality by design in the chiral separation strategy for the determination of enantiomeric impurities: Development of a capillary electrophoresis method based on dual cyclodextrin systems for the analysis of levosulpiride

Quality by design (QbD) concepts, in accordance with International Conference on Harmonisation Pharmaceutical Development guideline Q8(R2), represent an innovative strategy for the development of analytical methods. In this paper QbD principles have been comprehensively applied in the set-up of a capillary electrophoresis method aimed to quantify enantiomeric impurities. The test compound was the chiral drug substance levosulpiride (S-SUL) and the developed method was intended to be used for routine analysis of the pharmaceutical product. The target of analytical QbD approach is to establish a design space (DS) of critical process parameters (CPPs) where the critical quality attributes (CQAs) of the method have been assured to fulfil the desired requirements with a selected probability. QbD can improve the understanding of the enantioseparation process, including both the electrophoretic behavior of enantiomers and their separation, therefore enabling its control. The CQAs were represented by enantioresolution and analysis time. The scouting phase made it possible to select a separation system made by sulfated-β-cyclodextrin and a neutral cyclodextrin, operating in reverse polarity mode. The type of neutral cyclodextrin was included among other CPPs, both instrumental and related to background electrolyte composition, which were evaluated in a screening phase by an asymmetric screening matrix. Response surface methodology was carried out by a Doehlert design and allowed the contour plots to be drawn, highlighting significant interactions between some of the CPPs. DS was defined by applying Monte-Carlo simulations, and corresponded to the following intervals: sulfated-β-cyclodextrin concentration, 9-12 mM; methyl-β-cyclodextrin concentration, 29-38 mM; Britton-Robinson buffer pH, 3.24-3.50; voltage, 12-14 kV. Robustness of the method was examined by a Plackett-Burman matrix and the obtained results, together with system repeatability data, led to define a method control strategy. The method was validated and was finally applied to determine the enantiomeric purity of S-SUL in pharmaceutical dosage forms.

Quinoline alkaloids in honey: Further analytical (HPLC-DAD-ESI-MS, multidimensional diffusion-ordered NMR spectroscopy), theoretical and chemometric studies

The wound-healing properties of honey are well established and it has been suggested that, among its pharmaco-active constituents, kynurenic acid (KA) exerts antinociceptive action on injured tissue by antagonizing NMDA at peripheral GABA receptors. The aim of this study was to investigate the quantitative profile of KA and of two recently identified, structurally related derivatives, 3-pyrrolidinyl-kynurenic acid (3-PKA) and its gamma-lactamic derivative (gamma-LACT-3-PKA), by examining their mass spectrometric behavior, in honeys from different botanical sources. We used a combination of HPLC-DAD-ESI-MS and NMR techniques (one-dimensional (1)H NMR and diffusion-ordered spectroscopy NMR). Chestnut honey constantly contained KA (2114.9-23 g/kg), 3-PKA (482.8-80 mg/kg) and gamma-LACT-3-PKA (845.8-32 mg/kg), confirming their reliability as markers of origin. A new metabolite, 4-quinolone (4-QUIN), was identified for the first time in one chestnut honey sample (743.4 mg/kg). Small amounts of KA were found in honeydew, sunflower, multifloral, almond and eucalyptus honeys, in the range of 23.1-143 mg/kg, suggesting contamination with chestnut honey. Total phenol content (TPC) was in the range from 194.9 to 1636.3 mg(GAE)/kg and total antiradical activity (TAA) from 61 to 940 mg/(GAE)/kg), depending on the botanical origin. Principal component analysis (PCA) was then done on these data. The three different clusters depicted: (i) antinociceptive activity from KA and/or its derivatives, typical of chestnut honey; (ii) antioxidant/radical scavenging activity by antioxidants responsible for the antiinflammatory action (dark honeys); (iii) peroxide-dependent antibacterial activity due to H(2)O(2) production by glucose oxidase in honey. The PCA findings provide useful indications for the dermatologist for the treatment of topical diseases, and the profiling of KA and its derivatives may shed light on new aspects of the kynurenine pathway involved in tryptophan metabolism.

Quality by Design approach in the development of a solvent-modified micellar electrokinetic chromatography method: finding the design space for the determination of amitriptyline and its impurities.

