Berkan Celikten

Micro-CT assessment of the sealing ability of three root canal filling techniques.

This study used micro-CT to compare three obturation techniques with respect to void occurrence in canals filled with bioceramic sealer. Thirty extracted first mandibular premolars were prepared with a ProTaper Universal system and randomly allocated to three groups. Canals were obturated with gutta-percha and bioceramic root canal sealer, using either single-cone, lateral compaction, or Thermafil filling technique. Each tooth was then scanned with micro-CT. Voids in 2D cross-sectional images and void volumes in 3D images of all root thirds were assessed in relation to obturation technique. There was no significant difference between obturation techniques in the proportion of sections with voids (P > 0.05). However, the results of the obturation techniques significantly differed in relation to root region (P < 0.05). In conclusion, no root filling technique resulted in void-free specimens. Void volumes were highest for the single-cone technique and lowest for Thermafil, in all regions (P < 0.05).

Evaluation of root canal sealer filling quality using a single-cone technique in oval shaped canals: An In vitro Micro-CT study

The aim of this study was to evaluate and compare the presence of voids in oval root canals filled with different root canal sealers (EndoSequence BC Sealer, Smartpaste bio, ActiV GP) and to compare those with root canals filled with AH Plus sealer using micro-CT. In total, 40 freshly extracted human single-root maxillary premolars were used. Specimens instrumented with the EndoSequence NiTi rotary instrument were assigned randomly into four groups. In each group, root canals were filled with single-cone gutta-percha and one of the tested sealers. Each specimen was then scanned using micro-CT at a voxel resolution of 13.47 μm. Proportions of sections with voids in cross-sectional images and void volumes for each sealer were calculated in the apical, middle, and coronal thirds. Differences according to root canal sealers were evaluated statistically using the Kruskal-Wallis test and the Mann-Whitney U-test at a significance level of 5%. The analysis showed a decrease in void formation in the apical third, with a significant difference between the apical and coronal thirds among bioceramic sealers, ActiV GP, and AH Plus (p < 0.05) but no significant difference between the apical and middle thirds or between the middle and coronal thirds was found for the sealers tested (p > 0.05). All root canal sealers tested resulted in voids. The bioceramic sealers (EndoSequence BC Sealer, Smartpaste bio) produced similar voids which had the fewest in the apical third of root canals among the sealers tested which can be related due to root canal anatomy variations.

Multidisciplinary Approach for the Treatment of Horizontal Root-Fractured Maxillary Anterior Teeth

Dental trauma can lead to a wide range of injuries of which crown and root fractures are examples. Crown-root fractures often need complex treatment planning. This case report describes the use of MTA in the multidisciplinary management of a patient with a horizontally fractured central incisor and luxation in a different central incisor. A 42-year-old female patient presented within 1 h of receiving direct trauma to her maxillary area. Clinical examination revealed that the right and left maxillary central incisors presented mobility and sensitivity to percussion and palpation but no sensitivity to thermal stimulations. Occlusal displacement with extrusion in the left maxillary central incisor and luxation in the right maxillary central incisor was observed. Radiographic examination revealed horizontal root fracture at the apical third of the left maxillary central incisor. Root fracture in the right maxillary incisor was not observed. Endodontic and aesthetic restorative treatments were completed. MTA showed a good long-term outcome when used in root-fractured and luxated teeth. In addition, composite resin restoration provided satisfactory aesthetic results even after 15 months.

Resistance to Fracture of Dental Roots Obturated with Different Materials

The aim of this study was to compare the vertical fracture resistance of roots obturated with different root canal filling materials and sealers. Crowns of 55 extracted mandibular premolar teeth were removed to provide root lengths of 13 mm. Five roots were saved as negative control group (canals unprepared and unfilled). Fifty root canals were instrumented and then five roots were saved as positive control group (canals prepared but unfilled). The remaining 45 roots were randomly divided into three experimental groups (n = 15 root/group) and obturated with the following procedures: in group 1, glass ionomer-based sealer and cone (ActiV GP obturation system); in group 2, bioceramic sealer and cone (EndoSequence BC obturation system); and in group 3, roots were filled with bioceramic sealer and cone (Smartpaste bio obturation system). All specimens were tested in a universal testing machine for measuring fracture resistance. For each root, the force at the time of fracture was recorded in Newtons. The statistical analysis was performed by using Kruskal-Wallis and post hoc test. There were no significant differences between the three experimental groups. The fracture values of three experimental and negative control groups were significantly higher than the positive control group. Within the limitations of this study, all materials increased the fracture resistance of instrumented roots.

