Bjørn-Ove Fimland

Vertically Aligned GaAs Nanowires on Graphite and Few-Layer Graphene: Generic Model and Epitaxial Growth

By utilizing the reduced contact area of nanowires, we show that epitaxial growth of a broad range of semiconductors on graphene can in principle be achieved. A generic atomic model is presented which describes the epitaxial growth configurations applicable to all conventional semiconductor materials. The model is experimentally verified by demonstrating the growth of vertically aligned GaAs nanowires on graphite and few-layer graphene by the self-catalyzed vapor-liquid-solid technique using molecular beam epitaxy. A two-temperature growth strategy was used to increase the nanowire density. Due to the self-catalyzed growth technique used, the nanowires were found to have a regular hexagonal cross-sectional shape, and are uniform in length and diameter. Electron microscopy studies reveal an epitaxial relationship of the grown nanowires with the underlying graphitic substrates. Two relative orientations of the nanowire side-facets were observed, which is well explained by the proposed atomic model. A prototype of a single GaAs nanowire photodetector demonstrates a high-quality material. With GaAs being a model system, as well as a very useful material for various optoelectronic applications, we anticipate this particular GaAs nanowire/graphene hybrid to be promising for flexible and low-cost solar cells.

Observation of free exciton photoluminescence emission from single wurtzite GaAs nanowires

Microphotoluminescence measurements are used to investigate the optical properties of single wurtzite GaAs nanowires grown by molecular beam epitaxy. The wurtzite GaAs nanowires exhibit a photoluminescence emission peak at 1.544 eV, 29 meV higher than the zinc blende GaAs free exciton energy. Temperature dependent photoluminescence measurements (4.4–70 K) show indications of defect and impurity related emissions at lower energies (1.53–1.54 eV) and the presence of nonradiative defects. High resolution transmission electron microscopy images show a low density of short zinc blende segments sandwiched in between a dominating wurtzite structure and weak photoluminescence emission related to such zinc blende segments is also observed.

Growth and Characterization of Wurtzite GaAs Nanowires with Defect-Free Zinc Blende GaAsSb Inserts

We have demonstrated the growth of a unique wurtzite (WZ) GaAs nanowire (NW) with a zinc blende (ZB) GaAsSb insert by Au-assisted molecular beam epitaxy. An abrupt interface from the WZ GaAs phase to the ZB GaAsSb phase was observed, whereas an intermediate segment of a 4H polytype GaAs phase was found directly above the ZB GaAsSb insert. A possible mechanism for the different phase transitions is discussed. Furthermore, low temperature microphotoluminescence (micro-PL) measurements showed evidence of quantum confinement of holes in the GaAsSb insert.

Position-Controlled Uniform GaAs Nanowires on Silicon using Nanoimprint Lithography

We report on the epitaxial growth of large-area position-controlled self-catalyzed GaAs nanowires (NWs) directly on Si by molecular beam epitaxy (MBE). Nanohole patterns are defined in a SiO2 mask on 2 in. Si wafers using nanoimprint lithography (NIL) for the growth of positioned GaAs NWs. To optimize the yield of vertical NWs the MBE growth parameter space is tuned, including Ga predeposition time, Ga and As fluxes, growth temperature, and annealing treatment prior to NW growth. In addition, a non-negligible radial growth is observed with increasing growth time and is found to be independent of the As species (i.e., As2 or As4) and the growth temperatures studied. Cross-sectional transmission electron microscopy analysis of the GaAs NW/Si substrate heterointerface reveals an epitaxial growth where NW base fills the oxide hole opening and eventually extends over the oxide mask. These findings have important implications for NW-based device designs with axial and radial p-n junctions. Finally, NIL positioned GaAs/AlGaAs core-shell heterostructured NWs are grown on Si to study the optical properties of the NWs. Room-temperature photoluminescence spectroscopy of ensembles of as-grown core-shell NWs reveals uniform and high optical quality, as required for the subsequent device applications. The combination of NIL and MBE thereby demonstrates the successful heterogeneous integration of highly uniform GaAs NWs on Si, important for fabricating high throughput, large-area position-controlled NW arrays for various optoelectronic device applications.