A solvent-modified micellar electrokinetic chromatography method was set up for the simultaneous determination of the tricyclic antidepressant amitriptyline (AMI) and its main impurities. The method was developed following Quality by Design (QbD) principles according to ICH Guideline Q8(R2). QbD approach made it possible to find the design space (DS), where quality was assured. After a scouting phase, aimed at selecting a suitable capillary electrophoresis pseudostationary phase, risk assessment tools were employed to define the critical process parameters (CPPs) to be considered in a screening phase (applied voltage, concentration and pH of the background electrolyte, concentration of the surfactant sodium dodecyl sulphate, of the cosurfactant n-butanol and of the organic modifiers acetonitrile and urea). The effects of the seven selected CPPs on critical quality attributes (CQAs), namely resolution values between critical peak pairs and analysis time, were investigated throughout the knowledge space by means of a symmetric screening matrix. Response surface study was then carried out on four selected CPPs by applying a Doehlert Design. Monte-Carlo simulations were performed in order to estimate the probability of meeting the desired specifications on CQAs, and thus to define the DS by means of a risk of failure map. Additional points at the edges of the DS were tested in order to verify the requirements for CQAs to be fulfilled. A control strategy was implemented by defining system suitability tests. The developed method was validated following ICH Guideline Q2(R1), including robustness assessment by Plackett-Burman design, and was applied to the analysis of real samples of amitriptyline coated tablets.

Cyclodextrin-MEEKC for the analysis of oxybutynin and its impurities

The development of a cyclodextrin-MEEKC method for the analysis of oxybutynin and five related impurities is described. Experimental design strategies were applied in order to reach baseline separation of the compounds in a short analysis time. Mixture design made it possible to find the best composition for the microemulsion acting as pseudostationary phase, which was constituted by 89.1% 10 mM borate buffer pH 9.2, 1.7% n-heptane, 9.2% SDS/n-butanol in 1:2 ratio. The addition of (2-hydroxypropyl)-beta-cyclodextrin to the background electrolyte was found to improve analysis performance. A Doehlert design, for the factors cyclodextrin concentration and voltage, was carried out and Derringer desirability function led to the identification of 18 mM and 29 kV as the optimal values. Applying the optimum conditions, separation of all the compounds, including the enantiomers of impurity 1, was obtained in less than 12 min. The method was validated according to ICH guidelines for drug assay and determination of impurities and was applied to oxybutynin tablet analysis.

An integrated quality by design and mixture-process variable approach in the development of a capillary electrophoresis method for the analysis of almotriptan and its impurities

The development of a capillary electrophoresis (CE) method for the assay of almotriptan (ALM) and its main impurities using an integrated Quality by Design and mixture-process variable (MPV) approach is described. A scouting phase was initially carried out by evaluating different CE operative modes, including the addition of pseudostationary phases and additives to the background electrolyte, in order to approach the analytical target profile. This step made it possible to select normal polarity microemulsion electrokinetic chromatography (MEEKC) as operative mode, which allowed a good selectivity to be achieved in a low analysis time. On the basis of a general Ishikawa diagram for MEEKC methods, a screening asymmetric matrix was applied in order to screen the effects of the process variables (PVs) voltage, temperature, buffer concentration and buffer pH, on critical quality attributes (CQAs), represented by critical separation values and analysis time. A response surface study was then carried out considering all the critical process parameters, including both the PVs and the mixture components (MCs) of the microemulsion (borate buffer, n-heptane as oil, sodium dodecyl sulphate/n-butanol as surfactant/cosurfactant). The values of PVs and MCs were simultaneously changed in a MPV study, making it possible to find significant interaction effects. The design space (DS) was defined as the multidimensional combination of PVs and MCs where the probability for the different considered CQAs to be acceptable was higher than a quality level π=90%. DS was identified by risk of failure maps, which were drawn on the basis of Monte-Carlo simulations, and verification points spanning the design space were tested. Robustness testing of the method, performed by a D-optimal design, and system suitability criteria allowed a control strategy to be designed. The optimized method was validated following ICH Guideline Q2(R1) and was applied to a real sample of ALM coated tablets.