Cone-beam CT evaluation of root canal morphology of maxillary and mandibular premolars in a Turkish Cypriot population

Objectives:Because of economic and political issues, Turkish Cypriots have been emigrating from Cyprus since the 1920s, especially to the United Kingdom, other European countries and Australia. Recently, according to the UK House of Commons, Home Affairs Committee, ~300,000 Cypriot Turks were living in the United Kingdom. However, this ethnic population residing in the United Kingdom has been insufficiently analysed. Although many Turkish Cypriots have been living abroad, little is known about the dental characteristics of this group. Premolar teeth, especially maxillary premolars, pose great challenges in endodontic treatment because of the number of roots and canals, and the variation in the configurations of the pulp cavity. Thus, it was considered valuable to determine the morphological characteristic of premolar teeth in a Turkish Cypriot population to aid clinicians in performing endodontic treatment in this ethnic population.Materials and Methods:The sample for this cross-sectional study consisted of a retrospective evaluation of cone-beam CT scans of 263 adult patients (age range 16–80 years). The number of roots and their morphology, the number of canals per root and the canal configuration were examined. The root canal configurations were also classified according to the scheme of Vertucci in the maxillary and mandibular premolar teeth. Pearson’s χ2-test was performed among canal configurations, sides and gender (P⩽0.05).Results:In the present study, most root canal configurations were type IV (76.8%) and type I (49.4%) in the maxillary first and second premolars, respectively, whereas most root canal configurations were type I (93%) in both mandibular first and second premolars. In total, four (0.9%) teeth in the maxillary first premolars and two (0.4%) teeth in the maxillary second molar premolars had three roots.Conclusions:This is the first population-based study to focus solely on Turkish Cypriots’ root canal anatomy. Our findings will be valuable for dental professionals who treat many Turkish Cypriot patients, in the United Kingdom, Australia and other countries.

Fluid flow evaluation of coronal microleakage intraorifice barrier materials in endodontically treated teeth

Objective: The objective of this study was to compare the coronal microleakage intraorifice barrier materials, called CoroSeal (CS), fissur sealant (FS), flowable composite FC, and policarboksilate cement (PC), by using the computerized fluid filtration method. Materials and Methods: Fifty freshly extracted, single-canal human maxillary central teeth were used in this study. The teeth were decoronated to a standardized root length of 15 mm. After preparation and irrigation, all the teeth were obturated with gutta-percha and AH-Plus. In all teeth, the coronal 2 mm of root filling was removed and replaced with one of the intraorifice barriers. According to intraorifice barriers, teeth were divided randomly into 4 experimental groups (n = 10) and 2 control groups (n = 5). Group 1: CS; Group 2: FS; Group 3: FC; and Group 4: PC. Positive Control Group: No barrier material was used. Negative Control Group: Roots were completely coated with the nail polish, including the orifice. Leakage was evaluated by using a computerized fluid filtration model. Differences in fluid filtration among groups were subjected to statistical analysis using the Kruskal-Wallis Test and multiple comparisons test. Results: A value of P < 0.05 was statistically significant. Statistical analysis has indicated that the CS leaked significantly less than other groups (P < 0.05). There was a significant difference between FS and PC (P < 0.05), in contrast there was no significant difference between FS and FC (P > 0.05). Conclusions: Using the CS material as an intraorrifice barrier material reduced amount of microleakage as compared with FS, FC, and PC.

