Bert Geerdink

Properties of protective oxide scales containing cerium on Incoloy 800H in oxidizing and sulfidizing environments. I. Constant-extension-rate study of mechanical properties

The mechanical properties of ceramic coatings containing cerium oxide, prepared by the sol-gel method and used to protect Incoloy 800H against aggressive environments, are reported. Deformation and cracking behavior in oxidizing and sulfidizing environments has been investigated by constant-extension-rate tests. Extension rates were between 9.3×10−6 and 3.7×10−7 sec−1 at 823 <T<973 K. Under these conditions, cerium oxide sol-gel-coated specimens do not show any failure at extensions of 1.0% or more, but in hydrogen, sulfide failure is found at lower extensions than in air.

The properties of protective oxide scales containing cerium on alloy 800H in oxidizing and oxidizing/sulphidizing environments

The corrosion protection of oxide scales formed by electrophoretic deposition in a cerium-containing sol on Alloy 800H, a 32Ni-20Cr steel, followed by firing in air at 1123 K was studied in oxidizing and mixed oxidizing/sulphidizing environments at elevated temperatures. In particular, the influence of type of sol solvent, sol concentration, and thickness of deposited layer on the protection were studied. An optimized treatment was deduced which led to a significant improvement in corrosion behavior in oxidizing/sulphidizing environments.

The corrosion and mechanical behaviours of Al, FeCrAlY, and CoCrAlY coatings in aggressive environments

The mechanical and chemical behaviours of aluminide coatings applied by pack cementation, FeCrAlY coatings applied by plasma spraying and CoCrAlY coatings applied by electrodeposition were studied. The coatings were pretreated for 0.5 h in argon at 1373 K to improve the adhesion and structural homogeneity via diffusion of the elements into the substrate to some extent. In particular, the influence of the temperature on their protective behaviours was studied. Corrosion studies have been carried out between 823 and 1123 K in oxidizing-sulphidizing environments.