Boris Kühl

Identification of serum proteins bound to industrial nanomaterials

Nanoparticles (NPs) are decorated with proteins and other biomolecules when they get into contact with biological systems. The presence of proteins in cell culture medium can therefore have effects on the biological outcome in cell-based tests. In this study, the manufactured nanomaterials silicon dioxide (SiO(2)), titanium dioxide (TiO(2)), iron-III-oxide (Fe(2)O(3)), and carbon black (CB) were used to study their interaction with single proteins from bovine and human plasma (albumin, fibrinogen and IgG) as well as with complete human serum. The protein binding capacity of the material was investigated and 1D gel electrophoresis was used to separate the bound proteins and to identify the bands by matrix-assisted laser desorption/ionisation-time-of-flight (MALDI-TOF) mass spectrometry. We found that the NP surface chemistry had a great impact on the amount of bound protein with distinct ligands for each of the tested particles. The hydrophobic CB NPs bound much more protein than the hydrophilic metal oxide NPs. Among the single proteins investigated, fibrinogen showed the strongest affinity for SiO(2), TiO(2) and CB NPs. The identified proteins from human serum adsorbed to these NPs were very different. Only apolipoprotein A1 was found to be adsorbed to all NPs. These studies will help to explain the different degree of biological responses observed after in vitro exposure of cells in the absence or presence of serum and might also support the interpretation of in vivo experiments were NPs come directly into contact with blood plasma.

Analysis of non-covalent protein complexes by capillary electrophoresis--time-of-flight mass spectrometry.

A capillary electrophoresis-electrospray ionisation time-of-flight mass spectrometry (CE-ESI-TOF-MS) method for characterisation of non-covalent protein complexes is described using a coaxial liquid sheath-flow sprayer. The CE capillary was connected to the mass spectrometer using a commercial CE-MS sprayer mounted on a ceramic holder of the ESI interface of the mass spectrometer. Using myoglobin (Mb) as an example of non-covalent protein complex, the effect on complex stability caused by organic modifiers added to the sheath liquid was analysed. Depending on the amount of methanol, either intact Mb or the apoprotein and the prosthetic heme group were detected.

Trehalose lipid biosurfactants produced by the actinomycetes Tsukamurella spumae and T. pseudospumae.

Actinomycetales are known to produce various secondary metabolites including products with surface-active and emulsifying properties known as biosurfactants. In this study, the nonpathogenic actinomycetes Tsukamurella spumae and Tsukamurella pseudospumae are described as producers of extracellular trehalose lipid biosurfactants when grown on sunflower oil or its main component glyceryltrioleate. Crude extracts of the trehalose lipids were purified using silica gel chromatography. The structure of the two trehalose lipid components (TL A and TL B) was elucidated using a combination of matrix-assisted laser desorption/ionization time-of-flight/time-of-flight/tandem mass spectroscopy (MALDI-ToF-ToF/MS/MS) and multidimensional NMR experiments. The biosurfactants were identified as 1-α-glucopyranosyl-1-α-glucopyranosid carrying two acyl chains varying of C4 to C6 and C16 to C18 at the 2′ and 3′ carbon atom of one sugar unit. The trehalose lipids produced demonstrate surface-active behavior and emulsifying capacity. Classified as risk group 1 organisms, T. spumae and T. pseudospumae hold potential for the production of environmentally friendly surfactants.

Quartz crystal microbalance with dissipation coupled to on-chip MALDI-ToF mass spectrometry as a tool for characterising proteinaceous conditioning films on functionalised surfaces.

Proteinaceous conditioning films (pCFs) are thought to play a key role in microbial adhesion, leading to the fouling of technical and biomedical devices and biofilm formation, which in turn causes material damage or persistent infections, respectively. However, little is definitively known about the process of surface conditioning via proteins. Herein, we demonstrate the potential of quartz crystal microbalance with dissipation coupled to MALDI-ToF mass spectrometry (QCM-D-MALDI) to investigate protein adsorption on different surfaces, enabling both the monitoring of CF formation and the determination of the molecular composition of CFs. After running QCM-D experiments, a subsequent tryptic on chip digestion step allows the identification of the proteins deposited on the sensor chip surface via MALDI-ToF mass spectrometry. Prominent blood plasma proteins, i.e., human serum albumin (HSA), fibrinogen (FG) and fibronectin (FN), were used. Chemically well defined sensor surfaces were prepared, among others, via self-assembled monolayer (SAM) technology. In cases where protein adsorption was observed by QCM-D, the adsorbed proteins were clearly detected and identified using MALDI-ToF/MS for both single-protein solutions of HSA, FG and FN as well as for protein mixtures. However, for equimolar protein mixtures on TiO2 surfaces, only signals attributed to FG and FN were observed in the mass spectra. No signals indicating the presence of HSA could be detected. This finding leads to the assumption that only FG and FN attach to the TiO2 sensor surface under the given experimental conditions.

Cationic heterooligopeptides by ficain-catalyzed co-oligomerization of lysine and methionine ethylesters

Oligopeptides are of high importance for various industrial applications, e.g. cosmetical or medical. Homooligomerizations and co‐oligomerizations with anionic amino acid esters are well described but a successful synthesis of cationic heterooligopeptides has been missing so far. The present study reports the ficain‐catalyzed heterooligomerizations of LysOEt with MetOEt, leading to cationic heterooligopeptides with a yield up to 49.5% (w/w). MALDI‐ToF/ToF‐MS analyses proved successful syntheses of cationic heterooligopeptides with a DP between 7 and 10 amino acid residues, with the enzyme exhibiting a clear preference for methionine. Copyright

A new data processing routine facilitating the identification of surface adhered proteins from bacterial conditioning films via QCM-D/MALDI-ToF/MS

AbstractConditioning films are an important factor in the initiation and development of microbial biofilms, which are the leading cause of chronic infections associated with medical devices. Here, we analyzed the protein content of conditioning films formed after exposure to supernatants of cultures of the human pathogen Pseudomonas aeruginosa PAO1. Adhesion of substances from the supernatant was monitored using quartz crystal microbalance with dissipation monitoring (QCM-D) sensor chips modified with the commonly used implant material titanium dioxide (TiO2). Attached proteins were identified after on-chip digestion using matrix-assisted laser desorption/ionization (MALDI) time of flight (ToF) mass spectrometry (MS), and a new data processing tool consisting of an XML-database with theoretical tryptic peptides of every PAO1 protein and PHP scripts. Sub-databases containing only proteins, that we found in all replicates, were created and used for MS/MS precursor selection. The obtained MS/MS peaklists were then matched against theoretical fragmentations of the expected peptide sequences to verify protein identification. Using this approach we were able to identify 40 surface-associated proteins. In addition to extracellular proteins such as adhesins, a number of intra-cellular proteins were identified which may be involved in conditioning film formation, suggesting an as-yet unidentified role for these proteins, possibly after cell lysis. Graphical AbstractFlowchart of the method