A Story Told by a Single Nanowire: Optical Properties of Wurtzite GaAs

The optical properties of the wurtzite (WZ) GaAs crystal phase found in nanowires (NWs) are a highly controversial topic. Here, we study high-quality pure WZ GaAs/AlGaAs core-shell NWs grown by Au-assisted molecular beam epitaxy (MBE) with microphotoluminescence spectroscopy (μ-PL) and (scanning) transmission electron microscopy on the very same single wire. We determine the room temperature (294 K) WZ GaAs bandgap to be 1.444 eV, which is ∼20 meV larger than in zinc blende (ZB) GaAs, and show that the free exciton emission at 15 K is at 1.516 eV. On the basis of time- and temperature-resolved μ-PL results, we propose a Γ(8) conduction band symmetry in WZ GaAs. We suggest a method for quantifying the optical quality of NWs, taking into consideration the difference between the room and low temperature integrated PL intensity, and demonstrate that Au-assisted GaAs/AlGaAs core-shell NWs can have high PL brightness up to room temperature.

Optimization towards high density quantum dots for intermediate band solar cells grown by molecular beam epitaxy

We report high density quantum dots (QDs) formation with optimized growth temperature and V/III ratio. At lower growth temperature, QD density is increased, due to smaller surface migration length of In adatoms. With higher V/III, the QD density is higher but it results in large clusters formation and decreases the QD uniformity. The QD solar cell was fabricated and examined. An extended spectral response in contrast to the GaAs reference cell was presented but the external quantum efficiency at energies higher than GaAs band gap is reduced, resulting from the degradation for the emitter above the strained QD layers.

Wurtzite GaAs/AlGaAs core–shell nanowires grown by molecular beam epitaxy

We report the growth of GaAs/AlGaAs core-shell nanowires (NWs) on GaAs(111)B substrates by Au-assisted molecular beam epitaxy. Electron microscopy shows the formation of a wurtzite AlGaAs shell structure both in the radial and the axial directions outside a wurtzite GaAs core. With higher Al content, a lower axial and a higher radial growth rate of the AlGaAs shell were observed. Room temperature and low temperature (4.4 K) micro-photoluminescence measurements show a much higher radiative efficiency from the GaAs core after the NW is overgrown with a radial AlGaAs shell.

Controlling crystal phases in GaAs nanowires grown by Au-assisted molecular beam epitaxy.

Control of the crystal phases of GaAs nanowires (NWs) is essential to eliminate the formation of stacking faults which deteriorate the optical and electronic properties of the NWs. In addition, the ability to control the crystal phase of NWs provides an opportunity to engineer the band gap without changing the crystal material. We show that the crystal phase of GaAs NWs grown on GaAs(111)B substrates by molecular beam epitaxy using the Au-assisted vapor-liquid-solid growth mechanism can be tuned between wurtzite (WZ) and zinc blende (ZB) by changing the V/III flux ratio. As an example we demonstrate the realization of WZ GaAs NWs with a ZB GaAs insert that has been grown without changing the substrate temperature.

Positioning effects on quantum dot solar cells grown by molecular beam epitaxy

We report current-voltage and spectral response characteristics of high density InAs/GaAs quantum dot (QD) solar cells with different positions where dots are located. The short circuit current density (Jsc), open circuit voltage (Voc), and external quantum efficiency of these cells under air mass 1.5 are presented and compared with a GaAs reference cell. An extended photoresponse in contrast to the GaAs reference cell was confirmed for all these cells. The effect of inserting QD layers into emitter and base region on device performance is shown. The Jsc is reduced, while the Voc is maintained. The cell with QDs located toward the base side shows better performance, confirmed by both current-voltage and spectral response measurements.

Engineering Parallel and Perpendicular Polarized Photoluminescence from a Single Semiconductor Nanowire by Crystal Phase Control

We report on a crystal phase-dependent photoluminescence (PL) polarization effect in individual wurtzite GaAs nanowires with a zinc blende GaAsSb insert grown by Au-assisted molecular beam epitaxy. The PL emission from the zinc blende GaAsSb insert is strongly polarized along the nanowire axis while the emission from the wurtzite GaAs nanowire is perpendicularly polarized. The results indicate that the crystal phases, through optical selection rules, are playing an important role in the alignment of the PL polarization in nanowires besides the linear polarization induced by the dielectric mismatch. The strong excitation power dependence and long recombination lifetimes ( approximately 4 ns) from the wurtzite GaAs and zinc blende GaAsSb-related PL emission strongly indicate the existence of type II band alignments in the nanowire due to the presence of nanometer thin zinc blende segments and stacking faults in the wurtzite GaAs barrier.