Evaluation of the sealing ability of different root canal sealers: a combined SEM and micro-CT study

Abstract Objective The purpose of this study was to analyze the ability of multiple compounds to seal the dental tubules using scanning electron microscopy (SEM) and micro-computed tomogra-phy (micro-CT). Material and Methods Twenty-four single-root human mandibular premolars were selected and instrumented with nickel-titanium rotary file and the final file size was #40/06. They were then randomly allocated into 2 groups, and all samples were filled with single cone gutta-percha (#40/06) and one of the tested sealers (AH Plus and EndoSequence BC sealers). All specimens were scanned using micro-CT and then three from each group were randomly selected for SEM analysis. Results According to SEM, both root canal sealers showed sufficient adaptation to dentin along the whole length of the root canal, though the coronal sections presented superior sealing than the apical sections. Micro porosity analyses revealed that the volume of closed pores and the surface of closed pores had the largest values in the coronal sections, followed by the middle and the apical sections for both sealants (p<0.05). However, no significant difference was observed for those two parameters between AH Plus and EndoSequence BC sealers in any of the three sections (p>0.05), whereas they were larger in the apical section when the AH Plus sealer was used. Conclusions By using the single cone technique, neither EndoSequence or AH Plus pro-vides a porosity-free root canal filling. The EndoSequence BC sealer may have similar sealing abilities regarding the whole root canal as the AH Plus sealer. A better sealing effect could be obtained in the coronal and middle sections of a root canal than the apical part by using the tested sealers.

Micro-CT and nano-CT analysis of filling quality of three different endodontic sealers

OBJECTIVES To investigate voids in different root canal sealers using micro-CT and nano-CT, and to explore the feasibility of using nano-CT for quantitative analysis of sealer filling quality. METHODS 30 extracted mandibular central incisors were randomly assigned into three groups according to the applied root canal sealers (Total BC Sealer, Sure Seal Root, AH Plus) by the single cone technique. Subsequently, micro-CT and nano-CT were performed to analyse the incidence rate of voids, void fraction, void volume and their distribution in each sample. RESULTS Micro-CT evaluation showed no significant difference among sealers for the incidence rate of voids or void fraction in the whole filling materials (p > 0.05), whereas a significant difference was found between AH Plus and the other two sealers using nano-CT (p < 0.05). All three sealers presented less void volume in the apical third; however, higher void volumes were observed in the apical and coronal thirds in AH Plus using micro-CT (p < 0.05), while nano-CT results displayed higher void volume in AH Plus among all the sealers and regions (p < 0.05). CONCLUSIONS Bioactive sealers showed higher root filling rate, lower incidence rate of voids, void fraction and void volume than AH Plus under nano-CT analysis, when round root canals were treated by the single cone technique. The disparate results suggest that the higher resolution of nano-CT have a greater ability of distinguishing internal porosity, and therefore suggesting the potential use of nano-CT in quantitative analysis of filling quality of sealers.

Endodontic management of taurodontism with a complex root canal anatomy in mandibular posterior teeth

One of the biggest challenges in endodontic treatment is to comprehensively understand the variation of tooth root canal anatomy. To a large degree, the anatomy and furcation distribution of teeth, which vary from nationality and ethnic groups, will influence the clinical diagnosis, treatment plan and even prognosis. Taurodontism, as one of anatomic variation in tooth structures, is relatively hard to be seen in dental clinics. Two special cases of taurodontism with varied root canal anatomies in mandibular second premolar and first molar are reported in this paper.

Cone beam computed tomography evaluation of maxillary molar root canal morphology in a Turkish Cypriot population

ABSTRACT The aim of this retrospective study was to review, analyse and characterize the root canal morphology of maxillary molars, using cone beam computed tomography (CBCT), in a group of the Turkish Cypriot population. The sample for this cross-sectional study consisted of retrospective evaluation of CBCT scans of 290 adult patients (age range 16–80). The number of roots and their morphology, the number of canals per tooth and the root canal configurations were also classified according to the method of Vertucci. Pearsons chi-square test was performed for canal configurations, sides and gender (p < 0.05). Among the 373 first molars, there was no single-rooted specimen, 2 (0.53%) teeth had 2 roots, 365 (97.8%) teeth had 3 roots and 6 ones (1.6%) had 4 roots. Among the 438 second molars, 14 (3.1%) were single-rooted, 26 (5.9%) teeth had 2 roots, 392 (89.4%) teeth had 3 roots and 6 teeth (1.3%) had 4 roots. No sex difference was found in the frequency of additional canals both in the maxillary first and second molars. Occurrence of additional canals did not differ with age. These results provide detailed knowledge of the root canal anatomy of the maxillary molar teeth in this particular population, which is of clinical importance for dental professionals when performing endodontic treatment.