Bosiljka Šaravanja

Shield effect of functional interlining fabric

Abstract Electromagnetic interference (EMI) have become very serious in a variety of different electronic equipments, such as personal computers (frequency at several GHz), mobile devices (0.9 – 2.4 GHz) and similar. This imposes the need for setting boundaries for EM emission of electric and electronic devices in order to minimize the possibility of interference with radio and wireless communications. Functional textiles can offer protective properties against EM radiation. The aim of this study is to investigate the degree of protection against EM radiation provided by polyamide copper-coated interlining fabric before and after dry cleaning treatment. EM protection efficiency of the interlining functional fabric is explored on both sides at the frequencies of 0.9; 1.8; 2.1 and 2.4 GHz. The results obtained have shown that the interlining fabric has good protective properties against EM radiation, but after dry cleaning, treatment reduction is observed. Scanning electron microscopy micrographs of the interlining surface confirms shield effect decline due to degradation and firing of the copper layers during the process of dry cleaning.

The Impact of Dry and Wet Cleaning on Fabric Electromagnetic Field Shield Effect

The aim of this research is to investigate shield effect properties of the fabrics with inox yarns included in the construction, which are used for special professional garments and should protect from electromagnetic microwave irradiation. The investigation was done prior to and after the professional care procedures of dry and wet cleaning in ten cleaning cycles. Shield effect measurements were done on the face and on the back of the fabric, weftwise and warpwise, prior to and after the first, third, fifth, seventh and tenth cycles of dry and wet cleaning, at the frequencies from 0.9 to 2.4 GHz. The results obtained indicated that shield effect of the fabric tested was reduced after professional care procedures, especially so after 5 cycles. The investigations also revealed that shield effect could be considerably enhanced if the inox yarns were incorporated into the fabric in the direction of the warp.